Implement rte_hash_lookup_with_hash_bulk_data() and
rte_hash_lookup_with_hash_bulk() - bulk lookup
functions with precomputed hash signatures.
Add these two functions into performance tests.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
When users configure rxds and txds by used port config cmd based
on testpmd application, it will not be able to configure rxd and
txd according to the max capability range supported by the actual
NIC hardware. Due testpmd defects, it can only configure a fixed
range to 0 to 2048.
The final result is that an incorrect printing prompt appears and
cannot be applied using rxd && txd according to the actual
capabilities supported by the device.
In order to solve the above problems, we modify the testpmd. First
by calling the rte_eth_dev_info_get api to obtain the max and min
rx/tx capability supported by the hns3, and then use this range
to compare with the actual value by users configured and make
reasonable limitation.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used
to configure these rss input set by cmdline.
Example flow commands was:
testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
actions rss types l2tpv3 end key_len 0 queues end / end
port config commands was:
testpmd>port config all rss l2tpv3
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Parse RSS offload types ESP and AH add printf for rss_hf
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
The command line to create RTE flow for specific proto_id of PPPOES can
not work.
It was:
testpmd> flow create 0 ingress pattern proto_id
proto_id [TOKEN]: match PPPoE session protocol identifier
testpmd> flow create 0 ingress pattern proto_id proto_id
proto_id [TOKEN]: match PPPoE session protocol identifier
testpmd> flow create 0 ingress pattern proto_id proto_id proto_id
proto_id [TOKEN]: match PPPoE session protocol identifier
The proto_id can not be set with previous implementation.
This patch is to fix this issue, and change the command line to:
testpmd> flow create 0 pattern pppoe_proto_id is xxxx
Fixes: 226c6e60c35b ("ethdev: add PPPoE to flow API")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Introduce new command to dump memory statistics of each socket,
summary, also show changes since last call.
Usage:
dump_socket_mem
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds CLI option to enter the v_pt_rsv_flags value for GTP
flow pattern item.
It also adds GTP as valid item in raw_encap and raw_decap setting.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
rte_eth_dev_fw_version_get() was not called in test PMD.
Added rte_eth_dev_fw_version_get() in testpmd under
"show port info <port no>"
Bugzilla ID: 225
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Muhammad Ahmad <muhammad.ahmad@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This test case shall be used to measure the trace overhead.
Example command to run the performance test case.
echo "trace_perf_autotest" | ./build/app/test/dpdk-test -c 0x3 --trace=.*
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Example commands to run UT and check the traces with babeltrace viewer.
- Delete the existing /root/dpdk-traces/ directory if needed.
> sudo rm -rf /root/dpdk-traces/
- Start the dpdk-test
> sudo ./build/app/test/dpdk-test -c 0x3 - --trace=.*
- Run trace_autotest
> trace_autotest
- View the traces with babletrace viewer.
> sudo babeltrace /root/dpdk-traces/
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add test cases for RCU defer queue APIs.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove PMD bitmask, which selects the PMD to be tested
for each test case. Instead, all PMDs are eligible
to run all tests, and capability checking discards
the PMDs which do not support each test case.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Before running any out-of-place test cases,
check if device supports this mode.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Before running any sessionless test cases,
check if device supports this mode.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that capabilities are checked to see if an algorithm
is supported by a device, there is no need to check
for a specific version of a library used in a PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Check if test case is supported by the crypto device,
including algorithm and some of its parameter, such as key length,
IV length, etc, using the capabilities API.
If it is not supported, test case is skipped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reviewed-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add in the "info_get" function to the driver, to allow us to query the
device.
No capability are available yet.
Linking bbdev-test to support the PMD with null capability.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds new tests for verification of the "internal
QAT IM buffer too small" case handling. These unit tests aren't
specific to the QAT PMD only - they pass or skip on other PMDs like
ISAL and ZLIB (depending on particular PMD capabilities).
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch introduces set of unit tests of librte_security API functions.
Tests are added to dpdk-test application and can be run with
"security_autotest" runtime command.
This is the first patch in the series of patches as adding all test cases
for all API functions in a single patch would make it unreadable.
This patch defines structure of the file and necessary test framework
initialization. It also contains first subset of unit tests for
rte_security_session_create API function.
Structure of the tests file is following:
- macros for making tests more readable;
- mockup structures and functions for rte_security_ops;
- test suite and test cases setup and teardown functions;
- tests functions;
- declaration of testcases.
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Remove RTE_TEST_TRACE_FAILURE macro definition from app/test/test.h
as it might be already defined and cause build problems.
Also it is good to leave the decision of additional logs to the final
user of test.h and rte_test.h
Fixes: 5afc521eac6a ("eal: add test assert macros")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds ability to run unit tests in cpu crypto mode
for AESNI MB cryptodev.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
An incorrect flag check was done, using "&&" instead of "&".
Fixes: 2717246ecd7d ("cryptodev: replace mbuf scatter gather flag")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Realloc did not have bad parameter autotest. Add them.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Due to the fact that the rte_realloc() test depends on the layout of
underlying memory, it can sometimes fail due to fragmentation of the
memory. To address this, make it so that the realloc autotests are run
using a newly created external memory heap instead of main memory.
Bugzilla ID: 424
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Extend test_ring_autotest with new test-cases for RTS/HTS sync modes.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce new test case to test MT peek API.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce new test case to test HTS ring mode under contention.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce new test case to test RTS ring mode under contention.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
To make these preparations two main things are done:
- Change from *single* to *sync_type* to allow different
synchronisation schemes to be applied.
Mark *single* as deprecated in comments.
Add new functions to allow user to query ring sync types.
Replace direct access to *single* with appropriate function call.
- Move actual rte_ring and related structures definitions into a
separate file: <rte_ring_core.h>. It allows to refer contents
of <rte_ring_elem.h> from <rte_ring.h> without introducing a
circular dependency.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Introduce stress test for ring enqueue/dequeue operations.
Performs the following pattern on each slave worker:
dequeue/read-write data from the dequeued objects/enqueue.
Serves as both functional and performance test of ring
enqueue/dequeue operations under high contention
(for both over committed and non-over committed scenarios).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a macro __rte_always_inline, forcing functions to be inlined,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Currently, in the case to use bitmap as resource allocator, after
bitmap creation, all the bitmap bits should be set to indicate the
bit available. Every time when allocate one bit, search for the set
bits and clear it to make it in use.
Add a new rte_bitmap_init_with_all_set() function to have a quick
fill up the bitmap bits.
Comparing with the case create the bitmap as empty and set the bitmap
one by one, the new function costs less cycles.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Meson is detecting the path /proc/sys/vm/nr_hugepages in the call to cat
in app/test/meson.build and then adding it as a build dependency.
This causes build loop if the timestamp of this file keeps changing.
It is fixed by hiding hugepage check in a shell script.
Fixes: 77784ef0fba8 ("test: allow no-huge mode for fast-tests")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
