In case DPAA FMAN configuration tool (FMC) is not available,
the system can still work with default queue(1 queue per port).
This patch also fixes some logs related to FQ ids, which were
idetified while testing this support.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for configurable vdqcr exact flag.
This boost the performance, however this can give
side effects for some extra packet fetch. Which has been
taken care in the patch as well.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Avoid array of fq as packets are dq only from a single q.
Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch fixes prefetch rx routine to
set the next prefetch request to the size of nb_pkts.
It assumes that next request would ideally be
of same size.
Fixes: 4bc5ab88db ("net/dpaa2: fix Tx only mode")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The configuration value indicating that KNI was build was incorrect,
causing the driver to never be built.
Fixes: 3479586fe6 ("net/kni: add to meson build")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When compiling with meson, extra warnings are enabled about casting from
integers to different size pointers. This triggers an error in AVP as the
addition of the offset to the pointer address causes the result to be a
64-bit integer which doesn't fit a 32-bit pointer. The fix here is to
explicitly indicate that the offset is of type "uintptr_t" which prevents
any promotion which would cause errors.
Fixes: c0ad584222 ("net/avp: add device initialization")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The sfc driver is not supported on 32-bit so disable in meson in
those cases.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When the bond PMD is stopped, the active slave count is reset.
For 802.3ad mode this potentially leaks memory and clears state since
a second sequential activate_slave() will occur when the bond PMD is
restarted and the LSC callback is triggered while the active slave
count is 0. To fix this, don't clear the active slave count when
stopping. Only deactivate_slave() should be used to clear the slaves.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Set the Rx channel map and ingress queue type properly to allow firmware
to manage the internal mapping correctly.
Fixes: 6c2809628c ("net/cxgbe: improve latency for slow traffic")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Query firmware for max Tx and Rx queues that can be allocated.
Move the code to determine max queues to common place for both
PF and VF.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Enable RSS on IPv4 fragmented packets and IPv6 packets with extension
headers based on 2-tuple hash.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add ops to set link up and down for both PF and VF. If wait_to_complete
is set, poll for link update for up to 10 seconds max.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add action to redirect matched packets to specified egress physical
port without sending them to host.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match packets based on ingress physical port.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to enable hit counters for flows offloaded in HASH
region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to delete offloaded flows in HASH region. Use the
hash index saved during insertion to delete the corresponding flow.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to offload flows to HASH region. Translate internal
filter specification to requests to offload flows to HASH region.
Save the returned hash index of the offloaded flow for deletion later.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
CLIP region holds destination IPv6 addresses to be matched for
corresponding flows. Query firmware for CLIP resources and allocate
table to manage them. Also update LE-TCAM to use CLIP to reduce
number of slots needed to offload IPv6 flows.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch supported match items in HASH region. Ensure the mask
is all set for all the supported match items to be offloaded
to HASH region. Otherwise, offload them to LE-TCAM region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch available HASH filter resources and allocate table for managing
them. Currently only supported on Chelsio T6 family of NICs.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
The macro FM10K_SIMPLE_TX_FLAG was used with old Tx queue flags.
It is no longer used and was forgotten when cleaning old Tx flags.
Fixes: 1778ef67e2 ("net/fm10k: remove dependence on Tx queue flags")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace the BSD license header with the SPDX tag.
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement EF10 ESSB Rx datapath callback to get number of pending
descriptors.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Number of buffers left in completed descriptor may be 0. If so,
all buffers of the descriptor are freed once again.
Fixes: 390f9b8d82 ("net/sfc: support equal stride super-buffer Rx mode")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Support rx of in direction packets only
Useful for apps that also tx to eth_pcap ports in order to not see them
echoed back in as rx when out direction is also captured
Example:
In case using rx_iface and sending *single* packet to eth1
it will loop forever as the when it is sent to tx_iface=eth1
it will be captured again on the rx_iface=eth1 and so on
$RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface=eth1,tx_iface=eth1'
…
---------------------- Forward statistics for port 0 ------------
RX-packets: 758 RX-dropped: 0 RX-total: 758
TX-packets: 758 TX-dropped: 0 TX-total: 758
------------------------------------------------------------------
While if using rx_iface_in it will not be captured on the way out and
be forwarded only once
$RTE_TARGET/app/testpmd l 0-3 -n 4 \
--vdev 'net_pcap0,rx_iface_in=eth1,tx_iface=eth1'
…
---------------------- Forward statistics for port 0 ------------
RX-packets: 1 RX-dropped: 0 RX-total: 1
TX-packets: 1 TX-dropped: 0 TX-total: 1
------------------------------------------------------------------
Signed-off-by: Ido Goshen <ido@cgstowernetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
TCI may contain PCP or DEI bits. Matching of these bits is not
supported, but the bits still may be set in specification value and
not covered by mask. So, these bits should be ignored.
