Allocated mempools were never free. it is bad practice.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr.h with single rte_color defined
in rte_meter.h.
This is simple search and replace exercise without any implementation
change.
[1] https://mails.dpdk.org/archives/dev/2019-January/123861.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Use mempool bulk get ops to alloc burst of packets and process them.
If bulk get fails fallback to rte_mbuf_raw_alloc.
Tested-by: Yingya Han <yingyax.han@intel.com>
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Move the packet prepare logic into a separate function so that it
can be reused later.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use bulk ops for allocating segments instead of having a inner loop
for every segment.
This reduces the number of calls to the mempool layer.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Testpmd txonly copies the src/dst mac address of the port being
processed to ethernet header structure on the stack for every packet.
Move it outside the loop and reuse it.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable DEV_TX_OFFLOAD_VLAN_INSERT also along with
DEV_TX_OFFLOAD_VLAN_QINQ in tx_qinq_set() as it takes
both vlan id's as arguments.
Fixes: 597f9fafe13b ("app/testpmd: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx VLAN & QinQ insert enable need not depend on
Rx VLAN offload ETH_VLAN_EXTEND_OFFLOAD. For Tx VLAN
insert enable, error check is now to see if QinQ was enabled
but only single VLAN id is set.
Fixes: 6a34f91690d0 ("app/testpmd: fix error message when setting Tx VLAN")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch added new item "vxlan-gpe" to tunnel_type to
support new VXLAN-GPE packet type, and its classification.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When removing a rte_device on a port-based request,
all the sibling ports must be marked as closed.
The iterator loop can be simplified by using the dedicated macro.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Testpmd can generate multiple flows without taking much cost and this
could be a simple traffic generator for developer's quick tests.
If "--txonly-multi-flow" is specified in the command line, IP source
address is varied to generate multiple flows.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This commit uses the MTU fields populated in rte_eth_dev_info_get()
to validate the MTU value being passed in port_mtu_set().
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a new "show/clear fwd stats all" command to display fwd and port
statistics on the fly.
To be able to do so, the (testpmd only) rte_port structure can't be used
to maintain any statistics.
Moved the stats dump parts from stop_packet_forwarding() and merge with
fwd_port_stats_display() into fwd_stats_display().
fwd engine statistics are then aggregated into a local per port array.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code review while investigating the fwd stats display code.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
fwd engine statistics are stored as unsigned int (32bits) and can wrap
quite quickly.
Example: sending 7mpps for 614s gives us 4298000000 packets =>
0x1002e4680 larger than 32bits.
testpmd reports forwarding stats as:
RX-packets: 3500381 TX-packets: 3500010 TX-dropped: 371
While the port and accumulated stats are reported as 64bits:
RX-packets: 4298467677 RX-dropped: 0 RX-total: 4298467677
TX-packets: 4298467306 TX-dropped: 371 TX-total: 4298467677
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Having the standard stats and the rx burst stats on the same line gives a
really long line and is not consistent with the rest.
Before:
iofwd engine
RX-packets: 121811360 TX-packets: 121811392 TX-dropped: 0 RX-bursts : 3806605 [100% of 32 pkts]
TX-bursts : 3806606 [100% of 32 pkts]
csum engine
RX-packets: 5467488 TX-packets: 5467520 TX-dropped: 0 RX- bad IP checksum: 0 Rx- bad L4 checksum: 0 Rx- bad outer L4 checksum: 0
RX-bursts : 170859 [100% of 32 pkts]
TX-bursts : 170860 [100% of 32 pkts]
After:
iofwd engine
RX-packets: 259770560 TX-packets: 259770592 TX-dropped: 0
RX-bursts : 8117830 [100% of 32 pkts]
TX-bursts : 8117831 [100% of 32 pkts]
csum engine
RX-packets: 7834016 TX-packets: 7834048 TX-dropped: 0 RX- bad IP checksum: 0 Rx- bad L4 checksum: 0 Rx- bad outer L4 checksum: 0
RX-bursts : 244813 [100% of 32 pkts]
TX-bursts : 244814 [100% of 32 pkts]
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
User can specify stats period(n). The statistics should be available
to user every n second. But the print_stats() function does not
force stdout to be flushed, so for instance, a user reading testpmd's
stdout through pipe will not be able to read it until the stdout
buffer is filled.
Fixes: cfea1f3048d1 ("app/testpmd: print statistics periodically")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch fixes a typo in test-pmd/cmdline.c,
succcessfully->successfully
Two C's are good enough for success...
Fixes: a09f3e4c5046 ("app/testpmd: add hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Improved MAC swap performance for ARM platform.
The improvement was achieved by using neon intrinsics
to save CPU cycles and doing swap for four packets
at a time.
The optimization had 15% - 20% throughput boost
in testpmd MAC swap mode.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Function cmd_config_tx_metadata_specific_parsed() takes input value,
applies rte_cpu_to_be_32() on it, and stores it for Tx use.
Function cmd_show_tx_metadata_parsed() displays the stored value as is.
This patch modifies function cmd_show_tx_metadata_parsed(), to apply
rte_be_to_cpu_32() on the stored value before displaying it.
Fixes: c18feafa193c ("app/testpmd: support metadata as flow rule item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Let's check the received/sent mbufs, it can help debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Prefetching packet was missing when do_macswap() was optimized.
Fixes: 62b52877adbe ("app/testpmd: batch MAC swap for performance on x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The pointer is misused and could set wrong MAC address. As a result, some
of packets can be dropped in receiver side due to MAC address mismatch.
This can be shown as performance degradation.
Bugzilla ID: 188
Fixes: 62b52877adbe ("app/testpmd: batch MAC swap for performance on x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch proposes a slightly different test-pmd quit operation: stop
all devices before starting to close any device. Basically, stop all
moving parts before beginning to remove them. The current test-pmd quit
is stopping and closing each device before moving to the next device.
