This patch is related to how to calculate relative address for vhost
backend.
The principle is that: based on one or multiple shared memory regions,
vhost maintains a reference system with the frontend start address,
backend start address, and length for each segment, so that each
frontend address (GPA, Guest Physical Address) can be translated into
vhost-recognizable backend address. To make the address translation
efficient, we need to maintain as few regions as possible. In the case
of VM, GPA is always locally continuous. But for some other case, like
virtio-user, GPA continuous is not guaranteed, therefore, we use virtual
address here.
It basically means:
a. when set_base_addr, VA address is used;
b. when preparing RX's descriptors, VA address is used;
c. when transmitting packets, VA is filled in TX's descriptors;
d. in TX and CQ's header, VA is used.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch moves phys addr check from virtio_dev_queue_setup
to pci ops. To make that happen, make sure virtio_ops.setup_queue
return the result if we pass through the check.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We skip kernel managed virtio devices, if it isn't whitelisted.
Before checking if the virtio device is whitelisted, check if devargs
is specified.
Fixes: ac5e1d838d ("virtio: skip error when probing kernel managed device")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a new paramter (flags) to rte_vhost_driver_register(). DPDK
vhost-user acts as client mode when RTE_VHOST_USER_CLIENT flag
is set. The flags would also allow future extensions without
breaking the API (again).
The rest is straingfoward then: allocate a unix socket, and
bind/listen for server, connect for client.
This extension is for vhost-user only, therefore we simply quit
and report error when any flags are given for vhost-cuse.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
With all the previous prepare works, we are just one step away from
the final ABI refactoring. That is, to change current API to let them
stick to vid instead of the old virtio_net dev.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
This change could let us avoid the dependency of "virtio_net"
struct, to prepare for the ABI refactoring.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Introduce a new API rte_vhost_get_ifname() to export the ifname to
application.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Introduce a new API rte_vhost_get_queue_num() to export the number of
queues.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Introduce a new API rte_vhost_get_numa_node() to get the numa node
from which the virtio_net struct is allocated.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
It does not make sense to ask the application to set/unset the flag
VIRTIO_DEV_RUNNING (that used internal only) at new_device()/
destroy_device() callback.
Instead, it should be set after new_device() succeeds and reset before
destroy_device() is invoked inside vhost lib. This patch fixes it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
We keep a common vq structure, containing only vq related fields,
and then split others into RX, TX and control queue respectively.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
[Jianfeng Tan: found and fixed 2 bugs]
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The commit dd856dfcb9 introduced an optimization that prepends virtio
header to mbuf data. It can be used when the tx mbuf is writeable, so we
need to check that the mbuf is direct (i.e. it embeds its own data).
Fixes: dd856dfcb9 ("virtio: use any layout on Tx")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The class id is not filled and makes probing to fail.
Updated the code to use RTE_PCI_DEVICE which fills
the class id with a wildcard value.
Fixes: 701c8d80c8 ("pci: support class id probing")
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The underlying libsso library support SSE4.1 instruction set,
so feature flags of the crypto device must be updated
to reflect this.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Underlying libsso_snow3g library now supports bit-level
operations, so PMD has been updated to allow them.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
In order to avoid using magic numbers, macros for
the IV and digest lengths for Snow3G have been added.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The underlying libsso library that SNOW3G PMD uses has been updated,
so now it is called libsso_snow3g. Also, the path to the library
has been renamed to reflect this changes (now called LIBSSO_SNOW3G_PATH).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The variables AESNI_MULTI_BUFFER_LIB_PATH and LIBSSO_PATH
are not required for "make clean".
It is the same fix as in the commit e277b2397.
Fixes: eec136f3c5 ("aesni_gcm: add driver for AES-GCM crypto operations")
Fixes: 3aafc423cf ("snow3g: add driver for SNOW 3G library")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the virtio driver
to use the new API that seperates name string and value queries.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the i40e driver
to use the new API that seperates name string and value queries.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the fm10k driver
to use the new API that seperates name string and value queries.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the e1000 driver
to use the new API that seperates name string and value queries.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the ixgbe driver
to use the new API that seperates name string and value queries.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Although ppc supports both endianesses, qemu supposes that the cpu is
big endian and enforces this for the virtio-net stuff.