Fixes: 894080975e ("net/sfc: support VLAN in flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Instead of checking the multiple Virtio features bits for
every packet, let's do the check once at configure time and
store it in virtio_hw struct.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
This patch improves the Tx offload features selection depending
on whether the application request for offloads.
When the application doesn't request for Tx offload features,
the corresponding features bits aren't negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The simple Tx path does not comply with the Virtio specification.
Now that VIRTIO_F_IN_ORDER feature is supported by the Virtio PMD,
let's use this optimized path instead.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Starting from rdma-core v19, Mellanox OFED 4.4, the Verbs resources
cleanup is properly activated in plug-out process when setting the
MLX5_DEVICE_FATAL_CLEANUP environment variable to 1.
Set the aforementioned variable to 1.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In the default Rx handler stop processing packets at the end of
the completion ring so that wrapping doesn't have to be checked
in the inner while loop.
Also, check the color bit in the completion without using a conditional.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The default tx handler checks the maximum packet size. Check it in the
prepare handler too. WQ stops working if the app/driver tries to send
oversized packets, so these checks are unavoidable.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add a much-simplified handler that works when all offloads are
disabled, except mbuf fast free. When compared against the default
handler, under ideal conditions, cycles per packet drop by 60+%.
The driver tries to use the simple handler first.
The idea of using specialized/simplified handlers is from the Intel
and Mellanox drivers.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Request one completion update per roughly 32 buffers. It saves DMA
resources on the NIC, PCIe utilization, and cache miss rates.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
WQ is currently using vnic_wq_buf to store mbuf pointers for Tx
packets. But, it contains an unused mempool pointer and mbuf is
unnecessarily cast to void pointer. Remove vnic_wq_buf entirely and
use an mbuf pointer array instead.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The NIC has one configurable VXLAN port, which is set to the default
4789 upon vNIC reset. Adding a non-default port replaces this single
VXLAN port. Deleting the previously added non-default port restores
the VXLAN port to the hardware default.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add a new devarg "ig-vlan-rewrite" to allow the user to set
non-default rewrite mode. The UCS VIC may add/remove/modify the VLAN
header of an ingress packet depending on the ingress VLAN rewrite
mode.
By default, the driver sets the pass-through mode, which tells the NIC
"do not touch VLAN header and preserve it as is". This mode is usually
sufficient, but can complicate deployments for certain environments.
For example, OVS-DPDK in UCS blade environments may want to use "untag
default VLAN mode", which removes the VLAN header from an ingress
packet if it matches vNIC's default VLAN.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Report min/max ring sizes, alignments, and so on, and rely on the
common checks implemented in the rte_ethdev layer.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The fetch index must be initialized only when RQ is
disabled. Otherwise, it may lead to stale entries in IG descriptor
cache on the VIC.
Fixes: a74629cfa3 ("net/enic: enable RQ first and then post Rx buffers")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently, enic_alloc_wq (via rte_eth_tx_queue_setup) may overwrite
the admin limit with a lower value. This is wrong as seen in the
following sequence.
1. UCS admin-set Tx queue limit (config.wq_desc_count) = 4096
2. Set up tx queue with 512 descriptors
The admin limit (config.wq_desc_count) becomes 512.
3. Stop ports and now set up Tx queue with 1024 descriptors.
This fails because 1024 is greater than the admin limit (512).
Do not modify the admin limit, and when queried, report the current
number of descriptors instead of the admin limit. The rx queue setup
(enic_alloc_rq) does not this problem.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The UDP RSS interface has changed in the release firmware for 100G VIC
adapters. The capability bit is now in NIC_CFG. Also the driver is
supposed to use CMD_NIC_CFG_CHK and check if RSS config is
successful. No more changes are expected with respect to UDP RSS API.
Fixes: 94c3518958 ("net/enic: update UDP RSS controls")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fix missing or incorrect packet types discovered by DTS.
- Non-IP inner packets
Set the tunnel flag.
- Inner Ethernet packets
All supported tunnel packets have Ethernet as inner packets. So, set
INNER_L2_ETHER for all tunnel types.
- IPv4 fragments carrying TCP/UDP
The NIC indicates TCP/UDP based on the protocol in IP header. For
fragments, ignore that bit and always set L4_FRAG.
- IPv6 fragments
The NIC does regconize fragments (IPv6 packets with fragment extension
headers). Set packet types for these.
