Aligning the Wind River copyright notices to be consistent with the
other files which bare the Wind River copyright notice.
Fixes: 32113d352d ("doc: replace license text with SPDX tag in AVP guide")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Replacing full license text with SPDX tag.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
It is expected to update this PMD to be in line with Arm's crypto library.
Update the maintainership to refect the change.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As Alejandro is no longer with Netronome we appointed two new
maintainers for the Netronome PMD
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Let's try to check for discrepancies in coverity and bugzilla tags.
The contributing guide specifies that:
- for coverity issues, the tag is 'Coverity issue:'
- for bugzilla issues, the tag is 'Bugzilla ID:'
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Same idea than overriding PATH and PKG_CONFIG_PATH, it can be quite
useful to override compilation flags like CFLAGS, CPPFLAGS and LDFLAGS
for cross compilation or libraries that won't provide a pkg-config file.
Fixes: 2722367412 ("devtools: load target-specific compilation environment")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Build directories commonly have compiler in their names.
In order to filter build directories not starting with "build-"
(common with make), patterns for gcc and clang are added to .gitignore.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
This commit fixes a sporadic failure of the service_autotest
unit test, as seen in the DPDK CI. The failure occurs as the main test
thread did not wait on the service-thread to return, and allowing it
to read a flag before the service was able to write to it.
The fix changes the wait API call to specific the service-core ID,
and this waits for cores with both ROLE_RTE and ROLE_SERVICE.
The rte_eal_mp_wait_lcore() call does not (and should not) wait
for service cores, so must not be used to wait on service-cores.
Fixes: f038a81e1c ("service: add unit tests")
Cc: stable@dpdk.org
Reported-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When net/octeontx is connected to event/octeontx as an event Rx adapter,
PKI aka 'net/octeontx' can forward packets directly to SSO aka
'event/octeontx'.
When pumping traffic to PKI if flow control is disabled internal FIFOs
might be overrun causing partial l2 packets to be enqueued.
SSO receives <31:0> TAG tag calculated by PKI, in normal cases <31:28>
is always 0 which signifies RTE_EVENT_TYPE_ETHDEV. But in case of
partial received packets PKI sets the <31:0> TAG as 0xFFFFFFFF which
is an invalid event type.
Add a check to see if TAG is 0xFFFFFFFF and free the partial receive
packet.
Fixes: d0d6549860 ("net/octeontx: support event Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The legacy multi-packet write is the feature allowing to
put multiple packets into one transmitting descriptor,
this feature is supported by only NIC ConnectX-4LX.
The number of packets should be limited to provide
optimal size descriptor and better performance.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The legacy multi-packet write is the feature allowing to
put multiple packets into one transmitting descriptor,
this feature is supported by only NIC ConnectX-4LX.
The number of packets should be limited to provide
optimal size descriptor and better performance.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In extensive metadata mode the MARK copy table is engaged,
if the application creates the flow with zero MARK ID action:
flow create 1 ingress pattern eth / ... / end actions mark id 0 / .. end
And then destroys that, the traffic to the port stops. This happens
due to default flow for the copy table has the zero ID and is removed
with the application rule. The patch extends internal ID variable
to 64 bits and provide the UINT64_MAX ID for the copy table default
rule.
Fixes: dd3c774f6f ("net/mlx5: add metadata register copy table")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
A buffer overflow happens in testpmd with some drivers
since the queue arrays are limited to RTE_MAX_QUEUES_PER_PORT.
The advertised capabilities of mlx4, mlx5 and softnic
for the number of queues were the maximum number: UINT16_MAX.
They must be limited by the configured RTE_MAX_QUEUES_PER_PORT
that applications expect to be respected.
The limitation is applied at ethdev level (function rte_eth_dev_info_get),
in order to force the configured limit for all drivers.
Fixes: 14b53e27b3 ("ethdev: fix crash with multiprocess")
Cc: stable@dpdk.org
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Claim maintainership of examples/ptpclient/
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move cryptodev feature near other crypto features.
Group ethdev features together.