Fix PCI accesses in legacy mode. Only ppc64le is supported at the moment.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The SYSFS_PCI_DEVICES is a constant that makes the PCI testing
difficult as it points to an absolute path. We remove using this
constant and introducing a function pci_get_sysfs_path that gives
the same value. However, the user can pass a SYSFS_PCI_DEVICES env
variable to override the path. It is now possible to create a fake
sysfs hierarchy for testing.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
This patch adds missing DEPDIRS to avoid any library referring to
symbols they are not linked against.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Add the missing external dependency to pthread to avoid referring to
symbols the library is not linked against.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Up to now dependencies between DPDK internal libraries have been
untracked at shared library level, requiring applications to know
about library internal dependencies and often consequently overlinking.
Since the dependencies are already recorded for build ordering in the
makefiles with DEPDIRS-y we can use that information to generate LDLIBS
entries for internal libraries automatically.
Also revert commit 8180554d82 ("vhost: fix linkage of driver with
library") which is made redundant by this change.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
This patch provides counter mode support to AES-NI multi-buffer library.
The following cipher algorithm is enabled:
- RTE_CRYPTO_CIPHER_AES_CTR
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added possibility for AES to work in counter mode
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
To avoid GCC warning about "dereferencing type-punned pointer will break
strict-aliasing rules" aad_len pointer is dereferenced instead of direct
dereferencing of uint32_t* cast of the middle of an array.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Fix an error with computation of physical address of
content descriptor in the symmetric operations session
Fixes: 1703e94ac5 ("qat: add driver for QuickAssist devices")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Fix null pointer dereferencing by reporting if null and
exiting the function.
Coverity issue: 126584
Fixes: c0f87eb525 ("cryptodev: change burst API to be crypto op oriented")
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix wrong indentation for return value
Coverity issue: 126585
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removed comparison against $CC in Makefiles as
in cross-compiling mode CC can be a different string
instead of string "gcc"
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The qede driver depends on libz but the LDLIBS entry in makefile
was missing. Also because of the external dependency, make it
disabled in default config as per common DPDK policy on external deps.
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some 64-bit variables are printed for debug.
%PRIx64 qualifier must be used because %lx is not long enough
on 32-bit systems
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
The RTE_ETH_VALID_PORTID_OR_ERR_RET macro is used in some places
to check if a port id is valid or not. This commit makes use of it in
some new parts of the code.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some architectures (ex: Power8) have a cache line size of 128 bytes,
so the drivers should not expect that prefetching the second part of
the mbuf with rte_prefetch0(&m->cacheline1) is valid.
This commit add helpers that can be used by drivers to prefetch the
rx or tx part of the mbuf, whatever the cache line size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Introduce rte_mempool_populate_default() which allocates
mempool objects in several memzones.
The mempool header is now always allocated in a specific memzone
(not with its objects). Thanks to this modification, we can remove
many specific behavior that was required when hugepages are not
enabled in case we are using rte_mempool_xmem_create().
This change requires to update how kni and mellanox drivers lookup for
mbuf memory. For now, this will only work if there is only one memory
chunk (like today), but we could make use of rte_mempool_mem_iter() to
support more memory chunks.
We can also remove RTE_MEMPOOL_OBJ_NAME that is not required anymore for
the lookup, as memory chunks are referenced by the mempool.
Note that rte_mempool_create() is still broken (it was the case before)
when there is no hugepages support (rte_mempool_create_xmem() has to be
used). This is fixed in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do not use paddr table to store the mempool memory chunks.
This will allow to have several chunks with different virtual addresses.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that the mempool objects are chained into a list, we can use it to
browse them. This implies a rework of rte_mempool_obj_iter() API, that
does not need to take as many arguments as before. The previous function
is kept as a private function, and renamed in this commit. It will be
removed in a next commit of the patch series.
The only internal users of this function are the mellanox drivers. The
code is updated accordingly.
Introducing an API compatibility for this function has been considered,
but it is not easy to do without keeping the old code, as the previous
function could also be used to browse elements that were not added in a
mempool. Moreover, the API is already be broken by other patches in this
version.
The library version was already updated in
commit 213af31e09 ("mempool: reduce structure size if no cache needed")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit removes the const qualifier for the mempool in
rte_mempool_walk() callback prototype.
Indeed, most functions that can be done on a mempool require a non-const
mempool pointer, except the dump and the audit. Therefore, the
mempool_walk() is more useful if the mempool pointer is not const.
This is required by next commit where the mellanox drivers use
rte_mempool_walk() to iterate the mempools, then rte_mempool_obj_iter()
to iterate the objects in each mempool.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
