GCC 11 complains that 'a' is uninitialized.
../dpdk/app/test/test_prefetch.c: In function 'test_prefetch':
../dpdk/app/test/test_prefetch.c:25:9:
error: 'a' may be used uninitialized [-Werror=maybe-uninitialized]
25 | rte_prefetch0(&a);
| ^~~~~~~~~~~~~~~~~
Fix by initializing 'a'.
Bugzilla ID: 714
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@nvidia.com>
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fix the allocation for sessions, to prevent an array-bounds
warning with GCC 11. Set the not created session to NULL.
Fixes: 202d375c60 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This file has redundant BSD license text that is already
replaced by the use of SPDX license id.
Having both is unnecessary and potentially confusing.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The return value for a test when the required PMD is not loaded should
be TEST_SKIPPED, rather than TEST_FAILED.
Fixes: 8bfdd8a7f0 ("test/crypto: refactor to use sub test suites")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Variable i is used as a denominator which may be zero, and
this may result in segmentation fault.
This patch fixed it.
Fixes: 948bc3d6d0 ("test: add reciprocal based division")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Build error:
../app/test/test_table_tables.c: In function ‘test_table_stub’:
../app/test/test_table_tables.c:31:9:
warning: ‘memset’ offset [0, 31] is out of the bounds [0, 0]
[-Warray-bounds]
memset((uint8_t *)mbuf + sizeof(struct rte_mbuf) + 32, 0, 32); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../app/test/test_table_tables.c:151:25:
note: in expansion of macro ‘PREPARE_PACKET’
151 | PREPARE_PACKET(mbufs[i], 0xadadadad);
| ^~~~~~~~~~~~~~
'key' points to mbuf header + 32 bytes, and memset clears next 32 bytes
of 'key', so overall there needs to be 64 bytes after mbuf header.
Adding a mbuf size check before memset.
The original code has an assumption that mbuf data buffer follows mbuf
header, this patch accepts same assumption.
Bugzilla ID: 677
Fixes: 5205954791 ("app/test: packet framework unit tests")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
when turbo is enabled or disabled, the frequency is set to a low non-turbo
frequency, so we need to set to the frequency expected by the test before
checking.
Fixes: aeaeaf5f2d ("test/power: add cases for turbo feature")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
With the intel_pstate driver and turbo enabled, indexing is slightly
different to normal, so to get the test to work properly, enable
turbo at the start.
Fixes: ed7c51a6a6 ("app/test: vm power management")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
With the intel_pstate driver and turbo enabled, the top frequency in
the frequency array is the P1+1, i.e. 2300001, whereas the frequency
shown in scaling_cur_freq could be a lot higher.
This patch adds a flag to the check_cur_freq function so that we can
specify if a frequency is greater than expected (turbo mode), in which
case the check should be successful.
Fixes: aeaeaf5f2d ("test/power: add cases for turbo feature")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Different drivers present the current cpu core frequency in different
sysfs files. Some present it in cpuinfo_cur_freq, some in scaling_cur_freq,
and some actually present it in both.
This patch attempts to open one, if that fails, tries the other.
Fixes: d550a8cc31 ("app/test: enhance power manager unit tests")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
'cls->cls' will be NULL if flow classifier create has failed,
then segmentation fault will occur if the variable is used.
This patch fixed it.
Fixes: 9c9befea4f ("test: add flow classify unit tests")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Return value of a function 'rte_zmalloc' is dereferenced without
checking, and it may call segmentation fault.
This patch fixed it.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In the existing implementation, the blockcipher test cases are being run
and reported as one test case per type, even though multiple test cases
are hidden in each. For example, "test_AES_chain_all" runs 46 test cases.
Each blockcipher type should have a testsuite instead.
The blockcipher testsuite is dynamically built, depending on the
blockcipher type chosen. The testcase struct is modified to allow
running a testcase with data, which is used for data required when
running each blockcipher testcase.
The blockcipher testsuites are added dynamically to parent testsuites
as sub-testsuites where needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
The blockcipher testcase return value TEST_SUCCESS was incorrect for
one conditional check, it should have been TEST_SKIPPED similar to the
other condition checks in this function when the testcase is skipped.
