If user has specified a flag to unmap the area right after mapping it,
we were passing an already-unmapped pointer to RTE_LOG. This is not an
issue since RTE_LOG doesn't actually dereference the pointer, but fix
it anyway by moving call to RTE_LOG to before unmap.
Coverity issue: 272584
Fixes: b7cc54187e ("mem: move virtual area function in common directory")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Coverity reports these lines as having no effect. Technically, we do
want for those lines to have no effect, however they would've likely
been optimized out. Add volatile qualifiers to ensure the code has
effects.
Coverity issue: 272608
Fixes: 582bed1e1d ("mem: support mapping hugepages at runtime")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Previously, if mmap failed to map page address at requested
address, we were attempting to unmap the wrong address. Fix it
by unmapping our actual mapped address, and jump further to
avoid unmapping memory that is not allocated.
Coverity issue: 272602
Fixes: 582bed1e1d ("mem: support mapping hugepages at runtime")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Previous code had an old rebase leftover from the time when
oldpolicy was an actual int, instead of a pointer. Fix it to
do comparison with dereferencing the pointer.
Coverity issue: 272589
Fixes: 582bed1e1d ("mem: support mapping hugepages at runtime")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Normally, tailq entry should have a valid fd by the time we attempt
to map the segment. However, in case it doesn't, we're leaking fd,
so fix it.
Coverity issue: 272570
Fixes: 2a04139f66 ("eal: add single file segments option")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We close fd if we managed to find it in the list of allocated
segment lists (which should always be the case under normal
conditions), but if we didn't, the fd was leaking. Close it if
we couldn't find it in the segment list. This is not an issue
as if the segment is zero length, we're getting rid of it
anyway, so there's no harm in not storing the fd anywhere.
Coverity issue: 272568
Fixes: 2a04139f66 ("eal: add single file segments option")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
We were closing descriptor before checking if mapping has
failed, but if it did, we did a second close afterwards. Fix
it by moving closing descriptor to after we've done all error
checks.
Coverity issue: 272560
Fixes: 2a04139f66 ("eal: add single file segments option")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
resize_hugefile() returns either 0 (which indicates success) or -1
(which indicates failure). We failed to check the success as we
use --single-file-segments option.
Fixes: 2a04139f66 ("eal: add single file segments option")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Below commit introduced pthread barrier for synchronization.
But two IPC threads block on the barrier, and never wake up.
(gdb) bt
#0 futex_wait (private=0, expected=0, futex_word=0x7fffffffcff4)
at ../sysdeps/unix/sysv/linux/futex-internal.h:61
#1 futex_wait_simple (private=0, expected=0, futex_word=0x7fffffffcff4)
at ../sysdeps/nptl/futex-internal.h:135
#2 __pthread_barrier_wait (barrier=0x7fffffffcff0) at pthread_barrier_wait.c:184
#3 rte_thread_init (arg=0x7fffffffcfe0)
at ../dpdk/lib/librte_eal/common/eal_common_thread.c:160
#4 start_thread (arg=0x7ffff6ecf700) at pthread_create.c:333
#5 clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
Through analysis, we find the barrier defined on the stack could be the
root cause. This patch will change to use heap memory as the barrier.
Fixes: d651ee4919 ("eal: set affinity for control threads")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With Hotplugging memory support, the order of memseg has been changed
from physically contiguous to virtual contiguous. DPAA bus and drivers
depend on PA to VA address conversion for I/O.
This patch creates a list of blocks requested to be pinned to the
DPAA mempool. For searching physical addresses, it is expected that
it would belong to this list (from hardware pool) and hence it is
less expensive than memseg walks. Though, there is a marginal drop
in performance vis-a-vis the legacy mode with physically contiguous
memsegs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
With Hotplugging memory support, the order of memseg has been changed
from physically contiguous to virtual contiguous. FSLMC bus and dpaa2
drivers depend on PA to VA address conversion when in Physical
addressing mode.
This patch creates a list of blocks requested to be pinned to the
DPAA2 mempool. For searching physical addresses, it is expected that
it would belong to this list (from hardware pool) and hence it is
less expensive than memseg walks. Though, this has marginal impact on
performance vis-a-vis legacy mode with physically contiguous memsegs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Crypto requires physical to virtual address conversion for
descriptors. Prior to memory hotplugging this was based on memseg
iteration assuming memsegs are all physical contiguous and using
cached start address fast calculations can be done. This
assumption now stands invalid with memory hotplugging support.
In preparation for supporting hotplugging change to memory,
this patchset removes the optimized pool context stored physical
address offset based PA-VA conversion.
This adversely affects the performance as complete memsegs now need
to be parsed, but a rework containing necessary optimization would be
posted over this.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch is to accommodate an experimental feature of mbuf - external
buffer attachment. If mbuf is attached to an external buffer, its ol_flags
will have EXT_ATTACHED_MBUF set. Without enabling/using the feature,
everything remains same.
