This patch fixes the issue that failed to create an RSS rule with type
L2-payload.
Fixes: feaae285b3 ("net/i40e: support hash configuration in RSS flow")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
This patch fixes the issue that the flow which both source MAC mask
and destination MAC mask are all zeros can not be created.
Fixes: ea0c22fd82 ("net/i40e: enable MAC address as flow director input set")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
When we flush FDIR filter, we can not call i40e_fdir_teardown()
function as it will free vsi used for FDIR, then the vsi->base_queue
will be freed from pf->qp_pool, but vsi->base_queue can only get
once when do dev init in i40e_pf_setup(). If we free it, it will
never be alloc again.
Bugzilla ID: 404
Fixes: 2e67a7fbf3 ("net/i40e: config flow director automatically")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently, flow "pattern eth type is 0x0806 / end actions mark id
0x86 / rss / end" can't be created successfully. FDIR parser
shouldn't deny RTE_ETHER_TYPE_ARP since ARP packets will be
parsed as PCTYPE_L2_PAYLOAD. This patch fixes the issue.
Bugzilla ID: 402
Fixes: 42044b69c6 ("net/i40e: support input set selection for FDIR")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The AltiVec header file breaks boolean type. [1] [2]
Currently the workaround was located only in mlx5 device.
Adding the trace module caused this issue to appear again, due to
order of includes, it keeps overriding the local fix.
This patch solves this issue by resetting the bool type, immediately
after it is being changed.
[1] https://mails.dpdk.org/archives/dev/2018-August/110281.html
[2]
In file included from
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool_trace_fp.h:18:0,
from
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool.h:54,
from
dpdk/drivers/common/mlx5/mlx5_common_mr.c:7:
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point.h: In
function '__rte_trace_point_fp_is_enabled':
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point.h:226:2:
error: incompatible types when returning type 'int' but '__vector __bool
int' was expected
return false;
^
In file included from
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point.h:281:0,
from
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool_trace_fp.h:18,
from
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool.h:54,
from
dpdk/drivers/common/mlx5/mlx5_common_mr.c:7:
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool_trace_fp.h:
In function 'rte_mempool_trace_ops_dequeue_bulk':
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point_provider.h:104:6:
error: wrong type argument to unary exclamation mark
if (!__rte_trace_point_fp_is_enabled()) \
^
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point.h:49:2:
note: in expansion of macro '__rte_trace_point_emit_header_fp'
__rte_trace_point_emit_header_##_mode(&__##_tp); \
^
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point.h:99:2:
note: in expansion of macro '__RTE_TRACE_POINT'
__RTE_TRACE_POINT(fp, tp, args, __VA_ARGS__)
^
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool_trace_fp.h:20:1:
note: in expansion of macro 'RTE_TRACE_POINT_FP'
RTE_TRACE_POINT_FP(
^
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool_trace_fp.h:
In function 'rte_mempool_trace_ops_dequeue_contig_blocks':
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point_provider.h:104:6:
error: wrong type argument to unary exclamation mark
if (!__rte_trace_point_fp_is_enabled()) \
^
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point.h:49:2:
note: in expansion of macro '__rte_trace_point_emit_header_fp'
__rte_trace_point_emit_header_##_mode(&__##_tp); \
^
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point.h:99:2:
note: in expansion of macro '__RTE_TRACE_POINT'
__RTE_TRACE_POINT(fp, tp, args, __VA_ARGS__)
^
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool_trace_fp.h:29:1:
note: in expansion of macro 'RTE_TRACE_POINT_FP'
RTE_TRACE_POINT_FP(
^
dpdk/ppc_64-power8-linux-gcc/include/rte_mempool_trace_fp.h:
In function 'rte_mempool_trace_ops_enqueue_bulk':
dpdk/ppc_64-power8-linux-gcc/include/rte_trace_point_provider.h:104:6:
error: wrong type argument to unary exclamation mark
if (!__rte_trace_point_fp_is_enabled()) \
Fixes: 725f5dd0bf ("net/mlx5: fix build on PPC64")
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The meson build file does not enable i40e vectorization support for
PPC/altivec systems, even though the existing Makefile does enable the
support. Add the required architecture check and sources line.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add ESP patterns to i40e_flow_parse_rss_pattern().
