According to the comments and logging, the author just hope user to use
the core and device which are in the same numa node for optimal
performance. If not, A warning gives out.
This patch fixes the check for a device on the node 0.
Fixes: 7107e471a6 ("examples/skeleton: very simple code for packet forwarding")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
According to the comments and logging, the author just hope user to use
the core and device which are in the same numa node for optimal
performance. If not, A warning gives out.
This patch fixes the check for a device on the node 0.
Fixes: f6baccbc2b ("examples/l2fwd-cat: add sample application for PQoS CAT and CDP")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
According to the comments and logging, the author just hope user to use
the core and device which are in the same numa node for optimal
performance. If not, A warning gives out.
For example in flow_classify:
./build/flow_classify -a 0000:7d:00.1 -l 93
Here:
0000:7d:00.1 is on numa node 0.
core 93 is on numa node 3.
The two are not in same numa node, but no warning gives out in old codes
when device is on node 0.
This patch includes the node 0 in the check.
Fixes: bab16ddaf2 ("examples/flow_classify: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This fixes -Wformat warning with clang 10.0.0 on Windows.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Timer sample example assumes that the frequency of the timer is about
2Ghz to control the period of calling rte_timer_manage(). But this
assumption is easy to fail. For example. the frequency of tsc on ARM64
is much less than 2Ghz.
This patch uses the frequency of the current timer to calculate the
correct time interval to ensure consistent result on all platforms.
In addition, the rte_rdtsc() is replaced with the more recommended
rte_get_timer_cycles function in this patch.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Recent patch to support UDP encapsulation introduced problem with
handling inbound IPv6 packets with header extensions.
This patch aims to fix the issue.
Bugzilla ID: 695
Fixes: 9a1cc8f1ed ("examples/ipsec-secgw: support UDP encapsulation")
Reported-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
VM channel number should not be validated against the
host vm_power_manager coremask core indexes, as VM
cores need not to be same as host cores.
So remove this check, to allow all the vm channels
to be added successfully.
Fixes: b49c677a0d ("examples/vm_power: respect core mask")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Move pkg-config override to beginning in the Makefile to allow
use PKGCONF variable to detect the libdpdk availability.
Fixes: fda34680eb ("examples: remove legacy sections of makefiles")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The vhost library currently configures Tx offloading (PKT_TX_*) on any
packet received from a guest virtio device which asks for some offloading.
This is problematic, as Tx offloading is something that the application
must ask for: the application needs to configure devices
to support every used offloads (ip, tcp checksumming, tso..), and the
various l2/l3/l4 lengths must be set following any processing that
happened in the application itself.
On the other hand, the received packets are not marked wrt current
packet l3/l4 checksumming info.
Copy virtio rx processing to fix those offload flags with some
differences:
- accept VIRTIO_NET_HDR_GSO_ECN and VIRTIO_NET_HDR_GSO_UDP,
- ignore anything but the VIRTIO_NET_HDR_F_NEEDS_CSUM flag (to comply with
the virtio spec),
Some applications might rely on the current behavior, so it is left
untouched by default.
A new RTE_VHOST_USER_NET_COMPLIANT_OL_FLAGS flag is added to enable the
new behavior.
The vhost example has been updated for the new behavior: TSO is applied to
any packet marked LRO.
Fixes: 859b480d5a ("vhost: add guest offload setting")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We use ioat ring space for determining if ioat callbacks can enqueue a
packet to ioat device. But there is one slot can't be used in ioat
ring due to the ioat driver design, so we need to reduce one slot in
ioat ring to prevent ring size mismatch in ioat callbacks.
Fixes: 2aa47e94bf ("examples/vhost: add ioat ring space count and check")
Cc: stable@dpdk.org
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add improved error handling to rte_ioat_completed_ops(). This patch adds
new parameters to the function to enable the user to track the completion
status of each individual operation in a batch. With this addition, the
function can help the user to determine firstly, how many operations may
have failed or been skipped and then secondly, which specific operations
did not complete successfully.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The commit a8f8b672d5 ("examples/l3fwd: skip Tx queue drain on first iteration")
implemented a change to the EM and LPM lookup methods to
prevent the Tx queue drain running in the first iteration of their
packet processing loops.
