Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c42 ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129bc6 ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd98 ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e5c ("fm10k: update vlan offload features")
Fixes: fdba3bf15c7b ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d22b ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b092a ("nfp: add basic features")
Fixes: 56139e85abec ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081edf ("net/octeontx2: support VLAN offloads")
Fixes: d87246a43759 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In the rte_eth_rx_queue_setup API function, the local variable named
mbp_buf_size, which is the data room size of the input parameter mp,
is checked to guarantee that each memory chunk used for net device
in the mbuf is bigger than the min_rx_bufsize. But if mbp_buf_size is
less than RTE_PKTMBUF_HEADROOM, the value of the following statement
will be a large number since the mbp_buf_size is a unsigned value.
mbp_buf_size - RTE_PKTMBUF_HEADROOM
As a result, it will cause a segment fault in this situation.
This patch fixes it by modify the check condition to guarantee that the
local variable named mbp_buf_size is bigger than RTE_PKTMBUF_HEADROOM.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Function 'rte_eth_dma_zone_reserve()' returns an existing memzone based
on name match, but other requested attributes are discarded.
This may cause driver using a memzone with wrong size or alignment.
Verify size, alignment and socket_id for matched memzone, and do not use
memzone if any one of the attributes are not justified.
It is possible to free the existing memzone and allocate again with the
requested attributes but it is better caller do the explicit free.
Reported-by: Renata Saiakhova <renata.saiakhova@ekinops.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some log macros was using 'EAL' logtype, convert them to 'ethdev'.
Also fix missing EOL and fix syntax for some logs.
Fixes: 214ed1acd125 ("ethdev: add iterator to match devargs input")
Fixes: e489007a411c ("ethdev: add generic create/destroy ethdev APIs")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch defines new RSS offload types for PPPoE. Typically,
session id would be the RSS input set for a PPPoE packet, but
as a hint, each driver may have different default behaviors.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
RTE_TRACE_POINT_DEFINE and RTE_TRACE_POINT_REGISTER must come in pairs.
Merge them and let RTE_TRACE_POINT_REGISTER handle the constructor part.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Specified pattern may be translated in different manner.
For example the pattern "eth / ipv4" can be translated to match
untagged packets only, since the pattern doesn't specify a VLAN item.
It can also be translated to match both tagged and untagged packets,
for the same reason.
This patch updates the rte_flow documentation to clearly specify the
required pattern to use.
For example:
To match tagged ipv4 packets, the pattern "eth / vlan / ipv4 / end"
should be used.
To match untagged ipv4 packets, the pattern "eth / ipv4 / end"
should be used.
To match all IPV4 packets, both tagged and untagged, need to apply
two rules with the patterns above.
To match both tagged and untagged packets of any type, the pattern
"eth / end" should be used.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
There is no way to report back a link speed of 200Gbps.
Adding 200G link speed.
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch moves telemetry further down the build, and adds it as a
dependency for EAL. Telemetry V2 is now configured to build by default,
and the legacy support is built when the telemetry config flag is set.
Telemetry now has EAL flags, shown below:
"--telemetry" = Enables telemetry (this is default if no flags given)
"--no-telemetry" = Disables telemetry
When telemetry is enabled, it will attempt to open the new socket
version, and also the legacy support socket (this will depend on Jansson
external dependency and telemetry config flag, as before).
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The ethdev library now registers commands with telemetry, and
implements the callback functions. These commands allow the list of
ethdev ports and the xstats and link status for a port to be queried.
An example using ethdev commands is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 64379, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info"]}
--> /ethdev/list
{"/ethdev/list": [0, 1, 2, 3]}
--> /ethdev/link_status,0
{"/ethdev/link_status": {"status": "UP", "speed": 10000, "duplex": \
"full-duplex"}}
--> /ethdev/xstats,0
{"/ethdev/xstats": {"rx_good_packets": 0, "tx_good_packets": 0, \
<snip>
"tx_priority7_xon_to_xoff_packets": 0}}
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Invert the current trace point headers logic by making
rte_trace_point_register.h include rte_trace_point.h.
