Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
There has been support for similar action PORT_ID for
some time already, but this action will be deprecated.
Support action REPRESENTED_PORT before the transition.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
There's been support for similar actions PHY_PORT and PORT_ID
for some time already, but these actions are being deprecated.
Support action REPRESENTED_PORT to prepare for the transition.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add multi-seg support for Inline IPsec.
Also in reassembly, FI_PAD is not required to compute pointer to
Fragment info because it is only at CPT_PARSE_HDR_S + FI_OFFSET * 8
and is always 8B aligned.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Enable ESN and anti-replay in IPsec capabilities
Add support for session update security API
Fix the CPT command population for ESN enabled case
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Limit port specific SA table size to 1 entry when not used.
This is useful when inline device is enabled as then
Port specific SA table will not be used for Inline IPsec
inbound processing.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Wait for CPT flow control on WQE path. This is to
avoid CPT queue overflow and thereby a CPT misc
interrupt.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Enable below ciphers and auths as part of capabilities for inline IPsec
AES_CTR, AES_XCBC_MAC, AES_GMAC.
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Add capabilities for HMAC_SHA2 and udp encap for 9k
security offload in inline mode.
Set explicit IV mode in IPsec context when IV is provided by the
application
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Use the Full context SA structures and command in IPsec fast path.
For inline outbound, populate CPT instruction as per full context.
Added new macros and functions with respect to full context.
Populate WQE ptr in CPT instruction with proper offset from mbuf.
Also add option to override outbound inline SA IV for debug
Update mbuf length based on IP version in Rx post process purposes
via environment variable.
User can set env variable as:
export ETH_SEC_IV_OVR="0x0, 0x0,..."
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support for zero aura for inline meta packets and register
callback to ROC to create meta pool via mempool. Also
add devargs to override meta buffer count and size.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Similar to other RQ's, delay inline device RQ until dev is started
to avoid traffic reception when device is stopped.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Limit meta AURA workaround to CN10K A0.
Also other NIX and Inline related Erratas applicable for CN10K A1.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Fix missing FC wait for outbound path in vector mode.
Currently only poll mode has it.
Fixes: 358d02d20a ("net/cnxk: support flow control for outbound inline")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
A recent change removed errno.h from rte_common.h.
x86 EAL headers seem to include it (probably via
rte_spinlock/rte_cpuflags) but other architectures won't.
Add an explicit inclusion.
Fixes: d826133ae8 ("net/octeon_ep: support CN10K SoC")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add FC check in vector event Tx path, the check needs to be
performed after head wait right before LMTST is issued.
Since, SQB pool FC updates are delayed w.r.t the actual
utilization of pool add sufficient slack to avoid overflow.
Added a new device argument to override the default SQB slack
configured, can be used as follows:
-a 0002:02:00.0,sqb_slack=32
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add support to enable PTP per ethernet device when that
specific ethernet device is connected to event device via
Rx adapter.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
This patch adds the required functionality in the Octeon endpoint
driver to support the CN10K endpoint device. It adds the CN10K SoC
specific routines to configure, enable, and disable input and output
queues to establish basic data transfers.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Added functionality to update link speed, duplex mode and link state.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Acked-by: Veerasenareddy Burru <vburru@marvell.com>
This patch renames octeon end point driver from octeontx_ep to
octeon_ep to enable single unified driver to support current
OcteonTx and future Octeon PCI endpoint NICs to reflect common
driver for all Octeon based PCI endpoint NICs.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Acked-by: Veerasenareddy Burru <vburru@marvell.com>
Add to read link status register of UTP mode, to ensure link status of
mixed mode, for YT PHY.
Fixes: 1c44384fce ("net/ngbe: support custom PHY interfaces")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Remain the same max frame size after the device restarts.
Fixes: 07baabb6a5 ("net/ngbe: support MTU set")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since firmware does not use the semaphore between software and firmware.
Remove useless unilateral semaphore setting.
Fixes: f501a195bd ("net/ngbe: initialize and validate EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Rename rx_oversize_errors to rx_oversize_cnt since it depends on giant
packet size limit instead of MTU, by hardware design.
Rename rx_drop_packets and tx_drop_packets to rx_dma_drop and tx_dma_drop
to indicate the drop location.
And add tx_dma_drop to extended statistics.
Fixes: 8b433d04ad ("net/ngbe: support device xstats")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Rename rx_oversize_errors to rx_oversize_cnt since it depends on giant
packet size limit instead of MTU, by hardware design.
Rename rx_drop_packets to rx_rdb_drop to indicate the drop location.
And add rx_dma_drop to extended statistics.
Fixes: 91fe49c87d ("net/txgbe: support device xstats")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since firmware does not use the semaphore between software and firmware.
Remove useless unilateral semaphore setting.
Fixes: 35c90ecccf ("net/txgbe: add EEPROM functions")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Convert the correct packet type and flow type, to fix IPv6 rule in FDIR.
Fixes: b973ee2674 ("net/txgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Prepend `0x` to the NFP HWINFO header value that is printed to improve
the readability of the printed statement.
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Previously the nfp driver has supported NFP chips with the Netronome
PCIe ID. This patch extends the PMD to also support NFP chips with the
Corigine PCIe vendor ID (0x1da8), which at this point are assumed to be
otherwise identical from a software perspective.
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Nfp log print was controlled by nfp's own macro before. This
commit changes to use dpdk debug rx/tx macro to control it.
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Nfp cpp log print is not available before. Add support for cpp
print log and set its initial priority to "NOTICE".
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Removed freeing of mbuf in scattered Rx as it should not be freed in rx.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Updated the logic to remove the extra increments of the variables.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Updated pkt_len and data_len in the last segment of the packet.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Error check needs to be done only for last segment of Jumbo packet.
Freed first_seg and reset eop to 0 in error case
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Remove deprecated fdir_conf from device configuration.
Assume that mode is equal to RTE_FDIR_MODE_NONE.
Add internal Flow Director configuration copy in ixgbe and txgbe device
private data since flow API supports requires it. Initialize mode to
the first flow rule mode on the rule validation or creation.
Since Flow Director configuration data types are still used by some
drivers internally, move it from public API to ethdev driver internal
API.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Dongdong Liu <liudongdong3@huawei.com>
