DPAA2 Hardware Mempool handlers allow enqueue/dequeue from NXP's
QBMAN hardware block.
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS is set to 'dpaa2', if the pool
is enabled.
This memory pool currently supports packet mbuf type blocks only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
The AVP devices are only supported on Intel 64-bit architectures so
adjusting the defconfig attributes accordingly.
Fixes: 908072e9d0 ("net/avp: support driver registration")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
The crypto scheduler PMD has no external dependencies to enable that by
default.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.
Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This adds the minimal changes to allow a SW eventdev implementation to
be compiled, linked and created at run time. The eventdev does nothing,
but can be created via vdev on commandline, e.g.
sudo ./x86_64-native-linuxapp-gcc/app/test --vdev=event_sw0
...
PMD: Creating eventdev sw device event_sw0, numa_node=0, sched_quanta=128
RTE>>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The skeleton driver facilitates, bootstrapping the new
eventdev driver and creates a platform to verify
the northbound eventdev common code.
The driver supports both VDEV and PCI based eventdev
devices.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch implements northbound eventdev API interface using
southbond driver interface
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adds the initial framework for registering the driver against the support
PCI device identifiers.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds a header file with log macros for the AVP PMD
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This commit introduces the AVP PMD file structure without adding any actual
driver functionality. Functional blocks will be added in later patches.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add debug options to config file. Define macros used for log and make
use of config file options to enable them.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Venkat Koppula <venkat.koppula@caviumnetworks.com>
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Signed-off-by: Mallesham Jatharakonda <mjatharakonda@oneconvergence.com>
Enable Thunderx nicvf PMD driver in the common
config as it does not have build dependency
with any external library and/or architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch enables i40e driver in PowerPC along with its altivec
intrinsic support.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add KNI PMD which wraps librte_kni for ease of use.
KNI PMD can be used as any regular PMD to send / receive packets to the
Linux networking stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Yong Wang <yongwang@vmware.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Moved from lib/librte_mempool, stack mempool handler is an independent
driver.
Shared builds would now require to link in librte_mempool_stack for
"stack" mempool handler.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Moved from lib/librte_mempool, ring mempool is now an independent
driver.
Shared builds would now need to add librte_mempool_ring for:
* ring_mp_mc
* ring_sp_sc
* ring_sp_mc
* ring_mp_sc
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There was a compile time setting to enable a ring to yield when
it entered a loop in mp or mc rings waiting for the tail pointer update.
Build time settings are not recommended for enabling/disabling features,
and since this was off by default, remove it completely. If needed, a
runtime enabled equivalent can be used.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The debug option only provided statistics to the user, most of
which could be tracked by the application itself. Remove this as a
compile time option, and feature, simplifying the code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Users compiling DPDK should not need to know or care about the arrangement
of cachelines in the rte_ring structure. Therefore just remove the build
option and set the structures to be always split. On platforms with 64B
cachelines, for improved performance use 128B rather than 64B alignment
since it stops the producer and consumer data being on adjacent cachelines.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Downstreams might want to provide different DPDK releases at the same
time to support multiple consumers of DPDK linked against older and newer
sonames.
Also due to the interdependencies that DPDK libraries can have applications
might end up with an executable space in which multiple versions of a
library are mapped by ld.so.
Think of LibA that got an ABI bump and LibB that did not get an ABI bump
but is depending on LibA.
Application
\-> LibA.old
\-> LibB.new -> LibA.new
That is a conflict which can be avoided by setting CONFIG_RTE_MAJOR_ABI.
If set CONFIG_RTE_MAJOR_ABI overwrites any LIBABIVER value.
An example might be ``CONFIG_RTE_MAJOR_ABI=16.11`` which will make all
libraries librte<?>.so.16.11 instead of librte<?>.so.<LIBABIVER>.
We need to cut arbitrary long stings after the .so now and this would work
for any ABI version in LIBABIVER:
$(Q)ln -s -f $< $(patsubst %.$(LIBABIVER),%,$@)
But using the following instead additionally allows to simplify the Make
File for the CONFIG_RTE_NEXT_ABI case.
$(Q)ln -s -f $< $(shell echo $@ | sed 's/\.so.*/.so/')
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Jan Blunck <jblunck@infradead.org>
Re-enable CONFIG_RTE_LIBRTE_SCHED, since it is needed to build
correctly.
Fix a few warnings when compiling mpipe_tilegx.c.
Remove an empty rte_cpu_feature_table[] array using a bogus type.
Properly set RTE_OBJCOPY_{TARGET,ARCH} in mk/arch/tile/rte.vars.mk.
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Remove RTE_LIBRTE_SFC_EFX_TSO config option since it is not
required any more:
- unreasonable limit on number of Tx queues when TSO is not
actually required should be solved using per-device parameter
- performance difference with and without TSO compiled in is small
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patchset introduce new application which allows measuring
performance parameters of PMDs available in crypto tree. The goal of
this application is to replace existing performance tests in app/test.
Parameters available are: throughput (--ptest throughput) and latency
(--ptest latency). User can use multiply cores to run tests on but only
one type of crypto PMD can be measured during single application
execution. Cipher parameters, type of device, type of operation and
chain mode have to be specified in the command line as application
parameters. These parameters are checked using device capabilities
structure.
Couple of new library functions in librte_cryptodev are introduced for
application use.
To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set
(it is set by default).
Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 --
--ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth
--cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo
sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12
--total-ops 10000000 --burst-sz 32 --buffer-sz 64
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Adds Makefile for scheduler cryptodev PMD, and updates existing
Makefiles. Different than other cryptodev PMDs, scheduler PMD
is required to be built as shared libraries.