There is no more need for a RTE_TRACE_POINT_REGISTER_SELECT special macro
since including rte_trace_point_register.h itself means we want to
register trace points.
The unexplained "provider" notion is removed from the documentation and
rte_trace_point_provider.h is merged into rte_trace_point.h.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Building OVS with dpdk, sparse complains about 64-bit constant being
passed as a normal integer that can't fit it:
error: constant 0xffffffffffffffff is so big it is unsigned long
Fixes: ecbc8570131d ("ethdev: add PFCP header to flow API")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Using a global mbuf dynamic field for metadata incurs some
performance penalty on a datapath. Store this information in
the Rx queue descriptor for a better cache locality.
Fixes: a18ac6113331 ("net/mlx5: add metadata support to Rx datapath")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Defines some new RSS offload types for ETH/S_VLAN/C_VLAN/L2TPV3/
/PFCP/L2_SRC_ONLY/L2_DST_ONLY.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add the previous prototype for the 'profile_hook_rx_burst_cb' function
to fix the compiler warning when the DPDK is built with
'RTE_ETHDEV_PROFILE_WITH_VTUNE' config option enabled:
/home/dpdk/lib/librte_ethdev/ethdev_profile.c:17:1: warning:
no previous prototype for profile_hook_rx_burst_cb [-Wmissing-prototypes]
Fixes: 2c1bbab7f09d ("ethdev: change vtune profiling approach")
Cc: stable@dpdk.org
Signed-off-by: Eugeny Parshutin <eugeny.parshutin@linux.intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add tracepoints at important and mandatory APIs for tracing support.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Minor spelling errors found by aspell and codespell
Fixes: 1daa33805824 ("ethdev: validate offloads set by PMD")
Fixes: 81f9db8ecc2c ("ethdev: add vlan offload support")
Fixes: c8231c63ddcb ("ethdev: insert Rx callback as head of list")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_PFCP to flow API to
match a PFCP header.
Add sample PFCP rules for testpmd guide. Since Session Endpoint
Identifier (SEID) only will be present in PFCP Session header and PFCP
Session headers shall be identified when the S field is equal to 1, when
create rules for PFCP Session header with certain SEID the S field need
be set 1.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch adds top level SPDX license identifiers for some of the DPDK
source and scripts, where the copyright owners have not yet agreed to
replace the full BSD-3 license plate.
This patch also add SPDX license tag for a file with no
previous license plates. (DPDK is BSD-3)
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If a function is added to the eth_dev_ops struct before
tx_descriptor_status function, this will cause ABI breakage. This is due
to static inline functions using this function, and some other functions
above it in the struct, so they cannot change position. A comment is
added to inform developers of this possible breakage.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The rte_security API which enables inline protocol/crypto feature
mandates that for every security session an rte_flow is created. This
would internally translate to a rule in the hardware which would do
packet classification.
In rte_security, one SA would be one security session. And if an rte_flow
need to be created for every session, the number of SAs supported by an
inline implementation would be limited by the number of rte_flows the
PMD would be able to support.
If the fields SPI & IP addresses are allowed to be a range, then this
limitation can be overcome. Multiple flows will be able to use one rule
for SECURITY processing. In this case, the security session provided as
conf would be NULL.
Application should do an rte_flow_validate() to make sure the flow is
supported on the PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Introduce an API which dump the device's internal representation
information of rte flows in hardware.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Avoid overwriting device flags and other information in device
data stored in shared memory when a secondary process
probes PCI device.
Fixes: 494adb7f63f2 ("ethdev: add device fields from PCI layer")
Cc: stable@dpdk.org
Signed-off-by: Fang TongHao <fangtonghao@sangfor.com.cn>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is a potential problem that changing the content of
dev->data->dev_conf.rxmode.offloads even when there is no
vlan_offload_set driver callback.
It is a good idea that prevent the side effect and make the API return
success if no change requested. This patch fixes the problem, the detail
information as below:
- keep possibility to do dummy set even if there is no driver callback
- do not touch Rx mode offloads in device data before checking the
driver callback availability
- ensure that Rx mode offloads are rolled back correctly if driver
callback returns error
Fixes: 81f9db8ecc2c ("ethdev: add vlan offload support")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The maximum amount of unique swutching domain is supposed
to be equal RTE_MAX_ETHPORTS. Current implementation allows
to allocate only RTE_MAX_ETHPORTS-1 domains.
