HIF or host interface is responsible for transmit
and receive packets between physical ethernet
interfaces and HIF library defined logical interfaces.
This patch initialise that host interface and MAC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add some hardware specific macros
and functions that will be used by the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When OS sends more packets than are being read with a single
'rte_eth_rx_burst' call, rx packets are getting stucked in the tap pmd
and are unable to receive, because trigger_seen is getting updated
and consecutive calls are not getting any packets.
Do not update trigger_seen unless less than a max number of packets were
received allowing next call to receive the rest.
Remove unnecessary compiler barrier.
Fixes: a0d8e807d9 ("net/tap: add Rx trigger")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Tested-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Flow Manager API is the new firmware interface that exposes match
action capabilities in 1400 series VIC adapters. It is intended for
virtual switch offloads and enables more advanced features than the
existing filter API. For example, it supports VXLAN encap and decap
actions, and exposes TCAM and exact match tables.
Add the new flow implementation using Flow Manager and use it when
available. When Flow Manager is not available, the driver will
continue to use the old filter-based flow implementation.
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Latest firmware supports Geneve with options offload. Current overlay
offload only supports Geneve with no options. This new feature is
disabled by default, as it is intrusive and cannot be used with flow
API. Add a new devarg 'geneve-opt' so the user can explicitly enable
it.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Both primary and secondary processes may call the queue start/stop,
link update handlers. These functions use the rte_eth_dev pointer
cached in the adapter private data (struct enic). But, this pointer is
valid only in the primary process, as rte_eth_dev addresses may differ
in different processes. Using that cached pointer in secondary
processes leads to a crash.
For the link update handler (enic_link_update), use the rte_eth_dev
pointer passed down from the rte layer as it is valid in the current
process. For the queue start/stop handlers (enic_start_wq and
friends), cache the rte_eth_dev_data pointer in the adapter private
data, and use that. rte_eth_dev_data is in shared memory and its
address is same across processes.
Fixes: 837e68ae94 ("net/enic: fix queue stop and start")
Fixes: cf8d9826b7 ("net/enic: extract code for checking link status")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Only the primary process initializes the adapter private data and
rte_eth_dev_data. For secondary processes, do not touch them.
Secondary processes need to select the right Tx and Rx handlers. Pick
the same handlers that the primary process uses.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Patch adds a runtime function to display port supported ptypes
in different layers.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Use correct flag for indicating QinQ strip rx offload.
Fixes: dfebfc9882 ("ethdev: support dynamic configuration of QinQ strip")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to parse GTPU flag for RSS hash index calculation in
octeontx2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding support to enable GTPU eth flow type for RSS hash
index calculation.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MC firmware is the core component of FSLMC bus and net/DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add definitions of maximal data length in module EEPROM,
values are compatible with include/uapi/linux/ethtool.h.
These definitions can be used by application to validate data length.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 76d29903f5 ("bond: support link status interrupt")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
On rare situation test_link_bonding test case fail due to timespec
tv_nsec overflow, which causes pthread_cond_timedwait to return EINVAL
and test to fail.
Fixes: 76d29903f5 ("bond: support link status interrupt")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Traffic bps statistics is very useful for performance testing.
Add bits per second statistics for Rx and Tx.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Moti Haimovsky <motih@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_ah in order to match the Authentication Header
based on RFC 2402.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_igmp in order to match the Internet Group
Management Protocol based on RFC 2236.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_nsh in order to match the network service header
based on RFC 8300.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The receive queues list size is based on the size of uint32_t, so
when allocating the memory, the correct value should be used. Or
else there is risk to corrupt the memory, depending on the queues
number, because there is some pad area for alignment. If the queue
number is not large enough, the issue couldn't be observed.
Fixes: dc9ceff73c ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Item order validation between L2 and L3 is missing, which leading to
the following flow rule is accepted:
testpmd> flow create 0 ingress pattern ipv4 / eth / end actions drop /
end
Only the outer L3 layer should check whether the L2 layer is present,
because the L3 layer could directly follow the tunnel layer
without L2 layer.
Meanwhile inner L2 layer should check whether there is inner L3 layer
before it.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
On x86, iopl permissions are only available to root user (or users that
have the CAP_SYS_RAWIO capability).
