Rather than checking the binutils version number, which can lead to
unnecessary disabling of AVX512 if fixes have been backported to distro
versions, we can instead check the output of "as" from binutils to see if
it is correct.
The check in the script uses the minimal assembly reproduction code posted
to the public bug tracker for gcc/binutils for those issues [1]. If the
binutils bug is present, the instruction parameters - specifically the
displacement parameter - will be different in the disassembled output
compared to the input. Therefore the check involves assembling a single
instruction and disassembling it again, checking that the two match.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the --as-needed linker flag to the DPDK library list in the pkg-config
file so as to prevent overlinking. Without this flag, when linking
statically using flags from $(pkg-config --static --libs libdpdk), all DPDK
drivers and libs were statically linked in, but the binary was also
requiring all the shared versions be present to run.
The real root-cause of this issue is that the DPDK libraries need to be
duplicated in the linker command when doing static linking, due to the
behaviour of pkg-config, but since that behaviour cannot be easily changed,
this is a simple workaround to avoid problems.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rather than setting -Bstatic in the linker flags when doing a static link,
and then having to explicitly set -Bdynamic again afterwards, we can update
the pkg-config file to use -l:libfoo.a syntax to explicitly refer to the
static library in question. Since this syntax is not supported by meson's
pkg-config module directly, we can post-process the .pc files instead to
adjust them.
Once done, we can simplify the examples' makefiles and the docs by removing
the explicit static flag.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When calling pkg-config --static --libs, pkg-config will always output the
regular libs first, and then the extra libs from Libs.private field,
since the assumption is that those are additional dependencies for building
statically that the .a files depend upon.
However, for DPDK, we only link the driver files for static builds, and
those need to come *before* the regular libraries. To get this result, we
need two pkgconfig files for DPDK, one for the shared libs, and a second
for the static libs and drivers, which depends upon the first. Using a
dependency means that the shared libs are printed only after the
Libs.private field rather than before.
Without this patch, the linking works in DPDK because in all cases we
specify the libraries after the drivers in the Libs.private line, ensuring
that the references to the libs from the drivers can be resolved. The
current output is therefore of the form, "(shared)libs, drivers,
(static)libs", while after this patch the output is, "drivers,
(static)libs, (shared)libs". The former case will not work if we use the
--whole-archive flag on the static libs as it will lead to duplicate
definitions due to some references having been previously resolved from the
shared libraries. By ensuring the shared libraries come last in the link
link, this issue does not occur, as duplicate references when linking the
shared libs will be ignored.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Ahead of changes to rework the file, move the pkg-config file generation to
a new directory under buildtools. This allows the meson code to be
separated out from the main meson.build for simplicity, and also allows any
additional scripts for working with the pkg-config files to be placed there
too.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Some places were calling the meson function host_machine.system()
instead of the variables is_windows and is_linux defined
in config/meson.build.
At the same time, the missing "Linux restriction" reason is added to
pfe and octeontx2 crypto PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The MinGW build for Windows has special cases where exported
function contain additional prefix:
__emutls_v.per_lcore__*
To avoid adding those prefixed functions to the version.map file
the map_to_def.py script was modified to create a map file for MinGW
with the needed changed.
The file name was changed to map_to_win.py and lib/meson.build map output
was unified with drivers/meson.build output
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
On v20.02 some APIs matured and symbols moved from EXPERIMENTAL to
DPDK_20.0.1 block.
This had the affect of breaking the applications that were using these
APIs on v19.11. Although there is no modification of the APIs and the
action is positive and matures the APIs, the affect can be negative to
applications.
When a maintainer is promoting an API to become part of the next major
ABI version by removing the experimental tag. The maintainer may
choose to offer an alias to the experimental tag, to prevent these
breakages in future.
The following changes are made to enabling aliasing:
Updated to the ABI policy and ABI versioning documents.
Created VERSION_SYMBOL_EXPERIMENTAL helper macro.
Updated the 'check-symbols.sh' tool, which was complaining that the
symbol is in EXPERIMENTAL tag in .map file but it is not in the
.experimental section (__rte_experimental tag is missing).
Updated tool in a way it won't complain if the symbol in the
EXPERIMENTAL tag duplicated in some other block in .map file (versioned)
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Add checks during build to ensure that all symbols in the INTERNAL
version map section have __internal tags on their definitions, and
enable the warnings needed to announce their use.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch adds SPDX license tag to pmdinfogen files.
These files are originally drived from kernel.
They are being used as binary tool to support internal
build.
