There is a missing depenency for building docs with "make doc-guides-pdf".
This causes it to break with "make[3]: latexmk: Command not found". This
was observed and reported in https://bugs.dpdk.org/show_bug.cgi?id=182
This patch fixes this issue by adding the latexmk package dependency in
sub-section 4.3.1 of the contributing guide ("Dependencies").
Bugzilla ID: 182
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
ENAv2 hardware provides Low Latency Queue v2 (LLQv2). It needs kernel
PCI driver to support write combining (WC). This patch add information
how to use it with igb_uio and vfio-pci drivers.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
1. Fix the lldp stop condition check - for firmware
versions 6.01(for X710)/3.33(for X722) or later we need stop the lldp
2. deferred stats reset in dev_init to avoid some noise be counted.
3. Document known issue for tx bytes decreasing due to link status change
Fixes: 044846f071cc ("net/i40e: stop LLDP before setting local LLDP MIB")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable the APIs for unicast and multicast promiscuous
mode setting.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add limitation that AAD buffer must be padded with zeroes
in GCM case.
Fixes: d4f44265a1d7 ("doc: add limitation of AAD size to QAT guide")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
With the addition of the patchset to allow auto-detection and use
of the intel_pstate kernel driver instead of the acpi-cpufreq kernel
driver, we need to reflect this in the documentation.
Now, instead of telling the user to disable intel_pstate in all cases,
it is now an optional step, should the user want to use acpi-cpufreq.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
In the References section in the Power Management overview,
both links pointed to the same l3fwd-power app. Fix the links
so that one points to l3fwd-power, and the other points to
the vm_power_manager sample app.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Update recommended BIOS settings for performance to be more appropriate
for a wider variety of applications, and allow users to select the most
appropriate settings for their use case, e.g. some users may wish to
have Turbo Boost enabled.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
No need to keep those file listings, they are very likely to become
outdated.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Update the Linux user guide to restrict the supported kernels
to reasonnably recent enough versions.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds a missing topology "loop" mode for port-topology
option in testpmd guide. The testpmd "loop" option
(PORT_TOPOLOGY_LOOP) was added to testpmd parameter
port-topology back in 2014, but it seems that it was never added
to the testpmd guide. This patch adds it in the testpmd guide.
Fixes: 3e2006d6186c ("app/testpmd: add loopback topology")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch fixes an error in ifc NIC document; a previous patch
changed the semantics to use CONFIG_RTE_LIBRTE_IFC_PMD
instead of CONFIG_RTE_LIBRTE_IFCVF_VDPA_PMD,
but the ifc NIC doc file remained with the old name.
Fixes: 4b614e9504a1 ("net/ifc: make driver name consistent")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rx packet padding is supposed to be set by an environment variable -
MLX5_PMD_ENABLE_PADDING, but it has been missing for some time by mistake.
Rather than using such a variable, a PMD parameter (rxq_pkt_pad_en) is
added instead.
Fixes: a1366b1a2be3 ("net/mlx5: add reference counter on DPDK Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Erez Ferber <erezf@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch adds GRO limitations in the programmer guide.
Fixes: 2c900d09055e ("doc: add GRO guide")
Cc: stable@dpdk.org
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes a typo in programmer's guide. It should be Frequency,
not Fequence.
Fixes: 450f0791312c ("power: add traffic pattern aware power control")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rename options CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS and
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS to a single option
CONFIG_RTE_IBVERBS_LINK_DLOPEN.
Rename meson option enable_driver_mlx_glue to ibverbs_link.
There was no good reason for setting a different link option
for mlx4 and mlx5. Having a single common option makes it
easier to understand and unify make and meson systems.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch fixes a typo in SET_MAC_DST action description.
It also adds restriction note for set MAC src/dst actions description.
Fixes: 15dbcdaada77 ("ethdev: add generic MAC address rewrite actions")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
There is no parameter called "eth-peer-configfile" in testpmd.
It should be "eth-peers-configfile". See the usage() method in
app/test-pmd/parameters.c.
Fixes: a67857e97ba8 ("doc: clarify usage of testpmd MAC forward mode")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Previous patch removed the VLAN item from example code.
This patch fixes the code and documentation accordingly.
