Unknown unicast filter creation may fail because of insufficient
permissions on VF. This failure is handled internally in libefx MAC
reconfiguration without any way for a user to know if it happened.
Making the MAC reconfiguration forward error code of filter
reconfiguration would be too destructive to the existing code
that may rely on the function never returning that error.
Add an API for getting the status of current unknown unicast and
all multicast filters since user must know that requested
filters are actually applied.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Make user filters a priority in EF10 datapath. When a manual
filter with a specification that is equal to an existing auto
filter is inserted, the manual filter:
- replaces auto filter if the specification is exclusive;
- is inserted along existing auto filter otherwise;
In the first case the auto filter that was replaced is saved.
This saved filter can be updated on filter reconfiguration and
is restored on the manual filter removal.
Fixes: e7cd430c864f ("net/sfc/base: import SFN7xxx family support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement the efx_proxy_auth_privilege_mask_get() to get a function's
privilege mask and efx_proxy_auth_privilege_modify() to add/remove
privileges for a function specified by PF and VF index.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Hypervisor should be able to track VF statistics.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement functions to set vPort VLAN and MAC address and reset the vPort.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement the APIs for PROXY_CMD, PROXY_COMPLETE and PRIVILEGE_MASK
messages to allow client drivers authorize VF operations like set MAC,
set MTU etc. with firmware.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
VMware expects that certain kind of configurations made on the VFs are
authorized by the ESXi before these are applied e.g. assigning a MAC
address to the VF, setting MTU etc. Firmware supports a feature called
MCDI proxy which will be used to implement this authorization check.
The proxy auth module is governed by EFSYS_OPT_MCDI_PROXY_AUTH switch.
This patch adds the framework for proxy auth module along with the APIs
required for SR-IOV initialization.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The vSwitch create API takes an array of num_vports client driver
allocated vPort config entries where entry at index 0 contains the PF
configuration and rest num_vports-1 entries refer to vPort configuration
for VFs 0 to (num_vports-2). The required hierarchy
(vswitch/vport/vadaptor) is created within this API. The destroy API
tears down this hierarchy and releases memory for the vSwitch object.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement functions to allocate and free vSwitch, vPort and vAdaptor.
Also, implement functions to add and delete vPort MAC address and EVB
port assign.
Most of the efx_evb_ops_t functions take vSwitch ID as a parameter for
future enhancements. Currently, firmware doesn't implement vSwitch
identifier and hence this parameter is unused for EF10 architecture
implementation.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement the framework for Enterprise Virtual Briding (EVB) module.
SR-IOV augments the software virtual switch with NIC capabilities
supported from EVB module.
Further patches will add APIs to create and destroy EVB switching
hierarchy required for SR-IOV and APIs to set vPort properties like MAC,
VLAN etc.
Signed-off-by: Gautam Dawar <gdawar@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Request firmware updates be performed in background mode.
In this mode MCDI to the function processing the update
remains accessible and the client polls for completion.
This is supported for lengthy partition updates such as
MCFW and bundles. The MC ignores the flags used for this
mode for other partition updates.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Old NVRAM info API required function prototype too often.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add function to query partition characteristics.
Refactor efx_nvram_size to share implementation.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Includes the partition read-only flag, to allow for
checks before opening the partition.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support the registration of a version string by the libefx
client. The string is passed on to the MC in efx_nic_probe
only to allow the MC to advertise the OS driver version in
NC-SI, and the content is considered opaque for libefx.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move duplicate macro to increment per-event type stats to
internal header. These stats are NIC family independent and
stored in generic event queue structure.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Include efx_mcdi.h from main internal header efx_impl.h directly
instead of indirect inclusion via family-specific header.
It avoids duplication and fixes Medford and Medford2 cases where
the header inclusion is lost.
Correctness is still guaranteed by checks in efx_check.h which
require EFSYS_OPT_MCDI for corresponding families and do not
allow to enable the option if no family requires it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add EFX_FAMILY_IS_EF10() which may be used as synonym of any EF10-based
NIC family (i.e. Huntigton, Medford or Medford2 at the time of addition).
Suggested-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add EFX_OPTS_EF10() which may be used as synonym of any EF10-based
NIC (i.e. Huntigton, Medford or Medford2 at the time of addition).
Suggested-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The recently added NO_CONT_EV mode is recommended for when looking for
maximum throughput on 100G links as it allows the firmware to operate
more efficiently. The biggest benefit is when using scatter and jumbo
frames, but it is also necessary to achieve line rate in other cases.