Fixes: 93fb21fdbe ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This commit refines the Rx Packet type flags reported by the PMD
for each packet being received in order to make the report more
accurate.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
rte_eth_rx_descritpr_status and rte_eth_tx_descriptor_status
are supported by fm10K.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For i40evf, internal rx interrupt and adminq interrupt share the same
source, that cause a lot cpu cycles be wasted on interrupt handler
on rx path. This is complained by customers which require low latency
(when set I40E_ITR_INTERVAL to small value), but have to be sufferred by
tremendous interrupts handling that eat significant CPU resources.
The patch disable pci interrupt and remove the interrupt handler,
replace it with a low frequency (50ms) interrupt polling daemon
which is implemented by registering a alarm callback periodly, this
save CPU time significently: On a typical x86 server with 2.1GHz CPU,
with low latency configure (32us) we saw CPU usage from top commmand
reduced from 20% to 0% on management core in testpmd).
Also with the new method we can remove compile option: I40E_ITR_INTERVAL
which is used to balance between low latency and low CPU usage previously.
Now we don't need it since we can reach both at same time.
Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.
Rx path select logic: If IN_ORDER and merge-able are enabled will select
IN_ORDER Rx path. If IN_ORDER is enabled, Rx offload and merge-able are
disabled will select simple Rx path. Otherwise will select normal Rx
path.
Tx path select logic: If IN_ORDER is enabled will select IN_ORDER Tx
path. Otherwise will select default Tx path.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
IN_ORDER Rx function depends on merge-able feature. Descriptors
allocation and free will be done in bulk.
Virtio dequeue logic:
dequeue_burst_rx(burst mbufs)
for (each mbuf b) {
if (b need merge) {
merge remained mbufs
add merged mbuf to return mbufs list
} else {
add mbuf to return mbufs list
}
}
if (last mbuf c need merge) {
dequeue_burst_rx(required mbufs)
merge last mbuf c
}
refill_avail_ring_bulk()
update_avail_ring()
return mbufs list
IN_ORDER Tx function can support offloading features. Packets which
matched "can_push" option will be handled by simple xmit function. Those
packets can't match "can_push" will be handled by original xmit function
with in-order flag.
Virtio enqueue logic:
xmit_cleanup(used descs)
for (each xmit mbuf b) {
if (b can inorder xmit) {
add mbuf b to inorder burst list
continue
} else {
xmit inorder burst list
xmit mbuf b by original function
}
}
if (inorder burst list not empty) {
xmit inorder burst list
}
update_avail_ring()
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
IN_ORDER virtio-user Tx function support Tx checksum offloading and
TSO which also support on normal Tx function. So extracts common part
into separated function for reuse.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add new function for freeing IN_ORDER descriptors. As descriptors will
be allocated and freed sequentially when IN_ORDER feature was
negotiated. There will be no need to utilize chain for freed descriptors
management, only index update is enough.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add parameters for configuring VIRTIO_NET_F_MRG_RXBUF and
VIRTIO_F_IN_ORDER feature bits. If feature is disabled, also update
corresponding unsupported feature bit.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch introduces unsupported features mask for virtio-user device.
For virtio-user server mode, when reconnecting virtio-user will retrieve
vhost device features as base and then unmask unsupported features.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If VIRTIO_F_IN_ORDER has been negotiated, driver will use descriptors in
ring order: starting from offset 0 in the table, and wrapping around at
the end of the table. Also introduce use_inorder_[rt]x flag for
selection of IN_ORDER [RT]x handlers.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Setting of VLAN filter cmd was being done with incorrect flag value.
We need to use inner vlan fields instead of outer vlan.
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixed size of fw_grp_ids in VNIC is limiting the number of Rx rings
being created. With this patch we are allocating fw_grp_ids dynamically,
allowing us to get over this artificial limit.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If HWRM resource manager is enabled, check VF resources before proceeding.
Make sure there are enough resources allocated and return an error in case
of insufficient error.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While moving a flow to a different destination queue,
the l2_filter_id being passed to the FW command was incorrect.
Fix it by re-using the matching filter's l2_filter_id since
that is supposed to be the same in this case.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rte_mbuf_data_iova returns a 64-bit address. But we are incorrectly
using only 32-bits of that. Use rte_cpu_to_le_64 instead of
rte_cpu_to_le_32
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to update bnxt_hwrm_vnic_plcmode_cfg if new MTU is
not greater than the max data the mbuf can accommodate.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_free_filter_mem(), check the filter type and call the
appropriate HWRM command to clear the filter from HW.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The L2 filter id is needed in many scenarios particularly when
we are repurposing the same ntuple filter with different destination
queues. This patch reverts a commit in which the L2 filter id was being
reset in clear_ntuple_filter().