Sort drivers/net features with new PMDs first.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add some pointers to the releases notes on the changes to the abi policy,
the introduction of project-level ABI management and the deprecation of
library-level management.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: John McNamara <john.mcnamara@intel.com>
Some kernel modules use '-' in their name when registering through
`pci_register_driver` and the same name is populated in
'/sys/bus/pci/drivers/'.
But the kernel always populates modules names replacing '-' with '_'
in '/sys/module/'.
Example:
# ./usertools/dpdk-devbind.py -b octeontx2-nicpf 0002:03:00.0
Error: Driver 'octeontx2-nicpf' is not loaded.
# ls /sys/bus/pci/drivers/octeontx2-nicpf
bind module new_id remove_id uevent unbind
# ls /sys/module/octeontx2_nicpf/
drivers uevent version
The patch addresses it by always replacing '-' with '_' when looking in
'/sys/module/'
Signed-off-by: Phanendra Vukkisala <pvukkisala@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Try to start testpmd with two vdevs without hugepages.
This is a really basic check, but better than nothing.
Signed-off-by: David Marchand <david.marchand@redhat.com>
When set the GRE item, GRE key should follow after GRE header, or the
header gre_item pointer used by the key will be invalid.
Currently in the mlx5_flow_validate_item_gre_key() function, the header
gre_item pointer is access before checking if the key is after the
header or not. Once the key item is before the header, invalid gre_item
pointer access happens.
Move the gre_item pointer access after the GRE header check to avoid the
crash issue.
Fixes: a7a0365565 ("net/mlx5: match GRE key and present bits")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
GENEVE is available in tunnel offloads. Add it as the default support
option.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The header mlx5_glue.h includes rte_byteorder.h, which isn't
pulled by global_inc. This patch adds the missing include directory
and fixes the build error:
In file included from drivers/net/mlx5/mlx5_glue.c:31:
drivers/net/mlx5/mlx5_glue.h:12:10: fatal error:
rte_byteorder.h: No such file or directory
The build failure can be triggered with:
meson -Dibverbs_link=dlopen build && ninja -C build
Fixes: 400d985eb5 ("net/mlx5: add VLAN push/pop DR commands to glue")
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
ConnectX-4LX supports multiple packets within the single Tx
descriptor. This feature is named as "Legacy Multi-Packet Write"
and imposes a lot of limitations:
- no ACLs, it means no NIC Tx Flows are supported and Tx metadata
become meaningless
- the required minimal inline data must be zero
- no SR-IOV, it means no support in E-Switch configurations,
- no priority and dscp forcing
- no VLAN insertion
- no TSO
- all packets within MPW session must have the same size
This legacy MPW feature is mainly intended for test purposes.
To explicitly engage the feature on ConnectX-4LX the devargs
should be specified:
- txq_mpw_en=1
This feature was dropped in 19.08, this patch reverts it back.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
'close()' calls 'stop()' and 'stop()' cancels pthread without any check.
Calling 'stop()' & 'close()' sequentially tries to cancel pthread twice
which will cause a crash.
Adding a state check in 'stop()' before canceling the pthread to prevent
multiple stop.
Fixes: 696fbc7bb4 ("net/kni: remove resources when port is closed")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
When the last item in flow pattern includes "next protocol" field which
is relevant for RSS flow expansion, a new item is added to the pattern
according to the "next protocol" field. This field is called missed
field.
The missed field wrongly was not initialized what caused to some of the
flow item fields to contain garbage values.
As a result, the PMDs internal flow engine may crash.
For example, the spec value may include garbage pointer and to cause
crash.
Initialize the missed field with zeroes.
Fixes: fc2dd8dd49 ("ethdev: fix expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
It's possible that we fail to get the IOMMU group of ifcvf device, this
patch adds a check on the return value.
Coverity issue: 349894
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Commit in fixes line sets the DV (Direct Verbs) flow engine as default.
Newer versions of DV flow engine use the DR (Direct Rules) features.
DR is supported from RDMA Core library version rdma-core-24.0.
