The virtual queue ring size and the number of slots actually usable
are separate parameters. In the most common environment (QEMU)
the virtual queue ring size is 256, but some environments the
ring maybe much larger.
The ring size comes from the host and the driver must use the
actual size passed.
The number of descriptors can be either zero to use the whole
available ring, or some value smaller. This is used to limit
the number of mbufs allocated for the receive ring. If more
descriptors are requested than available the size is silently
truncated.
Note: the ring size (from host) must be a power of two, but
the number of descriptors used can be any size from 1 to the
size of the virtual ring.
Fixes: d78deadae4dc ("virtio: fix ring size negotiation")
Reported-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Cleanup the code in bonding that checks ports.
* Use standard rte_eth_dev_is_valid_port
* Change name of driver string to avoid variable namespace conflicts
* Get rid of unnecessary string comparison stuff. A simple pointer
check is enough here.
* Get rid of unnecessary assignment of driver_name, it is already
done by common code.
* Don't generate unnecessary log messages on error.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
I40e VF driver uses the num_queue_pairs in vf structure to construct
queue index look up table. When the nb_rx_queue is less than nb_tx_queue,
num_queue_pairs is equal to nb_tx_queue. It will make the table use
invalid queue index, then application cannot poll packets on these queues.
This patch also moves the inline function i40e_align_floor from
i40e_ethdev.c to i40e_ethdev.h.
Test report: http://dpdk.org/ml/archives/dev/2015-July/021838.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Due to the NIC's firmware update, the input set of sctp flow is changed
to source IP, destination IP, source port, destination port and
Verification-Tag. This patch adds the sport and dport in the programming
packet of flow director.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Add function virtio_free_queues() and call from virtio_dev_close()
Use virtio_dev_rx_queue_release() and virtio_dev_tx_queue_release()
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add functions virtio_dev_queue_release(), virtio_dev_rx_queue_release() and
virtio_dev_tx_queue_release().
Use queue_release in virtio_dev_uninit().
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
If vq is NULL, there is a segmentation fault.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit_t() function for virtio pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add i40e_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
There is a segmentation fault if rxq is NULL.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
_clear_cmd() was not being called in failure situations,
resulting in the next command also failing.
Fix several typos.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_i40e_pmd and
rte_i40evf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add ixgbe_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_ixgbe_pmd and
rte_ixgbevf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Queues were freed in clear function called in stop function.
Split clearing and freeing in separate functions to
move queue freeing from stop to close function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_em_pmd,
rte_igb_pmd and rte_igbvf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
ierrors only included a base set of error statistics, this patch adds
additional error registers to ierrors.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add the NIC/HW specific stats that were removed from rte_ethdev.c to
the extended stats in ixgbe.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Move stats register reads to ixgbe_read_stats_registers() as it will be
used by the functions to retrieve stats and extended stats.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
add function to support ethtool ops:
- get_reg_length
- get_regs
- get_eeprom_length
- get_eeprom
- set_eeprom
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
add function to support ethtool ops:
- get_reg_length
- get_regs
- get_eeprom_length
- get_eeprom
- set_eeprom
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- set_mac_addr
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- set_mac_addr
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move malloc inside eal and create a new section in MAINTAINERS file for
Memory Allocation in EAL.
Create a dummy malloc library to avoid breaking applications that have
librte_malloc in their DT_NEEDED entries.
This is the first step towards using malloc to allocate memory directly
from memsegs. Thus, memzones would allocate memory through malloc,
allowing to free memzones.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The workaround for Tx tunnel offloading can now be replaced with packet
type flag checking.
The ol_flags for IPv4/IPv6 and tunnel Rx offloading are replaced with
packet type flags.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be enabled
by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To unify packet type among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Note that around 2.5% performance drop (64B) was observed of doing
4 ports (1 port per 82599 card) IO forwarding on the same SNB core.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In order to unify the packet type, the field of 'packet_type' in
'struct rte_mbuf' needs to be extended from 16 to 32 bits.
Accordingly, some fields in 'struct rte_mbuf' are re-organized to support
this change for Vector PMD.
As 'struct rte_kni_mbuf' for KNI should be right mapped to
'struct rte_mbuf', it should be modified accordingly.
In ixgbe PMD driver, corresponding changes are added for the mbuf changes,
especially the bit masks of packet type for 'ol_flags' are replaced by
unified packet type. In addition, more packet types (UDP, TCP and SCTP)
are supported in vectorized ixgbe PMD.
To avoid breaking ABI compatibility, all the changes would be enabled by
RTE_NEXT_ABI.
Note that around 2% performance drop (64B) was observed of doing 4 ports
(1 port per 82599 card) IO forwarding on the same SNB core.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added RX and TX bytes counter support to the PCAP statistics.
Added TX counter support for pcap dumper and interface functions.
Renamed RX and TX packet counters for consistency.
Signed-off-by: Klaus Degner <kd@allegro-packets.com>
Tested-by: John McNamara <john.mcnamara@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.
Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit adds a poll mode driver for the mPIPE hardware present on
TILE-Gx SoCs.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Extend eth_pcap rx and tx to support jumbo frames.
On the receive side read large packets into multiple mbufs and
on the transmit side convert them back to a single pcap buffer.
Signed-off-by: Tero Aho <tero.aho@coriant.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
fm10k has 128 RETA entries in 32 registers, but it only initialized
first 32 when doing multiple rx queue configurations. This fix will
initialize all 128 entries instead.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
The default MAC address is read from hardware and copied to
Device Ethernet Link address array in the device initialization phase,
which bypasses fm10k MAC address number check mechanism,
and will cause an error message when adding default VLAN:
"MAC address number not match"
Fix it by moving default MAC address registration to device
initialize phase.
Fixes: f5c1a236a218 ("fm10k: fix default mac/vlan in switch")
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
If a descriptor the device drive is handling is the context descriptor,
its type value will be 0x1.
When using the not operator ! to do the conditional check, if the expression
value is zero, the device driver will consider the transaction for this
descriptor has been completed, even its DD field is still 0x1 which means
NIC has not finished the operation on this descriptor.
Use the 0xF to check the DD status to avoid the above issue happens.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Fixes: 05999aab4ca6 ("i40e: add or delete flow director")
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
There's a parameter "autoneg on|off" in testpmd CLI "set flow_ctrl ...". This
parameter is used to enable/disable auto negotiation for flow control. But it's
not supported yet.
The auto negotiation is enabled by default, we have no way to disable it. This
patch lets the parameter "autoneg on|off" be supproted.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
When initialize the hardware, the stat should be reset.
Otherwise when detach then attach port, the stat will not
be re-init to zero.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
