Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add basic management functions for the generic flow API (validate, create,
destroy, flush, query and list). Flow rule objects and properties are
arranged in lists associated with each port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Use the functions introduced in the previous commit to dump the offload
flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In addition to the packet type returned by the PMD, also display the
packet type calculated by parsing the packet in software. This is
particularly useful to compare the 2 values.
Note: it does not mean that both hw and sw always have to provide the
same value, since it depends on what hardware supports.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
A packet is tunnelled if the tunnel type is identified or if it has
an inner part.
Fix also some typos in RTE_PTYPE_INNER_L3_MASK and IP comments.
Fixes: f295a00a2b ("mbuf: add definitions of unified packet types")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If double vlan is detected, its stripped flag and vlan tags can be
printed on rxonly mode. Test command of 'tx_vlan set' is expanded
to set both single and double vlan tags on TX side for each packets
to be sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In test-pmd (rxonly.c), the code is able to dump the list of ol_flags.
The issue is that the list of flags in the application has to be
synchronized with the flags defined in rte_mbuf.h.
This patch introduces 2 new functions rte_get_rx_ol_flag_name()
and rte_get_tx_ol_flag_name() that returns the name of a flag from
its mask. It also fixes rxonly.c to use this new functions and to
display the proper flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Extended fdir info is printed in rxonly fwd engine when fdir match.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add two commands to test VXLAN packet identification.
The test steps are as follows:
1> use commands to add/delete VxLAN UDP port.
2> use rxonly mode to receive VxLAN packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
The offload flags field (ol_flags) was 16-bits and had no further room
for expansion. This patch increases the field size to 64-bits, using up
the remaining reserved space in the single-cache-line mbuf.
NOTE: none of the values for existing flags have been changed, i.e. no
new numbers have been explicitly reserved between existing flag
definitions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The vlan_macip structure combined a vlan tag id with l2 and l3 headers
lengths for tracking offloads. However, this structure was only used as
a unit by the e1000 and ixgbe drivers, not generally.
This patch removes the structure from the mbuf header and places the
fields into the mbuf structure directly at the required point, without
any net effect on the structure layout. This allows us to treat the vlan
tags and header length fields as separate for future mbuf changes. The
drivers which were written to use the combined structure still do so,
using a driver-local definition of it.
Reduce perf regression caused by splitting vlan_macip field. This is
done by providing a single uint16_t value to allow writing/clearing
the l2 and l3 lengths together. There is still a small perf hit to the
slow path TX due to the reads from vlan_tci and l2/l3 lengths being
separated. (<5% in my tests with testpmd with no extra params).
Unfortunately, this cannot be eliminated, without restoring the vlan
tags and l2/l3 lengths as a combined 32-bit field. This would prevent
us from ever looking to move those fields about and is an artificial tie
that applies only for performance in igb and ixgbe drivers. Therefore,
this patch keeps the vlan_tci field separate from the lengths as the
best solution going forward.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