The definition of RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID is
changed from 0 to UINT16_MAX, the rte_eth_dev_info_get is
updated to initialize dev_ibfo structure accordingly.
Fixes: ce9250406323 ("ethdev: add switch domain allocator")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the new flow item RTE_FLOW_ITEM_TYPE_L2TPV3OIP to
flow API to match a L2TPv3 over IP header. This patch supports only
L2TPv3 over IP header format which is different to L2TPv2/L2TPv3
over UDP. The difference in header formats between L2TPv3 over IP
and L2TP over UDP require a separate implementation for each.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
The function was checking -1 against the callback data instead of
the given cb_arg parameter.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ricardo Roldan <rroldan@bequant.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For some overlay network, such as VXLAN, the DSCP field in the new outer
IP header after VXLAN decapsulation may need to be updated accordingly.
This commit introduce the DSCP modify action for IPv4 and IPv6.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
Missing asterisk so that comment is not seen by doxygen.
Fixes: 9a2f44c76207 ("ethdev: add flow tag")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
A buffer overflow happens in testpmd with some drivers
since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
The advertised capabilities of mlx4, mlx5 and softnic
for the number of queues were the maximum number: UINT16_MAX.
They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
that applications expect to be respected.
The limitation is applied at ethdev level (function rte_eth_dev_info_get),
in order to force the configured limit for all drivers.
Fixes: 14b53e27b30e ("ethdev: fix crash with multiprocess")
Cc: stable@dpdk.org
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When the last item in flow pattern includes "next protocol" field which
is relevant for RSS flow expansion, a new item is added to the pattern
according to the "next protocol" field. This field is called missed
field.
The missed field wrongly was not initialized what caused to some of the
flow item fields to contain garbage values.
As a result, the PMDs internal flow engine may crash.
For example, the spec value may include garbage pointer and to cause
crash.
Initialize the missed field with zeroes.
Fixes: fc2dd8dd492f ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
memcpy() source and destination areas must not overlap and equal
pointers is the case which is really met, so handle it.
Fixes: 68b931bff287 ("ethdev: eliminate interim variable")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Avoid usaged of "failed" in the message about not requested but
enabled offload, since it is not a failure.
Fixes: 1daa33805824 ("ethdev: validate offloads set by PMD")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Right now a PMD decides if it is critical that an offload cannot
be disabled (i.e. not requested, but still enabled). If PMD treaks
it as OK, we should not spam logs with corresponding messages
by default. Default log level in ethdev is INFO, so change the
message level to DEBUG.
Fixes: 1daa33805824 ("ethdev: validate offloads set by PMD")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Fix missing new line token at the end of log.
Fixes: 5d308972954c ("ethdev: add mbuf RSS update as an offload")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is a rte_flow API which expands a RSS flow pattern to multiple
patterns according to the RSS hash types in the RSS action
configuration.
As part of the expansion, detection of the last item of the flow uses
the "next proto" field of the last configured item in the pattern list.
Wrongly, the mask of this field was not considered in order to validate
the field.
Ignore "next proto" fields when their corresponded masks invalidate them.
Fixes: fc2dd8dd492f ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch implements API for configuration and
validation of max size for LRO aggregated packet.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In order to allow smooth addition of features without breaking
ABI compatibility, some space is reserved in several core structs
of ethdev API.
The struct rte_eth_dev and rte_eth_dev_data are supposed
to be used internally only, but there is a chance that
increasing their size would break ABI for some applications.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some PMDs cannot work when certain offloads are enable/disabled, as a
workaround PMDs auto enable/disable offloads internally and expose it
through dev->data->dev_conf.rxmode.offloads.
After device specific dev_configure is called compare the requested
offloads to the offloads exposed by the PMD and, if the PMD failed
to enable a given offload then log it and return -EINVAL from
rte_eth_dev_configure, else if the PMD failed to disable a given offload
log and continue with rte_eth_dev_configure.
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