But those permissions are only needed when the virtio devices accesses
are done with inb/outb instructions, which is when the device is bound
to a UIO kernel module.
So far, the virtio driver was refusing to register based on the check
on IO permissions.
This check does not make sense when binding the device to vfio.
Now that the check on IO permissions has been abstracted in the ioport
API, we can remove it on virtio side.
We still need to call rte_eal_iopl_init() in the virtio constructor so
that the interrupt thread inherits this permission in the case it could
be used with UIO later.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Tiwei Bie <tiwei.bie@intel.com>
On x86, calling inb/outb special instructions (used in UIO ioport
read/write parts) is only possible if the right IO permissions has been
granted.
The only user of this API (the net/virtio pmd) checks this
unconditionnaly but this should be hidden by the rte_pci_ioport API
itself and only checked when the device is bound to a UIO driver.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We are using '--base-virtaddr' in a few places. We have a define for that,
so use it instead.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
According to our docs, only Linuxapp supports base-virtaddr option.
That is, strictly speaking, not true because most of the things
that are attempting to respect base-virtaddr are in common files,
so FreeBSD already *mostly* supports this option in practice.
This commit fixes the remaining bits to explicitly support
base-virtaddr option, and moves the arg parsing from EAL to common
options parsing code. Documentation is also updated to reflect
that all platforms now support base-virtaddr.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The makefile in drivers/bus/pci specified rte_ethdev as a dependency for
the library. However there are no actual symbols from librte_ethdev used
in librte_bus_pci.
Including librte_ethdev as a dependency only becomes a problem in some
niche cases like when attempting to build the rte_bus_pci library as a
shared object without building the rte_ethdev library.
I specifically ran into this when trying to build the DPDK included as
an SPDK submodule on a FreeBSD machine. I figure that since there are no
real dependencies between the two, we should enable building
librte_bus_pci without librte_ethdev.
Fixes: c752998b5e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Seth Howell <seth.howell@intel.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Sanity test could spuriously fail with reporting flush count error.
It was caused by worker stat coherent issue between distributor and
worker thread.
Fix this issue by using atomic operations to update worker stat.
Fixes: c3eabff124 ("distributor: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Distributor and worker threads rely on data structs in cache line
for synchronization. The shared data structs were not protected.
This caused deadlock issue on weaker memory ordering platforms as
aarch64.
Fix this issue by adding memory barriers to ensure synchronization
among cores.
Bugzilla ID: 342
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
The "in" keyword was introduced in meson 0.49, which means we need to use
an old-fashioned loop to check the array of disabled drivers.
Fixes: 6f80f1cd22 ("build: support disabling drivers with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Memory required for the mempool objects need not be physically
contiguous on octeontx2's HW, mempool pmd supports the minimum chunk
size set by the default handler. Hence discarding the limitation set
by the pmd on the min_chunk_size value.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds tests for encrypted digest AES-CTR + AES CMAC using
mixed auth-cipher algorithm functions. Tests allow easy
extending with new cases, check in-place and
out-of-place operations and use linear and sgl
buffers as input/output.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
CAAM JR can work on both LE and BE mode.
Latest platforms are in LE mode, so changing the
default mode to LE to make it more convenient for
the latest platforms.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Polling of MMIO register could misreport the actual value
set dynamically in hardware as the variable was not set explicitly
to volatile integer.
Fixes: efd453698c ("baseband/fpga_lte_fec: add driver for FEC on FPGA")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
A change to PCI mapping assumption was missed earlier, this causes
probing to fail with the fpga_lte_fec PMD when checking for name
of the rte_driver (not set yet) instead of the rte_pci_driver.
Fixes: 391797f042 ("drivers/bus: move driver assignment to end of probing")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
AES-CMAC is used in 3gpp specifications hence it is needed
to support 4 byte digest.
Fixes: 91c1daa4e1 ("crypto/qat: support AES-CMAC")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This commit adds RSA tests to Intel QuickAssist Technology pmd
and OpenSSL pmd test suite for session and session-less cases
when PADDING_NONE selected
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds option to use asymmetric crypto pmd with
session-less support.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