If all devices in the system are independent of each other, this
difference is usually not important. In case of Soft NIC devices, any
such virtual device typically depends on one or more physical devices
being alive, as it accesses their queues, so this difference becomes
important.
Without this straightforward fix, all the Soft NIC devices need to be
manually stopped before the quit command is issued, otherwise the quit
command can sometimes crash the test-pmd application.
Fixes: d3a274ce9dee ("app/testpmd: handle SIGINT and SIGTERM")
Cc: stable@dpdk.org
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
There's very commonly that more than 4G DDR memory in NIC for HQoS,
so right now the queue threshold size of RED needs to expand to
uint64_t. For struct rte_tm_red_params, it has been fixed, but for
test-pmd TM configuration, it hasn't been fixed. This patch fixes it.
Fixes: bddc2f40b594 ("app/testpmd: add commands for shaper and wred profiles")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
There is need to add boundary for input number from commandline,
If it beyond the definition, code will return error.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Do four packets macswap in same loop iterate to squeeze more
CPU cycles.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The patch optimizes the mac swap operation by taking advantage
of SSE instructions, it only impacts x86 platform.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Move macswap workload to dedicate function, so we can further enable
platform specific optimized version.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add missing implementation for 64-bit log2 function, and extend
the unit test to test this new function. Also, remove duplicate
reimplementation of this function from testpmd and memalloc.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an rte_bsf64 function that follows the convention of existing
rte_bsf32 function. Also, add missing implementation for safe
version of rte_bsf32, and implement unit tests for all recently
added bsf varieties.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We already changed to use generic IPC in pdump since below commit:
commit 660098d61f57 ("pdump: use generic multi-process channel")
The `rte_pdump_set_socket_dir()`, the `path` parameter of
`rte_pdump_init()` and the `enum rte_pdump_socktype` have been
deprecated since then. This commit removes these deprecated
APIs and also bumps the pdump ABI.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
In function cmd_set_mplsogre_encap_parsed(), MPLS label value was
set in mplsogre_encap_conf struct without the required offset.
As a result the value was copied incorrectly into
rte_flow_item_mpls struct.
This patch sets MPLS label value in appropriate location at
mplsogre_encap_conf struct, so it is correctly copied to
rte_flow_item_mpls struct.
Fixes: 3e77031be855 ("app/testpmd: add MPLSoGRE encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
In function cmd_set_mplsoudp_encap_parsed(), MPLS label value was
set in mplsoudp_encap_conf struct without the required offset.
As a result the value was copied incorrectly into
rte_flow_item_mpls struct.
This patch sets MPLS label value in appropriate location at
mplsoudp_encap_conf struct, so it is correctly copied to
rte_flow_item_mpls struct.
Fixes: a1191d39cb57 ("app/testpmd: add MPLSoUDP encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The Bottom-of-Stack (bos) bit of MPLS indicates
whether its the last MPLS layer (1) or not (0).
Indicating that the encapsulating MPLS is the
last MPLS layer in the packet as the default
behavior is more appropriate since multiple
encapsulation actions is not supported.
Fixes: 3e77031be855 ("app/testpmd: add MPLSoGRE encapsulation")
Fixes: 3e77031be855 ("app/testpmd: add MPLSoGRE encapsulation")
Fixes: a1191d39cb57 ("app/testpmd: add MPLSoUDP encapsulation")
cc: stable@dpdk.org
Signed-off-by: Saleh Alsouqi <salehals@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Because the user's callback is invoked in eal interrupt callback, the
interrupt callback need to be finished before it can be unregistered
when detaching device. So finish callback soon and use a deferred
removal to detach device is need.
It is a workaround, once the device detaching be moved into the eal in
the future, the deferred removal could be deleted. This patch aim to
add this workaround and refine the function name and the description to
be more explicit and comment the limitation.
Fixes: 2049c5113fe8 ("app/testpmd: use hotplug failure handler")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
The patch fixes the memory allocation for the meter DSCP table.
Fixes: e63b50162aa3 ("app/testpmd: clean metering and policing commands")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This reverts the patch that enables default RSS action by setting
key=NULL and key_len=0.
In current testpmd implementation a key pointer must exist if
key_len!=0. For example, the following flow rule will cause a
segmentation fault:
flow create 0 <pattern> actions rss queues 0 1 end key_len 40 / end
Fixes: a4391f8bae85 ("app/testpmd: set default RSS key as null")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
testpmd only sets the L4 len in case of TCP packets.
some PMD's like tap rely on mbuf meta data to calculate csum
This will set the L4 len for UDP packets same as TCP
Fixes: 160c3dc9458c ("app/testpmd: introduce IP parsing functions in csum fwd engine")
CC: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is an error in function search_rx_offload(),
it will break when get unexpected return value from function
rte_eth_dev_rx_offload_name(), but rte_eth_dev_rx_offload_name()
will return some unexpected value indeed.
Fixes: c73a9071877a ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
When creating an RSS rule without specifying a key (see [1]) it is
expected that the device will use the default key.
A NULL key is used to indicate to a PMD it should use
its default key, however testpmd assigns a non-NULL dummy key
(see [2]) instead.
This does not enable testing any PMD behavior when the RSS key is not
specified. This commit fixes this limitation by setting key to NULL.
[1]
RSS rule example without specifying a key:
flow create 0 ingress <pattern> / end actions rss queues 0 1 end / end
[2]
Testpmd default key assignment:
.key= "testpmd's default RSS hash key, "
"override it for better balancing"
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set port status to stopped for newly added devices.
Fixes: 2950a769315e ("bond: testpmd support")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