This patch requires license exception approval from
DPDK Technical Board and Governing Board.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
If ibverbs_link is static and the application choose to link DPDK
as static libraries, both PMD and ibverbs libraries must be linked
as static libraries. And the dependencies of ibverbs (netlink) must
still be linked as shared libraries.
Unfortunately, meson forget about the static requirement for ibverbs
when generating the .pc file.
As a result, libibverbs, libmlx4, libmlx5 are listed in Requires.private
section (allowing to be linked as shared libraries) and libnl is missing.
A fix is in progress for meson, but anyway we will have to live without
such a fix until a better version of meson is widely available:
https://github.com/mesonbuild/meson/pull/6393
In order to avoid meson suggesting shared libraries in the section
Requires.private of the .pc file, the dependency object is recreated
with declare_dependency():
- cflags are extracted the libibverbs.pc
- ldflags, from libibverbs.pc, are processed to force
static flavor of ibverbs libraries, thanks to this syntax:
-l:libfoo.a
Fixes: 6affeabaf3 ("net/mlx: add static ibverbs linkage with meson")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The shell script options-ibverbs-static.sh was used with make
in forcing static linkage of ibverbs libraries.
When choosing to link with a static dependency in meson,
the generated .pc file will not force such static linkage.
The solution will rely on using this script in meson.
If linking with libraries installed in a non-standard path,
an option -L is provided via EXTRA_LDFLAGS in case of using make.
With meson, tuning PKG_CONFIG_PATH for pkg-config should be enough.
When statically linking an application, the .pc file must save the
-L path so the application link will work without any extra option.
That's why --libs-only-l is replaced with --libs which includes -L.
Options which are neither -l or -L are filtered out because not needed
and can cause compilation issues with the legacy system using make.
The other change in this script is to drop the first occurrences of the
main library file (libiverbs.a). Only the last occurrence is kept.
It fixes some undefined references when linking a static application
using libdpdk.pc.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The header file rte_config.h is always included by make or meson.
If required in an exported API header file, it must be included
in the public header file for external applications.
In the internal files, explicit include of rte_config.h is useless,
and can be removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Rather than having to explicitly list each and every driver to disable in a
build, we can use a small python script and the python glob library to
expand out the wildcards. This means that we can configure meson using e.g.
meson -Ddisable_drivers=crypto/*,event/* build
to do a build omitting all the crypto and event drivers. Explicitly
specified drivers e.g. net/i40e, work as before, and can be mixed with
wildcarded drivers as required.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Luca Boccassi <bluca@debian.org>
If a driver has no info generated by pmdinfogen,
and if this driver is compiled as pedantic,
then an failure would occur:
drivers/rte_common_mlx5.pmd.c:1: error:
ISO C forbids an empty translation unit [-Werror=pedantic]
Such error is triggered with the new mlx5 common directory.
In order to allow an "empty driver info" compiled in pedantic mode,
the script generating .pmd.c file is modified to add a static string
unconditionnaly.
The minimal generated code is:
static __attribute__((unused)) const char *generator =
"/path/to/dpdk/buildtools/gen-pmdinfo-cfile.sh";
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add proper support for calling sphinx whenever a file in the doc
directory changes. This is accomplished by using a wrapper script
for sphinx, which runs sphinx but also emits a gcc-format dependency
file listing all the doc files. This is used by ninja so that any
change to the doc files triggers a rebuild of the docs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Those scripts are only used by developers and not part of the build
process.
Move them to devtools so they are not installed.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A compiler can reuse a variable name and prefix it when instrumenting
with coverage.
Example:
$ make defconfig T=x86_64-native-linux-gcc O=master
$ make EXTRA_CFLAGS='--coverage' O=master
[...]
CC rte_flow.o
rte_flow_dynf_metadata_offs is not flagged as experimental but is listed
in version map
Please add __rte_experimental to the definition of
rte_flow_dynf_metadata_offs
$ objdump -t master/build/lib/librte_ethdev/rte_flow.o |grep _offs$
0000000000000000 l F .text.startup 000000000000000a
_GLOBAL__sub_I_65535_0_rte_flow_dynf_metadata_offs
0000000000000620 g O .data 0000000000000004
rte_flow_dynf_metadata_offs
Protect against this by adding a space character in the pattern.
Fixes: a4bcd61de8 ("buildtools: add script to check experimental API exports")
Cc: stable@dpdk.org
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The map-list-symbol.sh script displays the filename, section and symbol
names of map files.