Fixes: 4868f6591c ("test/crypto: add cases for raw datapath API")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
The testsuite params struct and ut functions are now in the cryptodev
test header file. This will allow them be used outside of the
cryptodev_test.c file. They will be used in a subsequent patch by the
blockcipher test.
As a result of this change, slight renaming changes were necessary
for ipsec and asym tests, to avoid a clash in names.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Testcases were previously using -ENOTSUP and TEST_SKIPPED return
statuses interchangeably. Both resulted in the testcase not being run.
These return statuses are now standardised to TEST_SKIPPED.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
The existing implementation runs a giant cryptodev testsuite for most
autotests, which in turns runs one setup function regardless of device.
This is now broken down into multiple testsuites,
that are used as sub-testsuites. Each autotest runs a general crypto
parent test suite, to which the sub-testsuites are added.
For example, the AESNI_MB test runs "Cryptodev Unit Test Suite",
which has a setup function only to configure testsuite params.
Creation of vdevs in the setup function is no longer supported,
it is expected the user does this when running the app.
This autotest previously just ran the cryptodev_testsuite,
but now has the smaller sub-testsuites added to the parent suite instead.
The same test cases are being run as before.
The scheduler autotest creates its own parent testsuite with nested
sub-testsuites, rather than using the cryptodev testsuite mentioned above.
This is due to it being more complex in execution,
by requiring setting different modes before running tests.
The scheduler autotest no longer requires the extra test cases to
attach/set mode/detach when running the blockcipher test cases for
each mode. The attach/set mode/detach functionality is now tested in a
sub-testsuite. When running the sub-testsuites for each mode,
the attach/set mode/detach happens in the setup and teardown functions
for that sub-testsuite.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
The current structure for unit testing only allows for running a
test suite with nested test cases. This means all test cases for an
autotest must be in one suite, which is not ideal.
For example, in some cases we may want to run multiple lists of test
cases that each require different setup, so should be in separate suites.
The unit test suite struct is modified to hold a pointer to a list of
sub-testsuite pointers, along with the list of testcases as before.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Some small changes were made to the unit test suite runner for
readability and to enable reuse of some of the function in a later patch.
On test suite setup skip/fail, the loop to count testcases as
skipped/failed has been moved to another function.
This will allow for recursion in a later patch when nested sub-testsuites
are used.
The unit test suite runner accessed the list of testcases in the suite
structure every time the testcase was used. This is now replaced by a
testcase variable which improves readability.
A macro has been introduced for readability, instead of using open
coded loops.
Rather than keep local variable status counts for testcases,
these are added to the test suite structure.
The summary output now prints the suite name, this will be useful later
when multiple nested sub-testsuites are being run.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Currently action RTE_FLOW_ACTION_TYPE_METER_COLOR is defined.
Add the CLI for this action: color type (types)
There are three types: green, yellow and red.
Example for the new policy meter CLIs:
add port meter policy 0 1 g_actions color type green / end y_actions
color type yellow / end r_actions color type red / end
In the above command, the action type is
RTE_FLOW_ACTION_TYPE_METER_COLOR, the meter policy action list:
green -> green, yellow -> yellow, red -> red.
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tunnel offload model requires application to obtain PMD related flow
items or actions to construct a flow rule. These elements acquire
internal PMD flow resources that must be explicitly released.
The patch destroys tunnel offload PMD resources after flow creation
failure.
Fixes: 1b9f274623 ("app/testpmd: add commands for tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Test case setup should return -ENOTSUP, if it is not supported.
Fixes: 7d761b07fc ("test/event: add unit tests for periodic timer")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The last lcore declared in the list is also a valid lcore in the list.
Fixes: 32d7dbf269 ("app/eventdev: fix overflow in lcore list parsing")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Segmentation fault may occur without checking if memzone
reserves succeed or not.
Fixes: 50247fe03f ("test/timer: exercise new APIs in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Copy over the offset data required for auth in out-of-place op
when auth offset and cipher offset are not aligned.