Fixes: 1383434c90 ("net/bnxt: reset L2 filter id once filter is freed")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
When using multi-mbuf to xmit large packets, we need to use total
packet lengths (sum of all segments) to set txbd->flags_type.
Packets will not be sent when using tx_pkt->data_len(The first
segment of packets).
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Reviewed-by: Herry Chen <herry.chen@broadcom.com>
Reviewed-by: Jason He <jason.he@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
update HWRM API to v1.9.2.9
Signed-off-by: Rob Miller <rob.miller@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Passing an invalid fw_vnic_id to the firmware will cause the
bnxt_hwrm_vnic_plcmode_cfg command to fail.
Add a check for VNIC id before sending message to firmware.
Fixes: daef48efe5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In preparation of more rte_flow support it has been decided to
separate out filter and flow into their own files. Functionally the
same.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move check_zero_bytes into new bnxt_util.h file.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Packets destined to the to-be-stopped queue should not be dropped
(neither in HW nor in the driver), so re-program the RSS Table without
this queue on stop and add it back to the table on start unless it
is a Representor VF.
Since 0th entry is used for default ring, use fw_grp_id + 1 to change
the RSS table population logic by programming valid IDs instead of the
default zeroth entry in case of an invalid fw_grp_id.
Destroy and recreate the trio of Rx rings(compl, Rx, AG) every time in
start so that HW is in sync with software.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add more checks for checksum calculation offload.
Also check for tunnel frames and select the proper
buffer descriptor size.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Xiaoxin Peng <xiaoxin.peng@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Jason He <jason.he@broadcom.com>
Reviewed-by: Qingmin Liu <qingmin.liu@broadcom.com>
We are not cleaning up all the memory and also not unregistering
the driver during device close operation. This patch fixes the issue.
Fixes: 8930749513 ("net/bnxt: free memory in close operation")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) Use nb_rx_pkts instead of checking producer indices of Rx and
aggregator rings to decide if any Rx completions were processed.
2) Post Rx buffers early in Rx processing instead of waiting for
the budgeted burst quota.
3) Ring Rx CQ DB after Rx buffers are posted.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Batch more than one Tx requests such that only one completion
is generarted by the HW. We request a Tx completion for first
and last Tx request in the batch.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
PORT_CLR_STATS is not allowed for VFs, NPAR, MultiHost functions
or when SR-IOV is enabled.
Don't send the HWRM command in such cases.
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
- We don't support QinQ offload, so removing it now.
- Fix incorrect offload flags in default rxconf
Since qede PMD does not support per queue rx offload, it
should not set default_rxconf.offload flags in .dev_infos_get().
Although these offloads are enabled by default, they are per port
and not per queue.
Fixes: 946dfd18a4 ("net/qede: convert to new Rx/Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
This patch disables extended VLAN offload by default as PMD does not
support it.
Fixes: d87246a437 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch adds the values for the ixgbe PMD.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since its return type is unsigned, if_nametoindex() returns 0 in case of
error, never -1.
Fixes: ccdcba53a3 ("net/mlx5: use Netlink to add/remove MAC addresses")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
If WQE ID is used in CQE for Multi-Packet RQ, the ratio of CQE compression
drops a little bit. In order to reach to 100Gbps with 64B traffic, it is
needed to further save PCIe bandwidth by increasing the number of strides
in a WQE. It is now 64 by default but adjustable by a PMD parameter -
mprq_log_stride_num.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Multi-Packet Receive Queue is to receive multiple packets on a single large
buffer. The number of consumed strides in CQE is accumulated to keep track
of the current stride index. However, it is safer to directly use stride
index in CQE to avoid out-of-order situation which can possibly be caused
by introducing LRO in the future.
If Rx CQE compression is enabled, HW can be configured to store the stride
index in a mini-CQE but this will need newer version of library/driver.
Therefore, since this change, MPRQ is only supported with the newer
library/driver and Rx hash result is not supported if MPRQ is enabled along
with Rx CQE compression.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
If Multi-Packet RQ is enabled but not supported by device or
kernel/library, print out a warning message.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Stride index is added to mlx5_mini_cqe8 structure and WQE ID is added to
mlx5_cqe structure.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
mlx5_rx_poll_len() returns Rx hash result extracted from either mini CQE or
regular CQE. As mini CQE may not have the hash result if configured
otherwise, it shouldn't assume the first DWORD of mini CQE is always hash
result. mlx5_rx_poll_len() is changed to return pointer to the mini CQE if
compressed.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The threshold of buffer replenishment for vectorized Rx burst is a constant
value (64). If the size of Rx queue is comparatively small, device could
run out of buffers. For example, if the size of Rx queue is 128, buffers
are replenished only twice per a wraparound. This can cause jitter in
receiving packets and the jitter can cause unnecessary retransmission for
TCP connections.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Fixes: 570acdb1da ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
NFP CPP interface dinamically configures NFP CPP BARs for accessing
any NFP chip component from user space. This requires to map PCI BAR
regions specifically. However, this does not require to do such map
over the usual map done by VFIO or UIO drivers with the device PCI
BARs.