This patch applies the same change into the new FIB lookup method.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The new_mtu was assigned twice, the first assignment could be removed.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.
This patch add rte_eal_cleanup to examples to encourage new users of
DPDK to use it.
Fixes: aec9c13c52 ("eal: add function to release internal resources")
Fixes: 3d0fad56b7 ("examples/fips_validation: add crypto FIPS application")
Fixes: c8e6ceeceb ("examples/ioat: add new sample app for ioat driver")
Fixes: 4ff457986f ("examples/l2fwd-event: add default poll mode routines")
Fixes: 08bd1a1744 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Fixes: c5eebf85ba ("examples/ntb: add example for NTB")
Fixes: b77f660028 ("examples/pipeline: add new example application")
Fixes: edbed86d1c ("examples/vdpa: introduce a new sample for vDPA")
Fixes: c19beb3f38 ("examples/vhost_blk: introduce vhost storage sample")
Fixes: f5188211c7 ("examples/vhost_crypto: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
This patch supports set ctrl worker thread name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports set helloworld thread name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
As with the lib and drivers directories, we can use "continue" keyword to
reduce the indentation level of the majority of the foreach block. At the
same time, we can also replace tab indentation with spaces.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Each table entry is made up of match fields and action data, with the
latter made up of the action ID and the action arguments. The approach
of having the user specify explicitly the endianness of the action
arguments is difficult to be picked up by P4 compilers, as the P4
compiler is generally unaware about this aspect.
This commit introduces the auto-detection of the endianness of the
action arguments by examining the endianness of the their destination:
network byte order (NBO) when they get copied to headers and host byte
order (HBO) when they get copied to packet meta-data or mailboxes.
The endianness specification of each action argument as part of the
rule specification, e.g. H(...) and N(...) is removed from the rule
file and auto-detected based on their destination. The DMA instruction
scope is made internal, so mov instructions need to be used. The
pattern of transferring complete headers from table entry action args
to headers is detected, and the associated set of mov instructions
plus header validate is internally detected and replaced with the
internal-only DMA instruction to preserve performance.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch implements the Forwarding Information Base (FIB) library
in l3fwd using the function calls and infrastructure introduced in
the previous patch.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The purpose of this commit is to add the necessary function calls
and supporting infrastructure to allow the Forwarding Information Base
(FIB) library to be integrated into the l3fwd sample app.
Instead of adding an individual flag for FIB, a new flag '--lookup' has
been added that allows the user to select their desired lookup method.
The flags '-E' and '-L' have been retained for backwards compatibility.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
To prevent code duplication from the addition of lookup methods
the routes specified in lpm should be moved to a common header.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Any IP within the 2001:200::/48 subnet will match all the routes given
instead of 1 individual route and the application cannot
differentiate between them.
The change in this patch allows the ports to be individually matched using
smaller /64 ranges for each port. These smaller subnet ranges are still
within the 2001:200::/48 subnet range set aside for benchmarking
in RFC5180.
l3fwd will now use 2001:200:0:{0-7}::/64 where 0-7 is the port ID for IPv6.
Fixes: 37afe381bd ("examples/l3fwd: use reserved IP addresses")
Cc: stable@dpdk.org
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Initialize prev_tsc to cur_tsc. This avoids running the TX queue drain
in the first iteration of the packet processing loop.
Signed-off-by: Kathleen Capella <kathleen.capella@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This patch deletes the comments which are wrong and unnecessary.
Fixes: ab129e9065 ("examples/ptpclient: add minimal PTP client")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for table statistics for the SWX pipeline. For each table,
we maintain a counter for lookup hit packets, one for lookup miss
packets and one packet counter for each table action.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Enabled the TX instruction to accept an immediate value for the output
port argument. The drop instruction is simply an alias to the TX
instruction for the last output port of the pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In the example application the key can be provided by the user or
generated randomly by the example application.
