We will need to refer to external heaps in some way. While we use
heap ID's internally, for external API use it has to be something
more user-friendly. So, we will be using a string to uniquely
identify a heap.
This breaks the ABI, so document the change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We will be assigning "invalid" socket ID's to external heap, and
malloc will now be able to verify if a supplied socket ID is in
fact a valid one, rendering parameter checks for sockets
obsolete.
This changes the semantics of what we understand by "socket ID",
so document the change in the release notes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Switch over all parts of EAL to use heap ID instead of NUMA node
ID to identify heaps. Heap ID for DPDK-internal heaps is NUMA
node's index within the detected NUMA node list. Heap ID for
external heaps will be order of their creation.
This breaks the ABI, so document the changes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we allocate and use DPDK memory, we need to be able to
differentiate between DPDK hugepage segments and segments that
were made part of DPDK but are externally allocated. Add such
a property to memseg lists.
This breaks the ABI, so document the change in release notes.
This also breaks a few internal assumptions about memory
contiguousness, so adjust malloc code in a few places.
All current calls for memseg walk functions were adjusted to
ignore external segments where it made sense.
Mempools is a special case, because we may be asked to allocate
a mempool on a specific socket, and we need to ignore all page
sizes on other heaps or other sockets. Previously, this
assumption of knowing all page sizes was not a problem, but it
will be now, so we have to match socket ID with page size when
calculating minimum page size for a mempool.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Previously, to calculate length of memory area covered by a memseg
list, we would've needed to multiply page size by length of fbarray
backing that memseg list. This is not obvious and unnecessarily
low level, so store length in the memseg list itself.
This breaks ABI, so bump the EAL ABI version and document the
change. Also, while we're breaking ABI, pack the members a little
better.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch add support to use select call with qman portal fd
for timeout based dequeue request for eventdev.
If there is a event available qman portal fd will be set
and the function will be awakened. If no event is available,
it will only wait till the given timeout value.
In case of interrupt the timeout ticks are used as usecs.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Currently, command-line switches for legacy mem mode or single-file
segments mode are only stored in internal config. This leads to a
situation where these flags have to always match between primary
and secondary, which is bad for usability.
Fix this by storing these flags in the shared config as well, so
that secondary process can know if the primary was launched in
single-file segments or legacy mem mode.
This bumps the EAL ABI, however there's an EAL deprecation notice
already in place[1] for a different feature, so that's OK.
[1] http://patches.dpdk.org/patch/43502/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Make the ethernet port id passed into
rte_event_eth_rx_adapter_caps_get() 16 bit.
Also, update the event rx adapter test to use 16 bit
ethernet port ids.
Fixes: c2189c907dd1 ("eventdev: make ethdev port identifiers 16-bit")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add programmer's guide doc to explain the use of the
Event Ethernet Tx Adapter library.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ethernet Tx adapter abstracts the transmit stage of an
event driven packet processing application. The transmit
stage may be implemented with eventdev PMD support or use a
rte_service function implemented in the adapter. These APIs
provide a common configuration and control interface and
an transmit API for the eventdev PMD implementation.
The transmit port is specified using mbuf::port. The transmit
queue is specified using the rte_event_eth_tx_adapter_txq_set()
function.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The DSW event device is documented in DPDK Programmer's Guide.
The MAINTAINERS file and the 18.11 release notes are updated.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The below change set suppose to bump the eventdev shared library version.
It missed updating the version number so fixing it now.
Fixes: 3810ae435783 ("eventdev: add interrupt driven queues to Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Adding 3DES-ECB & AES-XTS to the list of ciphers supported
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Update the QAT documentation to show that it supports CCM.
Fixes: ab56c4d9ed9a ("crypto/qat: support AES-CCM")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Cel <tomaszx.cel@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
LB stans for 'Linear Buffers'. For the 'Scatter-gatter list' we have
SGL acronym.
Fixes: 2717246ecd7d ("cryptodev: replace mbuf scatter gather flag")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Update the doc for virtio-user to use the latest testpmd
parameters and commands.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Document MTR (metering) and TM (traffic management) usage plus
do some small updates here and there.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
This patch introduces necessary changes required by MUSDK 18.09 library.