This patch avoids this remapping and therefore also avoids to access
the device sysfs resource0 file for doing that remapping.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Getting the bar size is required for NFP CPP interface configuration.
However, this information can be obtained from the VFIO or UIO driver
instead of accessing the sysfs resource file.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When the number of rx queues is 0 (what can be when application does
not receive) failed with SIGFPE.
It happens when the application is also requesting ETH_MQ_RX_RSS_FLAG
in the rte_dev->data->dev_conf.rxmode.mq_mode.
Fixed adding zero rx queues check.
Signed-off-by: Daria Kolistratova <daria.kolistratova@intel.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
This commit implements TCP segmentation offload in TAP.
librte_gso library is used to segment large TCP payloads (e.g. packets
of 64K bytes size) into smaller MTU size buffers.
By supporting TSO offload capability in software a TAP device can be used
as a failsafe sub device and be paired with another PCI device which
supports TSO capability in HW.
For more details on librte_gso implementation please refer to dpdk
documentation.
The number of newly generated TCP TSO segments is limited to 64.
Reviewed-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Prior to this commit IP/UDP/TCP checksum offload calculations
were skipped in case of a multi segments packet.
This commit enables TAP checksum calculations for multi segments
packets.
The only restriction is that the first segment must contain
headers of layers 3 (IP) and 4 (UDP or TCP)
Reviewed-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
This was added to dev_stop when set MTU requested vport restart.
We are not requiring vport restart any more with set MTU as it just
needs vport to be inactive and doesn't need the port reconfigured.
Fixes: d121a6b5f7 ("net/qede: fix VF MTU update")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
qede pmd does not have support for legacy interrupt mode.
This causes slow path completion failure with uio_pci_generic module,
since it uses legacy interrupt (INTx) mode.
Fix this issue by installing legacy interrupt handler.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
We did not register unicast mac configuration handlers
for VF causing failure in bonding of VFs.
Also, mac_addr_set operation requires mac_remove followed
by mac_add.
Fixes: 86a2265e59 ("qede: add SRIOV support")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
build error gcc version 6.3.1 20161221 (Red Hat 6.3.1-1),
with EXTRA_CFLAGS="-O3":
.../drivers/net/thunderx/nicvf_ethdev.c:907:9:
error: ‘txq’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
if (txq->pool_free == nicvf_single_pool_free_xmited_buffers)
~~~^~~~~~~~~~~
.../drivers/net/thunderx/nicvf_ethdev.c:886:20:
note: ‘txq’ was declared here
struct nicvf_txq *txq;
^~~
Same error on function 'nicvf_eth_dev_init' and 'nicvf_dev_start', it
seems 'nicvf_set_tx_function' inlined when optimization enabled.
Initialize the txq and add NULL check before using it to fix.
Fixes: 7413feee66 ("net/thunderx: add device start/stop and close")
Cc: stable@dpdk.org
Reported-by: Richard Walsh <richard.walsh@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add functions to add/remove MAC addresses
Signed-off-by: Alex Kiselev <alex@therouter.net>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Change open_rx/tx_pcap/iface functions to open only a single pcap/dumper
and not loop num_of_queue times
The num_of_queue loop is already achieved by the
caller rte_kvargs_process
Fixing:
1. Opens N requested pcaps/dumpers instead of N^2
2. Leak of pcap/dumper's which are being overwritten by
the sequential calls to open_rx/tx_pcap/iface functions
3. Use the filename/iface args per queue and not just the last one
that overwrites the previous names
Fixes: 4c173302c3 ("pcap: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Ido Goshen <ido@cgstowernetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This feature is used to create a hole between HEADROOM
and actual data.Size of hole is specified in bytes as
module param to pmd
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The generic tunnel TSO was depended in the regular one capabilities to
be enabled.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch avoids direct access to device config sysfs file using
rte_pci_read_config instead.
Apart from replicating code, it turns out this direct access does
not always work if non-root users execute DPDK apps. In those cases
it is mandatory to go through VFIO specific function for reading pci
config space.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
At this point valid data is already set by rte_eth_get_device_info.
device field becomes zero and consumer is not able to retrieve pci data.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some illegal packets will lead to TX/RX hang and
can't recover automatically. This patch check those
illegal packets and protect TX/RX from hanging.