Update i40e PMD user guide with download link for esp-ah.pkg file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Restrict pointer aliasing to optimize the code generated.
The patch showed ~3% performance uplift on Arm N1SDP platform, and no
degradation on ThunderX2. The tet case is RFC2544 zero-loss L2
forwarding running testpmd.
[1] https://gcc.gnu.org/onlinedocs/gcc-4.8.5/gcc/Restricted-Pointers.html
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
To keep ordering of mixed accesses, 'DMB OSH' is sufficient.
'DSB' inside the I40E_PCI_REG_WRITE is overkill.[1]
This patch fixes by replacing with just sufficient barriers in the
normal PMD and vPMD.
It showed 7% performance uplift on ThunderX2 and 4% on Arm N1SDP.
The test case is the RFC2544 zero-loss test running testpmd.
[1] http://inbox.dpdk.org/dev/CALBAE1M-ezVWCjqCZDBw+MMDEC4O9qf0Kpn89EMdGDajepKoZQ@mail.gmail.com
Fixes: ae0eb310f2 ("net/i40e: implement vector PMD for ARM")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Update base code release version in readme.
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce constants for handling PTP pins used for external
clock source.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This change is adding new device ID and handling it in the same way as
X710-T*L head of family. A new device ID is for new V710-T*L adapter
supporting speeds up to 5G.
Signed-off-by: Zalfresso-Jundzillo <marekx.zalfresso-jundzillo@intel.com>
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
update X722/X710 FW API version to 1.10.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Enable source MAC address and destination MAC address as FDIR's
input set for ipv4-other, ipv4-udp and ipv4-tcp. When OVS-DPDK is
working as a pure L2 switch, enable MAC address as FDIR input set
with Mark+RSS action would help the performance speed up. And FVL
FDIR supports to change input set with MAC address.
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Due to the restriction of the flag I40E_FLAG_VF_MAC_BY_PF,
VF cannot program the MAC address.
In order to solve this inflexibility, the use of I40E_FLAG_VF_MAC_BY_PF
has been deleted in the code implementation to ensure that
VF can flexibly program the MAC address.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The new macro __rte_cold, for compiler hinting,
is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Stopping LLDP is necessary for DPDK, but it will cause DCB init failure.
For kernel shared code, the prerequisite for successful initialization
of DCB is that LLDP is enabled. This patch starts LLDP before DCB init
and stops it when init finishes.
Fixes: a8e84b22bd ("net/i40e/base: support persistent LLDP")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Lack of GL_SWR_PM_UP_THR value for mac type 4x10G X722 caused it can't
reach line rate in one queue one core forwarding case. It's about 1%
performance drop. This patch adds value as:
Device-ID Value Comments
0x37D0 0x03030303 4x10G FPK
This value is hardware specific.
Fixes: 3320d4a240 ("net/i40e: workaround performance degradation")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
If configuring VF promiscuous mode is not supported, return '-ENOTSUP'
error code in '.promiscuous_enable/disable' dev_ops.
This is to fix the port start during config restore, where if
'.promiscuous_enable/disable' dev_ops exists and return any value other
than '-ENOTSUP', start will fail.
Same is done for '.allmulticast_enable/disable' dev_ops.
Fixes: ddc7cb0d94 ("net/i40e: re-program promiscuous mode on VF interface")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Interrupt mapping should be 1:n queue(s).This patch fixes the
logic of interrupt bind by code reconstruction.
Fixes: 6a6cf5f88b ("net/i40e: enable multi-queue Rx interrupt for VF")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Coverity complains of unchecked return value warning of
i40e_xmit_cleanup, while this cleanup is opportunistic and will not
cause problems if it fails. So instead of checking the return value of
i40e_xmit_cleanup and return in case of cleanup failure, we directly
cast it to void function to make the Coverity happy.
Coverity issue: 353617
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Merge of ESP and L2TP code in i40e_fdir.c added checks on
cus_pctype->index which caused flow creation for ESP to fail.
Added fill_ipv4_function()
Refactored code to have one path for customized and non customized
pctype's.
