Add new vDPA PMD to support vDPA operations of Xilinx devices.
This patch implements probe and remove functions.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Set the RTE_EVENT_DEV_CAP_REQUIRES_MAINT flag, and perform DSW
background tasks on rte_event_maintain() calls.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Tested-by: Richard Eklycke <richard.eklycke@ericsson.com>
Tested-by: Liron Himi <lironh@marvell.com>
This patch adds new api ``rte_event_eth_rx_adapter_queue_stats_get`` to
retrieve queue stats. The queue stats are in the format
``struct rte_event_eth_rx_adapter_queue_stats``.
For resetting the queue stats,
``rte_event_eth_rx_adapter_queue_stats_reset`` api is added.
The adapter stats_get and stats_reset apis are also updated to
handle queue level event buffer use case.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Added table to the crypto device drivers documentation
stating the support of each PMD on Linux, FreeBSD and Windows.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add 1MB data-unit length to the capability's bitmap.
Handle 1MB data-unit length in the mlx5 session create operation,
and expose its capability in the mlx5 capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Adds event vector support to inline protocol offload mode.
By default vector support is disabled, it can be enabled by
using the option --event-vector.
Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector-size and
--vector-tmo.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
New option added to the SA configuration arguments that
allows setting an arbitrary start value for ESN.
For example in the SA below ESN will be enabled and first egress
IPsec packet will have the ESN value 10000:
sa out 15 cipher_algo null auth_algo null mode ipv4-tunnel \
src 172.16.1.5 dst 172.16.2.5 \
esn 10000
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add telemetry support to the IPsec GW sample app and add
support for per SA telemetry when using IPsec library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Enable UDP encapsulation for both transport and tunnel modes for the
inline crypto offload path.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add null auth support with lookaside IPsec on cn10k crypto PMDs.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support to allow user to specific MSS for TCP TSO offload on a per SA
basis. MSS configuration in the context of IPsec is only supported for
outbound SA's in the context of an inline IPsec Crypto offload.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for transmit segmentation offload to inline crypto processing
mode. This offload is not supported by other offload modes, as at a
minimum it requires inline crypto for IPsec to be supported on the
network interface.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Currently, the compression block size is 15 by default, which
is the maximum.
Add "log-block-size" devarg to select compression block size manually.
The value provided should be between 4 to 15.
Any out-of-range value will be defaulted to 15.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add support for mlx5 crypto pmd on Windows OS.
Add changes to release note and PMD guide.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The cryptodev library now registers commands with telemetry, and
implements the corresponding callback functions. These commands
allow a list of cryptodevs to be queried, as well as info and stats
for the corresponding cryptodev.
An example usage can be seen below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 21.11.0-rc0", "pid": 1135019, "max_output_len": 16384}
--> /
{"/": ["/", "/cryptodev/info", "/cryptodev/list", "/cryptodev/stats", ...]}
--> /cryptodev/list
{"/cryptodev/list": [0,1,2,3]}
--> /cryptodev/info,0
{"/cryptodev/info": {"device_name": "0000:1c:01.0_qat_sym", \
"max_nb_queue_pairs": 2}}
--> /cryptodev/stats,0
{"/cryptodev/stats": {"enqueued_count": 0, "dequeued_count": 0, \
"enqueue_err_count": 0, "dequeue_err_count": 0}}
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Deprecation notice targeted for 21.11 has been committed with
following as the first commit of the series.
Fixes: b7c9842916 ("interrupts: add allocator and accessors")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
MAE counters can be polled from a control thread if no service core is
allocated for this.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Flex item or flex parser is port infrastructure that allows
application to add support for a custom network header and
offload flows to match the header elements.
Flex item API adds FLEX flow item to RTE flows.
Fixes: dc4d860e8a ("ethdev: introduce configurable flexible item")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the device and vendor numbers to the PCI ID map so
that a VF can be probed.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The GTP, GTP-U, GTP-C header fields can be matched, however NIC does not
support GTP tunneling so no items after the GTP header can be specified.
If a GTP-U or GTP-C item is specified without a preceding UDP item, the
UDP destination port is implicitly matched. For GTP, the destination UDP
port must be specified but its value is not enforced.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Enable protocol agnostic flow offloading to support raw pattern input
for RSS hash flow rule creation. It is based on Parser Library feature.