Example:
$ buildtools/map-list-symbol.sh -S EXPERIMENTAL \
lib/librte_ethdev/rte_ethdev_version.map |grep rte_mtr_create
lib/librte_ethdev/rte_ethdev_version.map EXPERIMENTAL rte_mtr_create
The experimental symbol check should only consider the symbol name.
Fixes: 3290ac14eb ("buildtools: detect discrepancies for experimental symbols")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Add a shell script that checks whether built libraries are
versioned with expected ABI (current ABI, current ABI + 1,
or EXPERIMENTAL).
The following command was used to verify current source tree
(assuming build directory is in ./build):
find ./build/lib ./build/drivers -name \*.so \
-exec ./buildtools/check-abi-version.sh {} \; -print
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In order to facilitate mass updating of version files, add a shell
script that recurses into lib/ and drivers/ directories and calls
the ABI version update script.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add a script that automatically merges all stable ABI's under one
ABI section with the new version, while leaving experimental
section exactly as it is.
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
As per new ABI policy [1], all of the libraries are now versioned using
one global ABI version. Stable libraries use the MAJOR.MINOR ABI
version for their shared objects, while experimental libraries
use the 0.MAJORMINOR convention for their versioning.
Experimental library versioning is managed globally. Changes in this
patch implement the necessary steps to enable that.
The CONFIG_RTE_MAJOR_ABI option was introduced to permit multiple
DPDK versions installed side by side. The problem is now addressed
through the new ABI policy, and thus can be removed.
[David] For external libraries relying on Makefile, LIBABIVER is
preserved to avoid using DPDK global ABI version.
[1] https://doc.dpdk.org/guides/contributing/abi_policy.html
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Call check-experimental-syms.sh script as part of the meson build to ensure
that all functions are correctly tagged.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The check-experimental-syms.sh script was finding the map-list-symbol.sh
script using $RTE_SDK, which is the variable set when using the "make"
build system. To make this script more independent, we just use the current
path of the script as the location to find its companion script.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Dumping every object file for every symbol is too heavy.
Use a temporary storage.
Before:
$ rm -rf master && make defconfig O=master
$ time make EXTRA_CFLAGS=-g O=master
[...]
real 2m24.063s
user 1m16.985s
sys 1m46.372s
After:
$ rm -rf master && make defconfig O=master
$ time make EXTRA_CFLAGS=-g O=master
[...]
real 1m37.110s
user 0m49.417s
sys 0m51.803s
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
There should not be blank lines at end of files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For some reason, ICC creates additional global symbols with a . which
triggers an error in the check that validates that symbols in the
experimental section are properly published in the map file of the
library. Filter them out.
Fixes: 3290ac14eb ("buildtools: detect discrepancies for experimental symbols")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
When promoting those symbols as stable, there is no check to ensure that
the final result is consistent.
Add a little script to get the symbols per section from the library map
files.
Validate that all experimental symbols in object files are referenced by
library map files.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Rather than having a separate version.map file for linux/BSD and an
exports definition file for windows for each library, generate the
latter from the former automatically at build time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The post-install script to symlink the PMDs from their own PMD directory to
the regular lib directory (so they would be found by ld at runtime) was
using the "-r" flag to ln to create relative symlinks. This flag is
unsupported by ln on FreeBSD causing the ninja install step to fail.
Reworking the script to take the relative driver path as parameter removes
the need for ln to calculate the relative path ensuring compatibility with
FreeBSD.
As part of the fix, we move the registration of the install script to the
config/meson.build file, from the top level one. This improves readability
as the script takes as parameters the variables set in that file.
Fixes: ed4d43d73e ("build: symlink drivers to library directory")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Added meson workarounds to build helloworld on Windows.
Windows currently only supports kvargs and eal libraries.
This change restricts the build flow to supported libraries
only.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When building using make, the Makefile in the build directory contained
the name of the build directory to be passed as an "O=" parameter to
the DPDK SDK makefiles. Unfortunately, this meant that the compilation
would always fail if the build directory was renamed. To remove this
limitation, we can use $(CURDIR) instead of the directory name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With "make -C test/" command getting following warnings:
awk: cmd. line:1: fatal: cannot open file `/cmdline_test/cmdline_test/'
for reading (No such file or directory)
awk: cmd. line:1: fatal: cannot open file
`/test-pipeline/test-pipeline/' for reading (No such file or
directory)
awk: cmd. line:1: fatal: cannot open file `/test-acl/test-acl/'
for reading (No such file or directory)
This is because unexpected/invalid MAPFILE param passed to
check-experimental-syms.sh
There is no easy way to unify MAPFILE for different build options,
instead add an input verification to script, and silently ignore wrong
values.