If PMD delivers Rx packets with non-direct mbuf, ol_flags should not be
overwritten. For mlx5 PMD, if Multi-Packet RQ is enabled, Rx packets could
be carried with externally attached mbufs.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch introduces a new way of attaching an external buffer to a mbuf.
Attaching an external buffer is quite similar to mbuf indirection in
replacing buffer addresses and length of a mbuf, but a few differences:
- When an indirect mbuf is attached, refcnt of the direct mbuf would be
2 as long as the direct mbuf itself isn't freed after the attachment.
In such cases, the buffer area of a direct mbuf must be read-only. But
external buffer has its own refcnt and it starts from 1. Unless
multiple mbufs are attached to a mbuf having an external buffer, the
external buffer is writable.
- There's no need to allocate buffer from a mempool. Any buffer can be
attached with appropriate free callback.
- Smaller metadata is required to maintain shared data such as refcnt.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch fix final condition check while moving virtqueue
descriptors.
Fixes: 3bb595ecd6 ("vhost/crypto: add request handler")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the missing head descriptor correction for
indirect descriptors.
Fixes: 0aee242841 ("vhost/crypto: move to safe GPA translation API")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We should call set_features callback after setting features in virtio_net
structure, otherwise vDPA driver cannot get the right features.
Fixes: 07718b4f87 ("vhost: adapt library for selective datapath")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This reverts commit 394313fff3.
While the patch did solve concurrency issue, it induces more
pages copies as some clean pages are marked as dirty for
performance reasons. Moreover, as there is no more contention
doing the logging, the rate of packets than can be processed is
higher, leading to even more pages to be dirtied.
It has been reported that with more than one queue pair, and
with a relatively low packet rate (1Mpps), the live migration
never converges until the flow is stopped.
While a better solution is found, it is better to reset to the
old behaviour, i.e. using atomic operation for dirty pages
logging.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
New version of the packages with dependencies for the szedata2
driver is needed due to the new API of the libsze2 library which
is used in the driver.
The documentation and the release notes are updated to contain
the information about the required versions.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Acked-by: Jan Remes <remes@netcope.com>
Missing "return -ENOTSUP" will always lead to illegal offload
passing through offload checking.
Fixes: 7497d3e2f7 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
JUMBO_FRAME offload capability should be exposed since i40e
does support it
Fixes: c3ac7c5b0b ("net/i40e: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Use dynamic log type (instead of PMD) in vhost.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Convert null device to use dynamic logging.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Convert this driver to use dynamic log level support.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use new logging macro to convert all calls to RTE_LOG() into
new dynamic log type.
Also fix whitespace.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Prepare function that parse flow rule actions to support not
fate-deciding actions.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The mark value for MATCH_ACTION_MARK has a maximum value.
Requesting a value larger than the maximum will cause the
filter insertion to fail with EINVAL. This patch allows the
driver to check the value at the filter validation.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds support for DPDK rte_flow "MARK" and "FLAG" filter
actions to filters on EF10 family NICs.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Filter actions MARK and FLAG are supported on Medford2 by DPDK
firmware variant.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Equal stride super-buffer Rx mode allows to mark packets in HW
using filters. Process the data on datapath and advertise
corresponding features to allow flow API support to implement it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add device argument to customize Rx descriptor wait timeout which
is supported in DPDK firmware variant only in equal stride super-buffer
Rx mode only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
DPDK firmware variant supports equal stride super-buffer Rx mode which
provides higher packet rate and packet marks but requires dedicated
mempool manager with contiguous object block allocation (e.g. bucket).
Also the firmware supports subvariant without checksumming on Tx which
allows to reach higher packet rates on transmit if checksumming is not
required.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Equal stride super-buffer requires mempool with contiguous object
block allocation mechanism. Bucket mempool is the only which provides it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The callback is a dummy yet since no Rx datapath provides its own
callback, so all pools are supported.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
HW Rx descriptor represents many contiguous packet buffers which
follow each other. Number of buffers, stride and maximum DMA
length are setup-time configurable per Rx queue based on provided
mempool. The mempool must support contiguous block allocation and
get info API to retrieve number of objects in the block.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The new argument will be used by the equal stride super-buffer
Rx datapath.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
One HW Rx descriptor has many packet buffers in the case of equal
stride super-buffer Rx modes. Each packet buffer is still treated
as separate SW Rx descriptor. rxq_entries is the size of HW Rx ring
whereas nb_rx_desc is the number of SW Rx descriptors.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Equal stride super-buffer Rx datapath does not support tunnels, code to
parse tunnel packet types and inner checksum offload is not required and
it is important to be able to compile it out on build time to avoid
extra CPU load.
Cutting of tunnels support relies on compiler optimizaitons to
be able to drop extra checks and branches if tun_ptype is always 0.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