Current rte_flow raw API is utilized.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add BPHY to the list of platform hardware accelerator blocks.
Fixes: 3d27e49e07 ("raw/cnxk_bphy: add BPHY CGX/RPM skeleton driver")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Device naming might be misleading which is especially true if one takes
it from lspci output. In order to keep naming consistent keep leading
zero in front of pci bus number.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As previously announced, this patch renames struct
vhost_device_ops to struct rte_vhost_device_ops.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Ten vhost APIs were announced to be stable and promoted in below
commit, so remove the related deprecation notice.
Fixes: 945ef8a040 ("vhost: promote some APIs to stable")
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch marks the vDPA driver APIs as internal and
rename the corresponding header file to vdpa_driver.h.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Protocol agnostic flow offloading in Flow Director is enabled by this
patch based on the Parser Library, using existing rte_flow raw API.
Note that the raw flow requires:
1. byte string of raw target packet bits.
2. byte string of mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Also update the ice feature list with rte_flow item raw.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT.
The former should be used instead of ambiguous PORT_ID.
The latter sends traffic to the entity represented by
the given ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for item REPRESENTED_PORT to match on traffic entering
the embedded switch from the entity represented by the given
ethdev (network port or VF).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
rte_flow_action_handle_create() did not mention what happens
with an indirect action when a device is stopped and started again.
It is natural for some indirect actions, like counter, to be persistent.
Keeping others at least saves application time and complexity.
However, not all PMDs can support it, or the support may be limited
by particular action kinds, that is, combinations of action type
and the value of the transfer bit in its configuration.
Add a device capability to indicate if at least some indirect actions
are kept across the above sequence. Without this capability the behavior
is still unspecified, and application is required to destroy
the indirect actions before stopping the device.
In the future, indirect actions may not be the only type of objects
shared between flow rules. The capability bit intends to cover all
possible types of such objects, hence its name.
Declare that the application can test for the persistence
of a particular indirect action kind by attempting to create
an indirect action of that kind when the device is stopped
and checking for the specific error type.
This is logical because if the PMD can to create an indirect action
when the device is not started and use it after the start happens,
it is natural that it can move its internal flow shared object
to the same state when the device is stopped and restore the state
when the device is started.
Indirect action persistence across a reconfigurations is not required.
In case a PMD cannot keep the indirect actions across reconfiguration,
it is allowed just to report an error.
Application must then flush the indirect actions before attempting it.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Previously, it was not specified what happens to the flow rules
when the device is stopped, possibly reconfigured, then started.
If flow rules were kept, it could be convenient for application
developers, because they wouldn't need to save and restore them.
However, due to the number of flows and possible creation rate it is
impractical to save all flow rules in DPDK layer. This means that flow
rules persistence really depends on whether PMD and HW can implement it
efficiently. It can also be limited by the rule item and action types,
and its attributes transfer bit (a combination of an item/action type
and a value of the transfer bit is called a rule feature).
Add a device capability bit for PMDs that can keep at least some
of the flow rules across restart. Without this capability behavior
is still unspecified and it is declared that the application must
flush the rules before stopping the device.
Allow the application to test for persistence of rules using
a particular feature by attempting to create a flow rule
using that feature when the device is stopped
and checking for the specific error.
This is logical because if the PMD can to create the flow rule
when the device is not started and use it after the start happens,
it is natural that it can move its internal flow rule object
to the same state when the device is stopped and restore the state
when the device is started.
Rule persistence across a reconfigurations is not required,
because tracking all the rules and configuration-dependent resources
they use may be infeasible. In case a PMD cannot keep the rules
across reconfiguration, it is allowed just to report an error.
Application must then flush the rules before attempting it.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
A meter policy with RSS/Queue action is not supported
when dv_xmeta_en enabled.
When dv_xmeta_en enabled in legacy creating flow,
it will split into two flows
(one set_tag with jump flow and one RSS/queue action flow).
For meter policy as termination table,
it cannot split flow and
cannot support when dv_xmeta_en enabled.
Fixes: 51ec04dc7b ("net/mlx5: connect meter policy to created flows")
Cc: stable@dpdk.org
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