Fixes: c5f8365bc8 ("net/i40e: support flow director for L2TPv3 over IP")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Rory Sexton <rory.sexton@intel.com>
Three warnings are commonly disabled in DPDK with make and meson:
* address-of-packed-member
always disabled
* missing-field-initializers
disabled with meson
disabled with make + clang or make + gcc < 4.7
disabled with make + gcc <= 5 for test files and event drivers
* packed-not-aligned
disabled with meson
This change is removing exceptions for missing-field-initializers.
As it is always disabled, some redundant configs are cleaned up.
Now the situation is:
* address-of-packed-member
always disabled
* missing-field-initializers
always disabled
* packed-not-aligned
disabled with meson
It could alternatively be decided to disable missing-field-initializers
only for old gcc (< 6).
The warning packed-not-aligned is not modified in this change.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The interrupt vector which bind to queues should not be larger than
the max available vector. It will cause port start failed. This patch
changed the judgement condition of the limited vector id. It can
effectively avoid vector id out of range.
Fixes: 6a6cf5f88b ("net/i40e: enable multi-queue Rx interrupt for VF")
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Since VF has no need of firmware, we can skip further adminq init which
involves firmware operation, this patch fixes the testpmd segfault issue
when starting with i40e VF.
Fixes: d5e1a14936 ("net/i40e/base: check MAC type")
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add warning and counter to handle the malicious driver detection (MDD)
event.
When the hardware determines that a malicious driver on VF, this VF will
become unworkable, the PF records and gives a warning message.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
add fill_ip6_head()
hardcode udp destination port to 4500
handle ESP and AH pctypes in ESP-AH profile
update the i40e user guide with ESP information.
update release notes for i40e changes
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add flow structures for the following patterns in i40e_ethdev files:
eth/ipv4/esp
eth/ipv6/esp
eth/ipv4/udp/esp
eth/ipv6/esp/udp
add oip_type in filter
add is_udp in filter
use tenant_id in filter for spi
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support to the i40e driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Adding FDIR support for L2TPv3 over IP header matching and adding
a new customized pctype for l2tpv3 over IP.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch fixes 'NIC Link is Up, Unknown bps' message in dmesg
for 2.5Gb/5Gb speeds. This problem is fixed by adding constants
for VIRTCHNL_LINK_SPEED_2_5GB and VIRTCHNL_LINK_SPEED_5GB.
Fixes: a58860f689 ("net/i40e/base: use new virtchnl header file")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add X710T*L device specific operations (in port LED detection and
handling of GLGEN_GPIO_CTL.PIN_FUNC field) to enable LED blinking.
Signed-off-by: Damian Milosek <damian.milosek@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Some VFs may want to disable CRC stripping on incoming packets
so create an offload for that. The VF already sends information
about configuring it's RX queues so use that structure to
indicate that the CRC stripping should be enabled or not.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce offsets of firmware registers holding a number of EMP resets.
Implement offsets as a preprocessor's constants.
Required by drivers to read a number of EMP resets reported by FW.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The previous code had the LED code wrapped such that, it was
static to the file and not usable outside of it. It is now available.
Signed-off-by: Mateusz Rusinski <mateusz.rusinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
There was no time duration statistics for LPI (Low Power Idle)
in EEE (Energy-Efficient Ethernet).
Added new procedure to get duration values from FW.
Otherwise there is no available procedure to get tx_lpi_duration
and rx_lpi_duration values.
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The X722 FW API version 1.9 adds support for accessing PHY
registers with Admin Queue Command. This enables reading
EEPROM data from (Q)SFP+ transceivers, what was previously
possible only on X710 devices.
Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The result of the check is always FALSE and the code within "if"
is never executed.
Signed-off-by: Dzmitry Sautsa <dzmitryx.sautsa@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add defines for creating Flow Director flows as defined in datasheet
section 7.1.5.4 for field vectors.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix display of FEC settings for ethtool.
This patch change variable 'phy.link_info.req_fec_info' sent to ethtool.
Without this patch wrong FEC settings can be shown.
Fixes: 1216fb9f0c ("net/i40e/base: store the requested FEC information")
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