Fixes: a6ec31597a ("mk: add experimental tag check")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
build error:
== Build drivers/net/tap
mktemp: cannot create temp file /tmp/dpdk.auto-config-h.sh.XXX.c:
Invalid argument
.../buildtools/auto-config-h.sh: line 86: : No such file or directory
.../drivers/net/tap/Makefile:55: recipe for target
'tap_autoconf.h.new' failed
Above error observed on Wind River Linux 8.0
`mktemp` command in that system has a restrictions to have X in
the template at the end and at least six of them.
Complied to mktemp requirements and add -xc flag to compiler to say
`temp` file is a C file
Fixes: ff37ca5d37 ("devtools: use a common prefix for temporary files")
Reported-by: Shuai Zhu <shuaix.zhu@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
We use _GNU_SOURCE all over the place, but often times we miss
defining it, resulting in broken builds on musl. Rather than
fixing every library's and driver's and application's makefile,
fix it by simply defining _GNU_SOURCE by default for all
builds.
Remove all usages of _GNU_SOURCE in source files and makefiles,
and also fixup a couple of instances of using __USE_GNU instead
of _GNU_SOURCE.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The experimental symbol check script matched on the regexes
"\.text.*$SYM" and "\.text\.experimental.*$SYM" which allows for
substring matches.
If a symbol is leading substring of another one (e.g. symbol foo
is a substring of symbol foobar), it would match on symbols
when it shouldn't.
It is fixed by matching additionally on the end of line
so that symbols are an exact match.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Some temporary files were generated in /tmp, others in the current
directory, and none was "dpdk prefixed".
All these files have a common path prefix now: $TMPDIR/dpdk.
TMPDIR is /tmp by default.
Note: the previous use of mktemp, with a template but without -t,
was generating a file in the current directory.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The "-Wimplicit-fallthrough=2" option was introduced into gcc 7.0, it was
enabled when the cross compiler gcc is greater than 7.0, but for the host
side buildtools/pmdinfogen, if the native gcc is older than 7.0, or the
host cc compiler is clang, it should not be enabled.
The fix is to differentiate the host gcc Werror options from the cross gcc.
gcc -Wp,-MD,./.pmdinfogen.o.d.tmp -W -Wall -Wstrict-prototypes
-Wmissing-prototypes -Wmissing-declarations -Wold-style-definition
-Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual
-Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -Wdeprecated
-Werror -Wimplicit-fallthrough=2 -Dbbb -Wno-format-truncation -g
-I/dpdk/build/include -o pmdinfogen.o -c
~/dpdk/buildtools/pmdinfogen/pmdinfogen.c gcc: error:
unrecognized command line option ‘-Wimplicit-fallthrough=2’
Fixes: ced3e6f8 ("mk: adjust gcc flags for new gcc 7 warnings")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If build fails because of failed experimental check and stdout is
redirected to /dev/null, it is absolutely unclear why build fails.
Fixes: a4bcd61de8 ("buildtools: add script to check experimental API exports")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Coverity flags an issue where the resources used by the FILE object for
the temporary input file are leaked. This is a very minor issue, but is
easily fixed, while also avoiding later problems where we try to close
an invalid file descriptor in the failure case.
The fix is to use "dup()" to get a new file descriptor number rather than
using the value directly from fileno. This allows us to close the file
opened with tmpfile() within in scope block, while allowing the duplicate
to pass to the outer block and be closed when the function terminates.
As a side-effect I/O in the function is therefore changed from using stdio
fread/fwrite to read/write system calls.
Coverity issue: 260399
Fixes: 0d68533617 ("pmdinfogen: allow using stdin and stdout")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Since meson 0.44, changing any file inside a PMD directory (quite
correctly) triggers a full re-run of meson on build, rather than an
incremental build as with earlier versions. This rerun is needed because
we use "grep" in meson to search for files on which to run pmdinfogen, and
changing any of those files means that grep and, therefore meson, needs to
be rerun. [Previous versions of meson did not track this dependency on the
grep command, and so did incremental builds only.]
If, however, we take advantage of pmdinfogen's ability to use stdin and
stdout instead of files, we can instead use a shell script to process an
entire static archive and generate a single .c file from it. This
eliminates the need for grep, and means that changes to a PMD file only
need an incremental build - a significant time saving.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