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GL_SWR_PM_UP_THR value is not impacted from the link speed, its
value is set according to the total number of ports for a better
pipe-monitor configuration.
All bellowing relevant device IDs are considered (NICs, LOMs, Mezz
and Backplane):
Device-ID Value Comments
0x1572 0x03030303 10G SFI
0x1581 0x03030303 10G Backplane
0x1586 0x03030303 10G BaseT
0x1589 0x03030303 10G BaseT (FortPond)
0x1580 0x06060606 40G Backplane
0x1583 0x06060606 2x40G QSFP
0x1584 0x06060606 1x40G QSFP
0x1587 0x06060606 20G Backplane (HP)
0x1588 0x06060606 20G KR2 (HP)
0x158A 0x06060606 25G Backplane
0x158B 0x06060606 25G SFP28
Fixes: c9223a2bf5 ("i40e: workaround for XL710 performance")
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The summarized global register change info will be logged
no matter if there's real global register change. Since
only real changes are logged now, there's no need to
summarize global register change info, otherwise will
cause misunderstanding.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently no matter if there's global change, the global
configuration will be always logged. But there's no value
to log the info if the configuration is not changed.
This patch prints only real global changes.
Also, change log level from DEBUG to WARNING.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Cppcheck reports following error,
(error) Shifting 32-bit value by 36 bits is undefined behaviour
According to datasheet, there's PHY type and PHY type extension
in setting PHY config command, should exclude PHY type extension
when setting PHY type.
Fixes: 1bb8f66116 ("net/i40e: fix link down and negotiation")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
MAC address bits in mask registers should be set to zero
when the is mac mask is 0xFF, otherwise if it is 0x0
these bits should be to 0x3F.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tunnel type format should be translated to ixgbe required format
before register set in FDIR cloud mode, Ans also some register
not useful in cloud mode but only useful in IP mode should be set
to zero as datasheet request.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In cloud mode for FDIR, tunnel id should be set as protocol
request, the lower 8 bits should be set as reserved.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In IP mode FDIR, X550 can support not only 4 tuple parameters
but also vlan tci in protocol, so add this feature to flow parser.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are many registeres in x550 support stats of
flow director filters, for example the number of added
or removed rules and the number match or miss match packet
count for this for port, all these important information
can be read form registeres in x550 and display with command
xstats.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When detaching a port bound to ixgbe PMD, if the port
does not have any VFs, *vfinfo is not set and there is
a NULL dereference attempt, when calling
rte_eth_switch_domain_free(), which expects VFs to be used,
causing a segmentation fault.
Steps to reproduce:
./testpmd -- -i
testpmd> port stop all
testpmd> port close all
testpmd> port detach 0
Bugzilla ID: 57
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Reported-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
rte_errno should be saved only if error has occurred because rte_errno
could have garbage value.
Fixes: a6d83b6a92 ("net/mlx5: standardize on negative errno values")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Split maintainers logs from user logs.
A lot of debug logs are present providing internal information on how
the PMD works to users. Such logs should not be available for them and
thus should remain available only when the PMD is compiled in debug
mode.
This commits removes some useless debug logs, move the Maintainers ones
under DEBUG and also move dump into debug mode only.
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Write combining (WC) increases NIC performance by making better
utilization of PCI bus. ENA PMD may make usage of this feature.
To enable it load igb_uio driver with wc_activate set to 1.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The FreeBSD define was removed from platform file when HAL was upgraded
to newer version.
In file included from drivers/net/ena/ena_ethdev.c:45:
from drivers/net/ena/ena_ethdev.h:42:
from drivers/net/ena/base/ena_com.h:37:
drivers/net/ena/base/ena_plat.h:48:2: error: "Invalid platform"
Fixes: 3adcba9a89 ("net/ena: update HAL to the newer version")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The mlx5 driver had two init functions, but this could
cause log initialization to be done after the
other initialization. Also, the name of the function does
not match convention (cut/paste error?).
Fix by initializing log type first at start of the pmd_init.
This also gets rid of having two constructor functions.
Fixes: a170a30d22 ("net/mlx5: use dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This artificial limitation was inherited from the mlx4 code base and has no
purpose other than adding unnecessary noise.
This patch is a port of commit f2318196c7 ("net/mlx4: remove limitation
on number of instances").
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Temporary IB device context and list are not freed in case of a successful
initialization of the device.
This issue is caused by the two following commits, the first of which
causes initialization to return early, while the second one goes a bit
overboard while switching to negative errno values; an internal variable
(err) is needed to tell success from failure at the end of the function
since rte_errno is not reliable enough.