Support for NO_CONT_EV when scatter is disabled is simple - the main
datapath change is to always read the packet length from the prefix,
not the event. This requires storing a flag with the event queue so
the event handler knows NO_CONT_EV mode is in use.
Supporting NO_CONT_EV with scatter would require an API change.
(Now the ee_flags field in efx_evq_t is used on the datapath, move it
next to other fields which are also read on the datapath to try to avoid
reading an additional cache line.)
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a function which makes an MCDI GET_LINK request and
packages up the results. Currently, the get-link function
is triggered from several entry points which then pass
on or store selected parts of the data. When the driver
needs to obtain the current link state, it is more
efficient to do this in a single call.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The efx_nic_hw_unavailable() checks ensure that if the NIC hardware
has failed or has been physically removed then libefx will stop
further attempts to access the hardware.
Add an interface for libefx clients to force unavailability, so the
hardware is treated as dead or removed even if still physically present.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add efx_nic_hw_unavailable() routine to check for hardware presence
before continuing with NIC operations.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The SFN driver's PartitionControl WMI object requires an API to parse
and filter partition data in TLV format, particularly for the Dynamic
Config partition. The ef10_nvram_buffer functions provide this
functionality but are tied to use with license partition only.
Modify functions so they are applicable to all TLV partitions and add
functions to support in-place tag modification.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Equal stride super-buffer Rx mode is supported by DPDK firmware
variant. One Rx descriptor provides many Rx buffers to firmware.
Rx buffers follow each other with specified stride.
Also it supports head of line blocking with timeout to address
drops when no Rx descriptors are available. So it gives extra time
to the driver to provide Rx descriptors before drop.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The type is an internal interface. Single integer is insufficient
to carry RxQ type-specific information in the case of equal stride
super-buffer Rx mode (packet buffers per bucket, maximum DMA length,
packet stride, head of line block timeout).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Set outer_ip_id in the TX option descriptor for encapsulated packets.
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Medford2 uses a configurable VI window size, and requires
updates to register accesses to use a runtime VI window size
rather than the *_STEP register constants used for earlier
controllers.
Update the common code to query the VI window size via MCDI,
and add new EFX_BAR_VI_* accessor macros for per-VI registers.
The existing EFX_BAR_TBL_* macros can be used for non-VI
register tables (and for code that can never be called for
a Medford2 controller e.g. Siena-only code).
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
HW needs to know which UDP packets should be treated as tunnel
encapsulation to do inner packet recognition, classification and
offloads.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Encoding packed stream buffer size in RxQ type is not a future-proof
idea taking into account a new RxQ types with extra parameters.
To be consistent make packet stream buffer size a separate parameter.
In order to avoid blowing of the default RxQ create function prototype
add a dedicated function to create packed stream RxQ without not
applicable paramters.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
Rx scatter may be applicable to different Rx queue types.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
Falcon support has been withdrawn from libefx, however, there is still
an obsolete Falcon-specific assertion that efx_mac_stats_upload()
and efx_port_poll() aren't concurrent. To be consistent with an overall
Falcon support revocation it's desirable to remove it.
Fix debug build invalid assertion failure.
Fixes: 19b64c6ac35f ("net/sfc/base: import libefx base")
Fixes: 8c7c723dfe7c ("net/sfc/base: import MAC statistics")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The compilation failed because __efx_sram_pattern_fns was used in
efx_nic.c, but defined in efx_sram.c which is only needed when
supporting Siena.
To fix it move all the code using __efx_sram_pattern_fns into
Siena-specific files (except for the definition in efx_sram.c itself,
as that file only needs to be included in Siena-supporting builds
anyway).
The functions to test registers and tables are unlikely to apply to any
new hardware and so can be moved into Siena files. Since Huntington
such tests have been implemented in firmware.
Fixes: 7571c3168798 ("net/sfc/base: import diagnostics support")
Cc: stable@dpdk.org
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Packed stream Rx datapath requires access to packed stream state
stored in event queue. Number of credits is upstead in event handler
on a new buffer, packets parsing on 64k boundary crossing and
Rx doorbell push to give credits back.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Read existing flash content before writing, so the flash write can be
avoided if the existing partition content matches the new image. This
avoids unnecessary write cycles for the flash device, and may also be
faster. If the flash does need to be updated, verify the content after
writing.
Note that reading the flash content after writing but before calling
efx_nvram-rw_finish() avoids firmware bug68170, which can lead to
signed image updates failing on Medford.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tracking which partition is locked avoids being overly conservative
when EFX_NVRAM_xxx maps to more than one partition (depnding on the
current port number).
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
