Add options to set mbuf size and max packet size which allow the user to
enable jumbo frames and Rx/Tx scatter gather.
Arrange `struct evt_options` based on ascending order of data type to
make it more readable.
Packet mbuf size can be modified by using `--mbuf_sz=N`.
Max packet size can be modified by using `--max_pkt_sz=N`.
These options are only applicable `pipeline_atq` and `pipeline_queue`
tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to int, so
this patch modify rte_eth_dev_info_get() usage across apps
according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When using synthetic and timer event producer reduce the calls made to
mempool library by using get_bulk() instead of get().
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When producer type is event timer adapter producer lcore checks are
skipped. Since, timer adapter relies on SW to arm timers producer lcore
is essential for its functionality.
Verify producer lcore validity when producer type is event timer
adapter.
Fixes: b01974da9f ("app/eventdev: add ethernet device producer option")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Configure event ports based on the underlying event device info rather
than using hardcoded values.
Fixes: 5710e75181 ("app/testeventdev: add order port setup")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the worker
ports. If the eventdev hardware supports power management through
dequeue timeout then this option can be used for verifying power
demands at various packet rates.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Start event producers after eventdev i.e. consumer is started as in some
architectures it might lead to undefined behaviour or events being
dropped.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Previously, the total number of event timers per adapter was set to an
arbitrary value, set it to mempool size instead as it defines the max
event timers that can be armed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
If timer events get dropped for some reason, the thread that launched
producer and worker cores will never exit, because the deadlock check
doesn't currently apply to the event timer adapter case. This commit
fixes this.
Fixes: d008f20bce ("app/eventdev: add event timer adapter as a producer")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The DPDK website has a new URL scheme since June 2018.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
When compiling with -O1, this error can appear:
app/test-eventdev/test_pipeline_common.c:332:6: error:
‘ret’ may be used uninitialized in this function
If there is no device, then ret is returned without being initialized.
It is fixed by setting 0 as initial value.
Fixes: 032a965a8f ("app/eventdev: support Tx adapter")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Convert existing Tx service based pipeline to Tx adapter based APIs and
simplify worker functions.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove unnecessary newline at the end of logs.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Use proper teardown sequence when SIGINT is caught to prevent
eventdev from going into undefined state.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some test applications and examples were not converted
to the new offload API introduced in 17.11.
For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The options names in code and doc are not the same.
Fixes: 98c6292105 ("app/eventdev: add options for event timer adapter")
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
test_perf_common.c: In function ‘perf_event_timer_producer’:
test_perf_common.c:99:3: error: missing initializer for
field ‘priority’ of ‘struct <anonymous>’
[-Werror=missing-field-initializers]
.ev.sched_type = t->opt->sched_type_list[0],
Fixes: d008f20bce ("app/eventdev: add event timer adapter as a producer")
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add options to configure expiry timeout, max number of timers and number
of event timer adapters through command line parameters.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add burst mode for event timer adapter that can be selected by passing
--prod_type_timerdev_burst.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add event timer adapter as producer option that can be selected by
passing --prod_type_timerdev.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Since most apps are built in largely the same way, generalize the logic
into a foreach loop in app/meson.build file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The binaries and apps in DPDK all need to be linked against the
execinfo library on FreeBSD so add this as a dependency in cases
where it is found. It's available by default on BSD, but not
at all on Linux
Fixes: 16ade738fd ("app/testpmd: build with meson")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Fixes: 2ff67267b0 ("app/eventdev: build with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The port dequeue depth value has to be compared against the maximum
allowed dequeue depth reported by the event drivers.
Fixes: 3617aae53f ("app/eventdev: add event Rx adapter setup")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This is a pipeline test case that aims at testing the following with
``all types queue`` eventdev scheme.
1. Measure the end-to-end performance of an event dev with a ethernet dev.
2. Maintain packet ordering from Rx to Tx.
The atq queue test functions as same as ``pipeline_queue`` test.
The difference is, It uses, ``all type queue scheme`` instead of separate
queues for each stage and thus reduces the number of queues required to
realize the use case.
Note: The --prod_type_ethdev is mandatory for running the application.
Example command to run pipeline atq test:
sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
--test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=ao
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This is a pipeline queue test case that aims at testing the following:
1. Measure the end-to-end performance of an event dev with a ethernet dev.
2. Maintain packet ordering from Rx to Tx.
The pipeline queue test configures the eventdev with Q queues and P ports,
where Q is (nb_ethdev * nb_stages) + nb_ethdev and P is nb_workers.
The user can choose the number of workers and number of stages through the
--wlcores and the --stlist application command line arguments respectively.
The probed ethernet devices act as producer(s) for this application.
The ethdevs are configured as event Rx adapters that enables them to
injects events to eventdev based the first stage schedule type list
requested by the user through --stlist the command line argument.
Based on the number of stages to process(selected through --stlist),
the application forwards the event to next upstream queue and when it
reaches last stage in the pipeline if the event type is ATOMIC it is
enqueued onto ethdev Tx queue else to maintain ordering the event type is
set to ATOMIC and enqueued onto the last stage queue.
On packet Tx, application increments the number events processed and print
periodically in one second to get the number of events processed in one
second.
Note: The --prod_type_ethdev is mandatory for running the application.
Example command to run pipeline queue test:
sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
--test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=ao
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The event master lcore's test termination and the logic to print the mpps
are common for the queue and all types queue test.
Move them as the common function.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Setup one port event port for Tx and link the respective event queue.
Register the Tx function as a service to be called from a service core.
The Tx function dequeues the events from the event queue and transmits
the packet to its respective ethernet port.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Setup one port per worker and link to all queues and setup producer port
based on Rx adapter capabilities.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add common ethdev port setup and destroy along with event dev destroy.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