Adds scheduler PMD enable and debug flags to config/common_base.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
KNI ethtool support (KNI control path) is not commonly used,
and it tends to break the build with new version of the Linux kernel.
KNI ethtool feature is disabled by default. KNI datapath is not effected
from this update.
It is possible to enable feature explicitly with config option:
"CONFIG_RTE_KNI_KMOD_ETHTOOL=y"
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch introduces crypto poll mode driver
using ARMv8 cryptographic extensions.
CPU compatibility with this driver is detected in
run-time and virtual crypto device will not be
created if CPU doesn't provide:
AES, SHA1, SHA2 and NEON.
This PMD is optimized to provide performance boost
for chained crypto operations processing,
such as encryption + HMAC generation,
decryption + HMAC validation. In particular,
cipher only or hash only operations are
not provided.
The driver currently supports AES-128-CBC
in combination with: SHA256 HMAC and SHA1 HMAC
and relies on the external armv8_crypto library:
https://github.com/caviumnetworks/armv8_crypto
Build ARMv8 crypto PMD if compiling for ARM64
and CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO option
is enable in the configuration file.
ARMV8_CRYPTO_LIB_PATH environment variable will
point to the appropriate library directory.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Elastic Flow Distributor (EFD) is a distributor library that uses
perfect hashing to determine a target/value for a given incoming flow key.
It has the following advantages:
- First, because it uses perfect hashing, it does not store
the key itself and hence lookup performance is not dependent
on the key size.
- Second, the target/value can be any arbitrary value hence
the system designer and/or operator can better optimize service rates
and inter-cluster network traffic locating.
- Third, since the storage requirement is much smaller than a hash-based
flow table (i.e. better fit for CPU cache), EFD can scale to
millions of flow keys.
Finally, with current optimized library implementation performance
is fully scalable with number of CPU cores.
Signed-off-by: Byron Marohn <byron.marohn@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
Because using a NFP PMD requires specific BSP installed, the PMD
support was not the default option before. This was just for making
people aware of such dependency, since there is no need for such a
BSP for just compiling DPDK with NFP PMD support.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Add PCI device ID for ConnectX-5 and enable multi-packet send for PF and VF
along with changing documentation and release note.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
The PMD allows for DPDK and the host to communicate using a raw
device interface on the host and in the DPDK application. The device
created is a Tap device with a L2 packet header.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Aws Ismail <aismail@ciena.com>
Tested-by: Vasily Philipov <vasilyf@mellanox.com>
Enable the PMD by default on supported configurations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added API for `rte_eth_tx_prepare`
uint16_t rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
Added fields to the `struct rte_eth_desc_lim`:
uint16_t nb_seg_max;
/**< Max number of segments per whole packet. */
uint16_t nb_mtu_seg_max;
/**< Max number of segments per one MTU */
These fields can be used to create valid packets according to the
following rules:
* For non-TSO packet, a single transmit packet may span up to
"nb_mtu_seg_max" buffers.
* For TSO packet the total number of data descriptors is "nb_seg_max",
and each segment within the TSO may span up to "nb_mtu_seg_max".
Added functions:
int
rte_validate_tx_offload(struct rte_mbuf *m)
to validate general requirements for tx offload set in mbuf of packet
such a flag completness. In current implementation this function is
called optionaly when RTE_LIBRTE_ETHDEV_DEBUG is enabled.
int rte_net_intel_cksum_prepare(struct rte_mbuf *m)
to prepare pseudo header checksum for TSO and non-TSO tcp/udp packets
before hardware tx checksum offload.
- for non-TSO tcp/udp packets full pseudo-header checksum is
counted and set.
- for TSO the IP payload length is not included.
int
rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
this function uses same logic as rte_net_intel_cksum_prepare, but
allows application to choose which offloads should be taken into
account, if full preparation is not required.
PERFORMANCE TESTS
-----------------
This feature was tested with modified csum engine from test-pmd.
The packet checksum preparation was moved from application to Tx
preparation step placed before burst.
We may expect some overhead costs caused by:
1) using additional callback before burst,
2) rescanning burst,
3) additional condition checking (packet validation),
4) worse optimization (e.g. packet data access, etc.)
We tested it using ixgbe Tx preparation implementation with some parts
disabled to have comparable information about the impact of different
parts of implementation.
IMPACT:
1) For unimplemented Tx preparation callback the performance impact is
negligible,
2) For packet condition check without checksum modifications (nb_segs,
available offloads, etc.) is 14626628/14252168 (~2.62% drop),
3) Full support in ixgbe driver (point 2 + packet checksum
initialization) is 14060924/13588094 (~3.48% drop)
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There was an option CONFIG_RTE_INSECURE_FUNCTION_WARNING (disabled by
default), which prevents from using some libc functions:
sprintf, snprintf, vsnprintf, strcpy, strncpy, strcat, strncat, sscanf,
strtok, strsep and strlen.
It's all about using them at the right place with the right precautions.
However, it is neither really possible nor a good advice to disable them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
- Fix to use bitmapped values in NVM configuration for speed capability
advertisement. This issue is specific to 25G NIC since it is capable
of 25G and 10G speeds.
- Update feature list.
Fixes: 64c239b7f8 ("net/qede: fix advertising link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch replaces name "libcrypto" to "openssl" from file directories,
symbol prefixes and sub-names connected with old name.
Renamed poll mode driver files, test files, and documentations.
It is done to better name association with library because
the cryptography operations are using Openssl library crypto API.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
