Support enabling/disabling VF broadcast mode from PF.
User can call the API on PF to enable/disable a specific
VF's broadcast mode.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support inserting VF VLAN id from PF.
User can call the API on PF to insert a VLAN id to a
specific VF.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add a function to configure vlan strip enable/disable for specific
SRIOV VF device.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
If PF sets vf->mac_addr, in VF initialization hw->mac.addr will be set
to that same value. It is possible to check if PF set a MAC address or
not through the hw->mac.addr variable.
hw->mac.addr set by i40e_vf_parse_hw_config(), call stack is:
In PF side
i40e_pf_host_process_cmd_get_vf_resources()
eth_addr_copy(vf->mac_addr, vf_res->vsi_res[0].default_mac_address)
In VF sise
i40evf_init_vf()
i40evf_get_vf_resources()
i40e_vf_parse_hw_config()
memcpy(hw->mac.addr, vsi_res->default_mac_addr)
Updated code is after i40evf_get_vf_resources() and can benefit from
hw->mac.addr variable.
Fixes: 89e6b86384 ("i40evf: rework MAC address validation")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support changing VF default MAC address.
This function is not supported if PF set the MAC
address for the PF.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support setting VF MAC address from PF.
User can call the API on PF to set a specific
VF's MAC address.
PF should set MAC address before VF initialized,
if PF sets the MAC address after VF initialized,
new MAC address won't be effective until VF
reinitialized.
This will remove all existing MAC filters.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add missing step during VF reset: PF should
set I40E_VFGEN_RSTAT to ACTIVE at end of the
VF reset operation or VF driver may not able
to detect that reset is already completed.
This patch also remove the unnecessary enum
for vfr state.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF multicast promiscuous mode from
PF.
User can call the API on PF to enable/disable a specific
VF's multicast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF unicast promiscuous mode from
PF.
User can call the API on PF to enable/disable a specific
VF's unicast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling TX loopback from PF.
User can call the API on PF to enable/disable TX loopback
for all the PF and VFs.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF VLAN anti-spoofing from
PF.
User can call the API on PF to enable/disable a specific
VF's VLAN anti-spoofing.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF MAC anti-spoofing from
PF.
User can call the API on PF to enable/disable a specific
VF's MAC anti-spoofing.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The callback asks the user application if it is allowed to
perform the mailbox messages.
If the return value from user is RTE_PMD_I40E_MB_EVENT_PROCEED
then continue. If ACK or NACK, do nothing and send
not_supported to VF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add an API to expose the ability, that PF can notify VF
when link status changes, to APP.
So if PF APP doesn't want to enable interruption but check
link status by itself, PF APP can let VF know link status
changed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Mellanox PMDs do not differentiate IP header with or without options, so
the advertised packet type for an IPv4 should not be RTE_PTYPE_L3_IPV4,
which explicitly means "does not contain any header option".
Change the driver to set
RTE_PTYPE(_INNER)_L3_IPV4_EXT_UNKNOWN or
RTE_PTYPE(_INNER)_L3_IPV6_EXT_UNKNOWN flags for all IPv4/IPv6 packets
received.
Fixes: 429df3803a ("mlx4: replace some offload flags with packet type")
Fixes: 67fa62bc67 ("mlx5: support checksum offload")
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Retrieving link status information through the link update callback should
be quick and non-blocking.
Mellanox PMDs retrieve this information through ioctl() calls on the
related kernel netdevice. This appears to take a long time to
complete and may cause significant slowdowns in applications.
While these system calls cannot be accelerated, removing the lock on the
private structure allows applications to perform other control operations
from separate threads in the meantime. This function remains safe without
locking as it does not write the private structure, it is only used to
retrieve the name of the netdevice.
Signed-off-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
AF_PACKET has some flags to check on the receive side for 802.1Q
information. If present, we copy into the mbuf. For transmit, we
insert any 802.1Q information into the packet before copying to the ring.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add promiscuous support to the AF_PACKET PMD. The underlying Linux
device's IF_PROMISC flag is toggled to enable or disable.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The underlying Linux device's MTU is changed subject to the frame size
limitations during device creation.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This will be used by later changes to determine the underlying Linux
interface.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
clang reports this error message:
error: this function declaration is not a prototype
[-Werror,-Wstrict-prototypes]
Fixes: 5cdd769a26 ("qede: add L2 support")
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
clang reports the following error:
error: logical not is only applied to the left hand side of this bitwise
operator. [-Werror,-Wlogical-not-parentheses]
Fixes: 92c8a63223 ("cxgbe: add device configuration and Rx support")
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds a function to flush all the filter list
filter on a port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to destroy the flow filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to create the flow directory filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a flow director rule, and get the flow director info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a L2 tunnel rule, and get the L2 tunnel info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a TCP SYN rule, and get the SYN info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a ethertype rule, and get the ethertype info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add rule validate function and check if the rule is a n-tuple rule,
and get the n-tuple info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for flush all the filters in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for store and restore L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing flow director filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring TCP SYN filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring ether type filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring n-tuple filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing flow director filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing TCP SYN filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Fix typo when checking that no VLAN offload flags are passed at port
initialization.
By the way, also fix a typo in the log.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Set the MDIO (Management Data Input/Output Interface) read/write
function pointers for Marvell PHYs on some X550 platforms to use
the clause 22 functions. Marvell PHYs do not support clause 45.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add initial support for Marvell 1000BASE-T PHYs on some X550 platforms.
Firmware owns the link config for Marvell PHYs on these platforms,
software should not touch it.
Also these platforms are not capable of speeds lower than 1Gb.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Ensure that the advertised link speeds are configured for KR/KX
backplane on some new platform.
Without this patch the link remains at 1G when resuming from low power
after being downshifted by LPLU (Low Power Link Up).
This patch ensures that the advertised speeds are not changed for
2.5G configurations.
Signed-off-by: Wei Dai <wei.dai@intel.com>
