Due to a mistake operation from me, older version (v10) was merged to
master branch. It's the v11 should be applied. However, the master branch
is not rebase-able. Thus, this patch is made, from the diff between v10
and v11.
The diffs are:
- Add check for parameter and tailroom in rte_net_make_rarp_packet
- Allocate mbuf in rte_net_make_rarp_packet
Besides that, a link error is fixed when shared lib is enabled.
Fixes: 45ae05df82 ("net: add a helper for making RARP packet")
Fixes: c3ffdba0e8 ("vhost: use API to make RARP packet")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Yuanhan Liu <yliu@fridaylinux.org>
Suggested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The ESP header is required for IPsec crypto actions.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
APIs for selecting the architecure specific implementation and computing
the crc (16-bit and 32-bit CRCs) are added. For CRCs calculation, scalar
as well as x86 intrinsic(sse4.2) versions are implemented.
The scalar version is based on generic Look-Up Table(LUT) algorithm,
while x86 intrinsic version uses carry-less multiplication for
fast CRC computation.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add the Gre header structure in librte_net. It will be used by next
patches that adds the support of Gre tunnels in the software packet type
parser.
The extended headers (checksum, key or sequence number) are not defined.
Signed-off-by: Jean Dao <jean.dao@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce the function rte_net_get_ptype() that parses a mbuf and
returns its packet type. For now, the following packet types are parsed:
L2: Ether
L3: IPv4, IPv6
L4: TCP, UDP, SCTP
The goal here is to provide a reference implementation for packet type
parsing. This function will be used by testpmd in next commits, allowing
to compare its result with the value given by the hardware.
This function will also be useful when implementing Rx offload support
in virtio pmd. Indeed, the virtio protocol gives the csum start and
offset, but it does not give the L4 protocol nor it tells if the
checksum is relevant for inner or outer. This information has to be
known to properly set the ol_flags in mbuf.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Jean Dao <jean.dao@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Previously, librte_net only contained header files. Add a C file
(empty for now) and generate a library. It will contain network helpers
like checksum calculation, software packet type parser, ...
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The proper place for rte_ether.h is in librte_net because it defines
network headers.
Moving it will also prevent to have circular references in the following
patches that will require the Ethernet header definition in rte_mbuf.c.
By the way, fix minor checkpatch issues.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new specific packet processing engine in the "testpmd" application that
only replies to ARP requests and to ICMP echo requests.
For this purpose, a new "icmpecho" forwarding mode is provided that can be
dynamically selected with the following testpmd command:
set fwd icmpecho
before starting the receipt of packets on the selected ports.
Then, the "icmpecho" engine performs the following actions on all received
packets:
- replies to a received ARP request by sending back on the RX port a ARP
reply with a "sender hardware address" field containing the MAC address
of the RX port,
- replies to a ICMP echo request by sending back on the RX port a ICMP echo
reply, swapping the IP source and the IP destination address in the IP
header,
- otherwise, simply drops the received packet.
When replying to a received packet that was encapsulated into a VLAN tunnel,
the reply is sent back with the same VLAN identifier.
By default, the testpmd configures VLAN header stripping RX option on each
port.
This option is not managed by the icmpecho engine which won't detect
packets that were encapsulated into a VLAN.
To address this issue, the VLAN header stripping option must be previously
switched off with the following testpmd command:
vlan set strip off
When the "verbose" mode has been set with the testpmd command
"set verbose 1", the "icmpecho" engine displays informations about each
received packet.
The "icmpecho" forwarding engine can also be used to simply check port
connectivity at the hardware level (check that cables are well-plugged)
and at the software level (receipt of VLAN packets, for instance).
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