Then a validation is done in order to check if the key size is
supported in the algorithm capabilities.
A new feature flag is added in crypto PMDs to allow wrapped keys,
hence, to allow wrapped keys, app should remove the validation of
key size in the application and rely on a PMD key size validation.
The validation is removed in case the key is provided by user and
the RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY feature flag is set, and
kept in case the key should be generated by the application or
RTE_CRYPTODEV_FF_CIPHER_WRAPPED_KEY is not set.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Adding lookaside IPsec UDP encapsulation support
for NAT traversal.
Application has to add udp-encap option to sa config file
to enable UDP encapsulation on the SA.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There were some padding left when a packet gets decrypted. This
patch removes those padding.
This patch also removes the padding left after verifying auth of
the packet.
Fixes: e2cdfbd07c ("examples/l2fwd-crypto: fix port id type")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The devices which are masked by cryptodev mask should not be initialized
and skipped while traversing the device list.
Fixes: 6ae3fb9df6 ("examples/l2fwd-crypto: fix session mempool size")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
L2fwd-crypto is passing 24b private data size while packet
pool creation. This patch aligns that private data size
to cache line size for better performance results.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Users of <rte_ip.h> relied on it to provide IP-related defines,
like IPPROTO_* constants, but still had to include POSIX headers
for inet_pton() and other standard IP-related facilities.
Extend <rte_ip.h> so that it is a single header to gain access
to IP-related facilities on any OS. Use it to replace POSIX includes
in components enabled on Windows. Move missing constants from Windows
networking shim to OS shim header and include it where needed.
Remove Windows networking shim that is no longer needed.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
In current design, legacy parser rte_devargs_parse() saved scratch
buffer to devargs.args while new parser rte_devargs_layers_parse() saved
to devargs.data. Code using devargs had to know the difference and
cleaned up memory accordingly - error prone.
This patch unifies scratch buffer to data field, introduces
rte_devargs_reset() function to wrap the memory clean up logic.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: Gaetan Rivet <grive@u256.net>
Short option "s" was passed to getopt_long function, while there was
no condition on this option.
Fixes: f5188211c7 ("examples/vhost_crypto: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes unchecked return value for rte_vhost_get_mem_table(),
which is reported by coverity.
Coverity issue: 364233
Fixes: ca059fa5e2 ("examples/vhost: demonstrate the new generic APIs")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Avoid calling rte_vhost_get_vhost_ring_inflight() and
rte_vhost_get_vring_base_from_inflight() when
VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD is not set.
Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Meter arrays are stateful objects that are updated by the data plane
and configured & monitored by the control plane. The meters implement
the RFC 2698 Two Rate Three Color Marker (trTCM) algorithm.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Register arrays are stateful objects that can be read & modified by
both the data plane and the control plane, as opposed to tables, which
are read-only for data plane. One key use-case is the implementation
of stats counters.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch allows specification of integer arguments for the
CLI commands in hexadecimal and octal as well as decimal.
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
A global ethernet port configuration is assigned to local variable
because in this way the local variable may be updated as required. But
this local variable is not used as input of rte_eth_dev_configure() in
original implementation, and cause that fast mbuf free feature cannot
be enabled on port.
This patch use this local variable as input of rte_eth_dev_configure().
Fixes: 6833f919f5 ("examples/packet_ordering: convert to new ethdev offloads API")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Add the file descriptor input/output port type for the SWX pipeline.
File descriptor port type provides interface with the kernel network
stack. Example file descriptor port is TAP device.
Signed-off-by: Venkata Suresh Kumar P <venkata.suresh.kumar.p@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the widlcard match/ACL table type for the SWX pipeline, which is
used under the hood by the table instruction.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Improve the table entry parsing: better code structure, enable parsing
for the key field masks, allow comments and empty lines in the table
entry files.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Venkata Suresh Kumar P <venkata.suresh.kumar.p@intel.com>
Signed-off-by: Churchill Khangar <churchill.khangar@intel.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum. This is to improve readability and consistency in
all examples.
Bugzilla ID: 238
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