Code update includes fix of comments, and removal of redundant
variables and their initialization.
Documentation update reflects the code changes done in previous
patch and in this patch.
Fixes: 9af4eb565710 ("examples/flow_filtering: remove VLAN item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
AVX512 was disabled for GCC because of Bugzilla issue 97 [1],
the GCC defect submitted for the issue [2] highlighted that this is
a known binutils version 2.30 issue.
Narrowed the scope of no-avx512 to the this specific binutils version.
[1]
https://bugs.dpdk.org/show_bug.cgi?id=97
[2]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88096
Fixes: 8d07c82b239f ("mk: disable gcc AVX512F support")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
RTE_MBUF_INDIRECT() is replaced with RTE_MBUF_CLONED() and removed.
This macro was deprecated in release 18.05 when EXT_ATTACHED_MBUF was
introduced.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In some cases it is useful to allow user to specify destination
ether address for outgoing packets.
This patch adds such ability by introducing new 'neigh' config
file option.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Right now ipsec-secgw always enables TX offloads
(DEV_TX_OFFLOAD_MULTI_SEGS, DEV_TX_OFFLOAD_SECURITY),
even when they are not requested by the config.
That causes many PMD to choose full-featured TX function,
which in many cases is much slower then one without offloads.
That patch adds ability for the user to disable unneeded HW offloads.
If DEV_TX_OFFLOAD_IPV4_CKSUM is disabled by user, then
SW version of ip cksum calculation is used.
That allows to use vector TX function, when inline-ipsec is not
requested.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add 'uint64_t opaque_data' inside struct rte_security_session.
That allows upper layer to easily associate some user defined
data with the session.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a opaque data field to cryptodev symmetric session.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a refcnt field to every session private data in the
cryptodev symmetric session. The counter is used to prevent freeing
symmetric session blindly before it is not cleared by every type of
crypto device in use.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a user_data_sz field to cryptodev symmetric session.
The field is used to check if reading or writing the session's user
data field is eligible.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the rte_cryptodev_sym_session structure for
cryptodev library. The updates include a changed session private
data array and an added nb_drivers field. They are used to
calculate the correct session header size and ensure safe access
of the session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds a new API "rte_cryptodev_sym_session_pool_create()" to
cryptodev library. All applications are required to use this API to
create sym session mempool as it adds private data and nb_drivers
information to the mempool private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes the cryptodev queue pair configure structure
to enable two mempool passed into cryptodev PMD simutaneously.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the plain SHA1, SHA224, SHA256, SHA384, and SHA512
algorithms support to AESNI-MB PMD. The cryptodev unit test and
documentation are updated accordingly.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch enables compression on DH895x HW series
and updates supported hardware accelerator devices list.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds the AES-GMAC authentication only support to AESNI-MB
PMD, including the driver code, cryptodev unit test, and documentation
updates.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Damian Nowak <damianx.nowak@intel.com>
This patch updates the AESNI-MB PMD document with the new intel-ipsec-mb
version number, the release note with new library version support, and
the deprecation notice for removing some library version support in
19.05 release.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the incorrect intel multi buffer library support
version and missed limitation of GCM algorithm support.
Fixes: 0e9f8507afcb ("crypto/aesni_mb: support AES-GCM algorithm")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds checksum support in the ISA-L PMD for both compression
and decompression.
CRC32 is supported as well as Adler32.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Function iter_mempool is used for iterating slected mempool elements
and display the contents of elements for a max of 256 bytes. In case
of invalid or no name for mempool, no information is displayed.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_mempool is used for displaying valid MEMPOOL.
In case of invalid or no name, whole list is dump.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_ring is used for displaying information of RING instance
of the primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_crypto is used for displaying the crypto PMD under primary
process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_tm is used for displaying the tm PMD under the primary
process. This covers basic and per node|level details with statistics.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_port is used for displaying the port PMD information under
primary process. The information shows basic, per queue and security.
Also helper MACRO 'MAX_STRING_LEN, STATS_BDR_FMT and STATS_BDR_STR' and
meson build file is updated for new functionality.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit includes the add of:
- ConnectX-6 device ID
- ConnectX-6 SRIOV device ID
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