Fixes: e847fc5128 ("test/crypto: add encrypted digest case for AES-CTR-CMAC")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
For out-of-place operations, comparing expected ciphertext with
the operation result should skip cipher_offset bytes, as those
will not be copied from source to the destination buffer, making
the tests fail.
Fixes: 02ed7b3871 ("test/crypto: add SNOW3G test cases for auth-cipher")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The logging should show context by printing the two variables which
compared to each other. 'nb_harq_inputs', not 'nb_hard_outputs';
'nb_harq_outputs', not 'nb_hard_outputs'.
This patch corrected misused variable.
Fixes: d819c08327 ("app/bbdev: update for 5GNR")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Return value of a function 'rte_malloc' is dereferenced without
checking, and may result in segmentation fault.
This patch fixed it.
Fixes: 31a7853d1e ("baseband/turbo_sw: support large size code block")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
While working on RISC-V port I have encountered a situation where worker
threads get stuck in the rte_distributor_return_pkt() function in the
burst test.
Investigation showed some of the threads enter this function with
flag RTE_DISTRIB_GET_BUF set in the d->retptr64[0]. At the same time the
main thread has already passed rte_distributor_process() so nobody will
clear this flag and hence workers can't return.
What I've noticed is that adding a flush just after the last _process(),
similarly to how quit_workers() function is written in the
test_distributor.c fixes the issue.
Lukasz Wojciechowski reproduced the same issue on x86 using a VM with 32
emulated CPU cores to force some lcores not to be woken up.
Fixes: 7c3287a105 ("test/distributor: add performance test for burst mode")
Cc: stable@dpdk.org
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Because a single worker can process more than one packet from the
distributor, the final set of notifications in burst mode should be
sent one-by-one to ensure that each worker has a chance to wake up.
This fix mirrors the change done in the functional test by
commit f72bff0ec2 ("test/distributor: fix quitting workers in burst
mode").
Fixes: c3eabff124 ("distributor: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Counter action query was implemented as part of flow query, but was not
implemented as part of indirect action query.
This patch adds the required implementation.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The port_action_handle_query function supports query operation for
indirect RSS action.
No driver currently supports this operation, and this support is
unnecessary.
Remove it.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The fwd_config_setup() is called after init_fwd_streams().
The fwd_config_setup() will reinitialize forwarding streams.
This patch removes init_fwd_streams() from init_config().
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch adds fwd_config_setup() at the end of cmd_config_dcb_parsed()
to update "cur_fwd_config", so that the actual forwarding streams can be
queried by the "show config fwd" cmd.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Currently, the check for doing DCB test is assigned to
start_packet_forwarding(), which will be called when
run "start" cmd. But fwd_config_setup() is used in many
scenarios, such as, "port config all rxq".
This patch moves the check from start_packet_forwarding()
to fwd_config_setup().
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Currently, '.get_dcb_info' must be supported for the port doing DCB
test, or all information in 'rte_eth_dcb_info' are zero. It should be
prevented when user run cmd "port config 0 dcb vt off 4 pfc off".
This patch adds the check for support of reporting dcb info.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
After DCB mode is configured, if we decrease the number of RX and TX
queues, fwd_config_setup() will be called to setup the DCB forwarding
configuration. And forwarding streams are updated based on new queue
numbers in fwd_config_setup(), but the mapping between the TC and
queues obtained by rte_eth_dev_get_dcb_info() is still old queue
numbers (old queue numbers are greater than new queue numbers).
In this case, the segment fault happens. So rte_eth_dev_configure()
should be called again to update the mapping between the TC and
queues before rte_eth_dev_get_dcb_info().
Like:
set nbcore 4
port stop all
port config 0 dcb vt off 4 pfc on
port start all
port stop all
port config all rxq 8
port config all txq 8
Fixes: 900550de04 ("app/testpmd: add dcb support")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
After DCB mode is configured, the operations of port stop and port start
change the value of the global variable "dcb_test", As a result, the
forwarding configuration from DCB to RSS mode, namely,
“dcb_fwd_config_setup()” to "rss_fwd_config_setup()".
Currently, the 'dcb_flag' field in struct 'rte_port' indicates whether
the port is configured with DCB. And it is sufficient to have
'dcb_config' as a global variable to control the DCB test status. So
this patch deletes the "dcb_test".