Fixes: f2318196c7 ("net/mlx4: remove limitation on number of instances")
Fixes: 9d14b27308 ("net/mlx4: standardize on negative errno values")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Currently when resetting bond mac address, we are getting the
persisted mac address from slave info considering primary port
as index. But we need to compare the port id from slave info
with the primary port to get the primary slave index and get
the persisted mac address. Without this fix, persisted mac addr
will be zero and rte_eth_dev_default_mac_addr_set will fail.
Fixes: a45b288ef2 ("bond: support link status polling")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar <kiran.kokkilagadda@caviumnetworks.com>
The necessary vDPA ops have already been implemented
in ifcvf driver. So just need to announce the necessary
protocol features to enable the host notifier support.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the first ETH_LINK_UP slave is added to a bonding device, it is
immediately activated. If these are polling slaves, there will be a
later link state event, when last_link_status doesn't match link_status.
But because this slave is already activated, the bonding device's link
status isn't updated.
To fix this, we always attempt to update the bonding device's link status
in the link state change callback.
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Since the kni library is an optional library, we need to add a check
here to ensure that the kni wrapper PMD is only built when the main kni
lib is being built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make the compiler switch name and document name consistent as ``ifc`` to
avoid confusion. Also rename the map file to standard name for meson
build in the process.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
TX descriptor eop_offset field is not initialized and it could
contain garbage. This patch fixes the potential problem setting
EOP as the only subfield. The other subfield, data offset, is
not used by now.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Add API to flush all the filters under specified port.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to query filter hit and byte counts from hardware.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to construct delete filter work request to remove filter
at specified index in LE-TCAM (maskfull) region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Define filter work request API used to construct filter operations
to be communicated with firmware. These requests are sent via
control queue and completions come asynchronously in firmware event
queue.
Implement flow create operation to create filters in LE-TCAM
(maskfull) region at specified index.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add control queue to communicate filter creation/deletion requests
with firmware. This API will be used by subsequent patches.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Introduce rte_flow skeleton and implement validate operation.
Parse and convert <item>, <action>, <attributes> into hardware
specification. Perform validation, including basic sanity tests
and underlying device's supported filter capability checks.
Currently add support for:
<item>: IPv4, IPv6, TCP, and UDP.
<action>: Drop, Queue, and Count.
Also add sanity checks to ensure filters are created at specified
index in LE-TCAM region. The index in LE-TCAM region indicates
the filter rule's priority with index 0 having the highest priority.
If no index is specified, filters are created at closest available
free index.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch available filter resources from firmware and allocate table for
book-keeping and managing filters in hardware. Also define the hardware
filter specification (ch_filter_specification) used to describe each
filter rule.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Apart from not being used, this is causing problem when compiling
DPDK with the musl library as reported by bugzilla.
Bugzilla ID: 40
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Link speed should is not limited to 10Gb/s and it shouldn't be hardcoded.
They link speed is set to none instead and the applications shouldn't
rely on this value when using ENA PMD.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The pointer received from rte_memzone_reserve from macro
ENA_MEM_ALLOC_COHERENT_NODE was not stored anywhere, and as a result
memory allocated by this macro could not been released.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
When use GENMASK_ULL(63,0) left shift by 64 bits is performed.
Shifting by number greater or equal then word length
is undefined operation and failed on some platforms.
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
ENA_MEM_ALLOC_NODE not need to use contiguous physical memory.
Also using memset without checking if allocation succeed can cause
segmentation fault.
To avoid both issue use rte_zmalloc_socket.
Fixes: 3d3edc265f ("net/ena: make coherent memory allocation NUMA-aware")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Need to check if memory allocation succeed before using it.
Using memset on NULL pointer cause segfault.
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
During initializing Tx queues update Non-Uniform Memory Access
configuration in NIC firmware.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Adjust error checking and cleaning to Linux driver:
* add checking if MTU is to small,
* fix error messages (mismatched Rx and Tx),
* return error received from base driver or proper error
code instead of -1,
* in case of error release occupied resources,
* in case of Rx error trigger NIC reset.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Validate Tx req id during clearing completed packets.
If id is wrong, trigger NIC reset.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move configuration of IO queue numbers to separate function and take
into consideration max number of IO completion queues.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Enable AENQ FATAL_ERROR and WARNING callbacks by setting flags
in aenq_groups. They are handled by "unimplemented handler".
If unimplemented handler is called, error is logged.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
In function ena_infos_get driver provides information about minimal
and maximal number of Rx and Tx descriptors.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Function ena_check_and_linearize_mbuf check Tx mbuf for number of
segments and linearize (defragment) it if necessary. It is called
before sending each packet.