* As of MUSDK 18.09, pp2_cookie_t is no longer available. Now
RX descriptor cookie is defined as plain u64 so existing cast
is no longer valid.
* MUSDK 18.09 increased number of available bpools (buffer hw pools) by
introducing dma regions support. Update mvpp2 driver accordingly.
* replace MV_NET_IP4_F_TOS with MV_NET_IP4_F_DSCP
Before this patch, API allowed to configure a classification rule
according to IPv4 TOS, which was not supported in classifier. This patch
fixes this by using proper field.
* use 48 bit address mask
We cannot get pointers exceeding 48 bits thus using 48 bit
mask for extracting higher IOVA address bits is enough.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Yuval Caduri <cyuval@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Shlomi Gridish <sgridish@marvell.com>
Reviewed-by: Alan Winkowski <walan@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Change QoS configuration file syntax for port's default policer
setup.
Since default policer configuration is performed before
any other policer configuration we can pick a default id.
This simplifies default policer configuration since user
no longer has to choose ids from range [0, PP2_CLS_PLCR_NUM].
Explicitly document values for rate_limit_enable field.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
set_mc_addr_list method is not implemented by the driver yet.
Fixes: a46f8d584eb8 ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Evgeny Im <evgeny.im@oktetlabs.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
For IA, the AVX2 vector path is only recommended to be used on later
platforms (identified by AVX512 support, like SKL etc.) This is because
performance benchmark shows downgrade when running AVX2 vector path on
early platform (BDW/HSW) in some cases. But we still observe perf gain
with some real work loading.
So this patch introduced the new devarg use-latest-supported-vec to
force the driver always selecting the latest supported vec path. Then
apps are able to take AVX2 path on early platforms. And this logic can
be re-used if we will have AVX512 vec path in future.
This patch only affects IA platforms. The selected vec path would be
like the following:
Without devarg/devarg = 0:
Machine vPMD
AVX512F AVX2
AVX2 SSE4.2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
With devarg = 1
Machine vPMD
AVX512F AVX2
AVX2 AVX2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
Other platforms can also apply the same logic if necessary in future.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
__rte_mbuf_raw_free and __rte_pktmbuf_prefree_seg have been deprecated for
a long time now (early 17.05), are not part of the abi and are easily
replaced with existing api.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This will allow the same config file to be used from Meson.
The result has been verified to be identical via diffoscope.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This will make it possible to generate the file in the same way from
Meson as well.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The QAT compression driver was named "qat".
Rename to compress_qat for consistency with other compressdev drivers
and with crypto_qat.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Added description of the build configuration options for QAT.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Update PMD build section.
Linked to kernel dependency section and refactored text
between those 2 sections.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Add overview of QAT doc sections and link between them.
Indent to next level all sections within
the crypto and common sections.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Add section to common QAT part of doc about
which tests can be used to exercise
QAT compress and crypto PMDS
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Integrate accelerated networking support into netvsc PMD.
This allows netvsc to manage VF without using failsafe or vdev_netvsc.
For the exception vswitch path some tests like transmit
get a 22% increase in packets/sec.
For the VF path, the code is slightly shorter but has no
real change in performance.
Pro:
* using netvsc is more like other DPDK NIC's
* the exception packet uses less CPU
* much smaller code size
* no locking required on VF transmit/receive path
* no legacy Linux network device to get mangled by userspace
* much simpler (1K vs 9K) LOC
* unified extended statistics
Con:
* using netvsc has more complex startup model
* no bifurcated driver support
* no flow support (since host does not have flow API).
* no tunnel offload support
* no receive interrupt support
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Implement callback functionality on link state changes.
This is not really driven off of interrupt file descriptor like most other
PMD's. Instead, it happens when a link state change message arrives
in the common ring buffer.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add flow operations to match packets based on destination MAC address.
Allocate and program hardware MPS table with the destination MAC
address to be matched against. The returned MPS index is then used while
offloading flows to LETCAM (maskfull) and HASH (maskless) filter regions.
Also update existing mac_addr_set() to use the new MPS table API.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add flow API operations to offload vlan push, pop, and rewrite actions.
For vlan push or rewrite actions, allocate and program an entry from
L2T table. Use the L2T index to program vlan actions for LETCAM
(maskfull) and HASH (maskless) filters.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