In addition, setting 'dcb_config' at the end of init_port_dcb_config()
in case that ports fail to enter DCB mode.
Fixes: 900550de04 ("app/testpmd: add dcb support")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
For the DCB forwarding test, each core is assigned to each traffic class.
Number of forwarding cores for DCB test must be equal or less than number
of total TC. Otherwise, the following problems may occur:
1/ Redundant polling threads will be created when forwarding cores number
is greater than total TC number.
2/ Two cores would try to use a same queue on a port when Rx/Tx queue
number is greater than the used TC number, which is not allowed.
Fixes: 900550de04 ("app/testpmd: add dcb support")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Variable total, which may be zero and result in segmentation fault.
This patch fixed it.
Fixes: 9b1249d9ff ("app/testpmd: support dumping socket memory")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The --txpkts command line parameter was silently ignored due to
application was unable to check the Tx queue ring sizes for non
configured ports.
The "set txpkts <len0[,len1]*>" was also rejected if there
was some stopped or /unconfigured port.
This provides the following:
- If fails to get ring size from the port, this can be because port is
not initialized yet, ignore the check and just be sure segment size
won't cause an out of bound access. The port descriptor check will
be done during Tx setup.
- The capability to send single packet is supposed to be very basic
and always supported, the setting segment number to 1 is always
allowed, no check performed
- At the moment of Tx queue setup the descriptor number is checked
against configured segment number
Bugzilla ID: 584
Fixes: 8dae835d88 ("app/testpmd: remove restriction on Tx segments set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
When txq offload is configured, max rxq is used as the max queue. This
patch fixes it.
Fixes: 74453ac9ef ("app/testpmd: fix queue offload configuration")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Return value 'rte_kni_init' of a function is not checked. If
it fails, error handling (logging and return) should be done.
This patch fixed it.
Fixes: 0c6bc8ef70 ("kni: memzone pool for alloc and release")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch changed 'subsytem' to 'subsystem'.
Fixes: 0c6bc8ef70 ("kni: memzone pool for alloc and release")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tainted and unvalidated integer 'idx' used as an index, which may
lead to buffer overflow.
This patch fixed it.
Fixes: 89e5eb1180 ("app/testeventdev: add string parsing helpers")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The function rte_pktmbuf_init() expects that the mempool private area is
large enough and was previously initialized by rte_pktmbuf_pool_init(),
which is not the case.
This causes the function rte_pktmbuf_priv_size() to return an
unpredictable value, and this value is used as a size in a memset.
Replace the mempool object initializer by my_obj_init(), which does not
have this constraint, and fits the needs for this test.
Fixes: 923ceaeac1 ("test/mempool: add unit test cases")
Cc: stable@dpdk.org
Reported-by: Wenwu Ma <wenwux.ma@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since commit 7911ba0473 ("stack: enable lock-free implementation for
aarch64"), lock-free stack is supported on arm64 but this description was
missing from the doxygen for the flag.
Currently it is impossible to detect programmatically whether lock-free
implementation of rte_stack is supported. One could check whether the
header guard for lock-free stubs is defined (_RTE_STACK_LF_STUBS_H_) but
that's an unstable implementation detail. Because of that currently all
lock-free ring creations silently succeed (as long as the stack header
is 16B long) which later leads to push and pop operations being NOPs.
The observable effect is that stack_lf_autotest fails on platforms not
supporting the lock-free. Instead it should just skip the lock-free test
altogether.
This commit adds a new errno value (ENOTSUP) that may be returned by
rte_stack_create() to indicate that a given combination of flags is not
supported on a current platform.
This is detected by checking a compile-time flag in the include logic in
rte_stack_lf.h which may be used by applications to check the lock-free
support at compile time.
Use the added RTE_STACK_LF_SUPPORTED flag to disable the lock-free stack
tests at the compile time.
Perf test doesn't fail because rte_ring_create() succeeds, however
marking this test as skipped gives a better indication of what actually
was tested.
Fixes: 7911ba0473 ("stack: enable lock-free implementation for aarch64")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch supports display queue state in "show rxq/txq" commands.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