This cause failure to start port when using older rdma-core version,
without DR support.
This patch selects DV flow engine if rdma-core version is v24.0 or
higher. Verbs flow engine is selected otherwise.
Fixes: cd4569d2bf ("net/mlx5: change default flow engine to DV")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
loopback mode is not supported for VFs so returning error if
VF is being configured with loopback mode.
Fixes: 920717e4d8 ("net/octeontx2: add device start operation")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The link status got from link status register was not correct,
because register has been reset when ports reset.
After port reset, set the link status down.
Fixes: c431ec66c5 ("net/igb: support setting link up or down")
Cc: stable@dpdk.org
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The link status for 82599eb got from link status register was not
correct. Check the enable/disable flag of tx laser, set the link
status down if tx laser disabled. Then, we can get correct status.
But after port reset, tx laser register will be reset enable.
Link status will always be up. So set tx laser disable when port resets.
When hw->mac.autotry_restart is true, whether tx laser is disable or
enable, it will be set enable in ixgbe_flap_tx_laser_multispeed_fiber().
hw->mac.autotry_restart can be set true in both port init and port start.
Because we don't need this treatment before port starts, set
hw->mac.autotry_restart false when port init.
Fixes: 0408f47ba4 ("net/ixgbe: fix busy polling while fiber link update")
Cc: stable@dpdk.org
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Meaningless to judge the link state according to the memset'ed
link variable, this patch fixes this logical issue.
In addition, this patch changes the variable from link_check to link_up
according to its real meaning.
Fixes: 80ba61115e ("net/e1000: use link status helper functions")
Cc: stable@dpdk.org
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The offload flag was added, but the deprecation notice was not removed.
Fixes: 5d30897295 ("ethdev: add mbuf RSS update as an offload")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The functionality is added, but the deprecation notice is not
removed.
Fixes: 5d4813acda ("ethdev: add packet type range function")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In .tx_pkt_burst ops implementation function of hns3 PMD driver,
there is one check whether there are enough BDs in the TX queue.
If not, driver will stop sending the packets.
Currently in the 'for' process loop, the next_to_use member of
TX queue is not updated in time after processing BDs of one packet,
which results in the invalid action of checking whether there are
enough BDs and failure in sending packets.
This patch fixes it by moving the assignment statment of the
next_to_use member of TX queue to the place after porcessing TX BDs
in the 'for' loop.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
- Add note for sharing an adapter between DPDK and Linux drivers.
- Update the firmware version in example.
- Add Config note for potential error due to lack of memzone descriptor
count.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Enable packet type parsing by default, only disable when
`rte_eth_dev_set_ptypes()` is called with ptype_mask as 0.
This would enable applications that are dependent on packet type parsing
like l3fwd.
Also this patch preserves configuration set by `rte_eth_dev_set_ptypes`
across multiple calls of `rte_eth_dev_configure()`
Fixes: d2706e15e6 ("net/octeontx2: support reduced set of packet types")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The metadata register used for META item/action within E-Switch
steering domain should be altered depending on dv_xmeta_en
devarg value.
Fixes: 3e8edd0ef8 ("net/mlx5: update metadata register ID query")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For tunnel mode, there may be two L3/L4 layer match pattern items, one
for inner and one for outer layers. The L3 TTL and L4 port header
modify actions should handle the outermost layer items.
Currently flow_dv_attr_init() doesn't distinguish between outer and
inner layers, since inner layer comes later than the outer layer, this
may cause inner layer values also set to the flow attributes and may
lead actions to use inner L3/L4 pattern items.
Adding a check in flow_dv_attr_init() to prevent inner layer to set the
flow attribute if the previous L3/L4 outer pattern exist.
Fixes: 4bb14c83df ("net/mlx5: support modify header using Direct Verbs")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When setting vlan, hns3 driver will add vlan entry to vlan linked list
each time, and this is unreasonable.
This patch adds a check whether the VLAN to be added already exists
in the linked list and prevents adding duplicated vlan.
Fixes: 411d23b9ea ("net/hns3: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