Information about maximum number of segments is stored per each ring.
Maximum number of segments supported by NIC is taken from ENA COM in
ena_calc_queue_size function and stored in adapter structure.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Add variable wd_state to make driver functional without keep alive
AENQ handler.
The watchdog will be executed only if the aenq group has keep alive
enabled.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The admin queue can stop responding or became inactive due to unexpected
behaviour of the device. In that case, the whole device should be
restarted.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Keep alive is executing AENQ interrupt periodically. It allows to check
health of the device and trigger reset event if the device will stop
responding.
To check for the state of the device, the DPDK application must call
rte_timer_manage().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reset routine can be used by the DPDK application to reset the device in
case of receiving RTE_ETH_EVENT_INTR_RESET from the PMD.
The reset event is not triggered by the driver, yet. It will be added in
next commits to enable error recovery in case of misfunctioning of the
device.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
There is no need to check for restart all queues. It is sufficient to
check only previously initialized queues.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
When ENA notifications are provided ena_notification handler is called.
It checks if received value is not corrupted and if necessary it
reports proper warnings.
Data received from NIC is parsed in ena_update_hints. Fields for
storing those information was added to ena_adapter structure.
ENA notification are enabled by setting ENA_ADMIN_NOTIFICATION flag in
aenq_groups.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
To make the LSC interrupt working, the AENQ must be configured properly
in the ENA device. The AENQ interrupt is common for all maintenance
interrupts - the proper handler is then executed depending on the
received descriptor.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Lack of uninit routine could lead to memory leak.
Stop was added to fulfill allowed PMD operations.
Checks for the PMD states in the start and configure routine were
removed, as the upper layer is already checking for them.
The interrupt setup was moved from start to init function.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The ENA device is able to send MSI-X when it will complete an command
when polling mode is deactivated. Further, the same interrupt handler
will be used for the AENQ handling - services of the ENA device, that
allows to implement watchdog or LSC handler.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The legacy LLQ should no longer be supported by the drivers, as this API
is deprecated. Because of that, it was removed from the driver.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
ena_com is the HAL provided by the vendor and it shouldn't be modified
by the driver developers.
The PMD and platform file was adjusted for the new version of the
ena_com:
* Do not use deprecated meta descriptor fields
* Add empty AENQ handler structure with unimplemented handlers
* Add memzone allocations count to ena_ethdev.c file - it was
removed from ena_com.c file
* Add new macros used in new ena_com files
* Use error code ENA_COM_UNSUPPORTED instead of ENA_COM_PERMISSION
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Signed-off-by: Rafal Kozik <rk@semihalf.com>
The upcoming patches for the ENA PMD are part of 1.1.0 update of the PMD
and the version number is updated accordingly.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The xstats API expects that the driver fills both values and ids for
each filled entries.
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As per existing behavior, when firmware sends a link change
notification, PMD only updates the link structure but does
not notify applications about it.
This results in application sending packets even when link
status is down.
Fix this issue by issuing RTE_ETH_EVENT_INTR_LSC.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
qede_link_update() always returns -1 i.e. link not changed,
because it compares the variables which always hold same value.
Fix this function by using rte_eth_linkstatus_set().
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Multiple port reconfigurations can lead to memory allocation failures
due to hitting RTE memzone limit or no more room in config while
reserving memzone.
When freeing memzones, update the memzone mapping and the memzone count.
Release Rx and Tx queue rings allocated during queue setup.
Fixes: a39001d90d ("net/qede: fix DMA memory leak")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Kevin Traynor <ktraynor@redhat.com>
Fix fast path array index which is used for passing L2 handles to RSS
indirection table, properly distribute rxq handles for indirection table.
Currently, it is using the local copy of indirection table. When the RX
queue configuration changes the local copy becomes invalid.
Fixes: 69d7ba88f1 ("net/qede/base: use L2-handles for RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Kevin Traynor <ktraynor@redhat.com>
Avoid NULL dereference by checking pointer before using it.
Note that the fixes tag is before the driver was renamed
to mvpp2, so the patch will not apply that far back.
Fixes: 3588aaa68e ("net/mrvl: fix HIF objects allocation")
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Do not error out on invalid devarg, log the message and continue.
Decide updating the tx-switching config in check args. Add a check for
VF when disabling tx-switching
Fixes: 612ce81b20 ("net/qede: add devargs to disable NPAR Tx switching")
Fixes: f64b91b0eb ("net/qede: replace config option with run-time arg")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch fixes VF MTU update to work without having to restart the
vport and there by not requiring port re-configuration. It adds a
VF MTU Update TLV to achieve the same. Firmware can handle VF MTU update
by just pausing the vport.
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
