This patch add some debug information when using link bonding mode 6.
It prints basic information about ARP packets on RX and TX (MAC, ip,
packet number, arp packet type).
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB == y.
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1 is enabled instead of previous
one, use show command to see IPv4 balancing from clients.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
x32 ABI provides benefits of x86-64 while using 32-bit pointers and
avoiding overhead of 64-bit pointers.
Test report: http://dpdk.org/ml/archives/dev/2015-February/012599.html
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Tested-by: Haifeng Tang <haifengx.tang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This library provides reordering capability for out of order mbufs based
on a sequence number in the mbuf structure.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Richardson Bruce <bruce.richardson@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
1. Add init function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
fm10k_stats_get.
4. Add fm10k.h to define macros and basic data structure.
5. Add fm10k_logs.h to control log message output.
6. Change config/common_bsdapp and config/common_linuxapp, add
macros to control fm10k pmd driver compile for linux and bsd.
7. Add Makefile.
8. Change lib/Makefile to add fm10k driver into compile list.
9. Change mk/rte.app.mk to add fm10k lib into link.
10. Add ABI version of librte_pmd_fm10k
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
This is a duplication of some EAL parts for a standalone packaging
which is not documented.
Packaging should be done outside of DPDK.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This allows the PMD to compile with kernels that don't support the
options in question. The "#if defined(...)" lines are a bit ugly,
but I don't know of any better way to accomplish the task.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
There is no standard to check endianness.
So we need to try different checks.
Previous trials were done in testpmd (see commits
51f694dd40 and 64741f237c) without full success.
This one is not guaranteed to work everywhere so it could
evolve when exceptions are found.
If endianness is not detected, there is a fallback on x86
to little endian. It could be forced before doing detection
but it would add some arch-dependent code in the generic header.
The option CONFIG_RTE_ARCH_BIG_ENDIAN introduced for IBM Power only
(commit a982ec81d8) can be removed. A compile-time check is better.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
enic driver is giving trouble because of non-standard types :
CC enic_res.o
In file included from
lib/librte_pmd_enic/enic_res.c:36:0:
lib/librte_pmd_enic/enic_compat.h:92:1: error: unknown type name ‘u_int32_t’
static inline u_int32_t ioread32(volatile void *addr)
^
Disable it on Power for now.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: enable for BSD - not tested]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The mmap of hugepage files on IBM Power starts from high address to low
address. This is different from x86. This patch modified the memory
segment detection code to get the correct memory segment layout on Power
architecture. This patch also added a commond ARCH_PPC_64 definition for
64 bit systems.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch adds architecture specific byte order operations for IBM Power
architecture. Power architecture support both big endian and little
endian. This patch also adds a RTE_ARCH_BIG_ENDIAN micro.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
To make DPDK run on IBM Power architecture, configuration files for
Power architecuture are added. Also, the compiling related .mk files are
added.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
New platforms have more than 64 cores.
Set default max cores number to 128.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is a Linux-specific virtual PMD driver backed by an AF_PACKET
socket. This implementation uses mmap'ed ring buffers to limit copying
and user/kernel transitions. The PACKET_FANOUT_HASH behavior of
AF_PACKET is used for frame reception. In the current implementation,
Tx and Rx queues are always paired, and therefore are always equal
in number -- changing this would be a Simple Matter Of Programming.
Interfaces of this type are created with a command line option like
"--vdev=eth_af_packet0,iface=...". There are a number of options available
as arguments:
- Interface is chosen by "iface" (required)
- Number of queue pairs set by "qpairs" (optional, default: 1)
- AF_PACKET MMAP block size set by "blocksz" (optional, default: 4096)
- AF_PACKET MMAP frame size set by "framesz" (optional, default: 2048)
- AF_PACKET MMAP frame count set by "framecnt" (optional, default: 512)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[Thomas: disable because of incompatibility with some kernels]
Remove 'CONFIG_RTE_LIBRTE_I40E_PF_DISABLE_STRIP_CRC'
from config files, as nowhere uses it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The change includes several parts:
1. Get maximum number of VMDQ pools supported in dev_init.
2. Fill VMDQ info in i40e_dev_info_get.
3. Setup VMDQ pools in i40e_dev_configure.
4. i40e_vsi_setup change to support creation of VMDQ VSI.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
vhost lib is turned off by default.
vhost lib is based on cuse, which requires fuse development package
to be installed.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: fix build dependencies]
No need to restrict usage of non Intel SFP.
If (hw->phy.type == ixgbe_phy_sfp_intel) is false,
a warning will be logged.
It was disabled for ixgbe and enabled but unused for i40e.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The vector PMD expects fields to be in a specific order so that it can
do vector operations on multiple fields at a time. Following mbuf
rework, adjust driver to take account of the new layout and re-enable it
in the config.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Remove useless include that broke compilation and
allow to use it with nic_uio in FreeBSD.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Alan Carew <alan.carew@intel.com>
Add compilation support for clang on Linux and FreeBSD.
clang is the default compiler on FreeBSD 10.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
[Thomas: update comments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Comments to help on basic configuration are already located
in common configs.
No need to duplicate (and maintain) them in inherited configurations.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a special case to the native target makefile, where we check if
-march=native shows SSE4.2 support. If it does not, then not everything may
build, so we check if the hardware supports SSE4.2, and use a corei7 target
explicitly to get the SSE4.2 support.
Then ACL library, which requires SSE4.2, can be re-enabled for FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add some missing options (disabled) and disable i40e debug.
Reported-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Using gcc 4.8 on FreeBSD 10, support for SSE4.x is not detected by
the compiler, meaning that the ACL library, which depends on SSE4.2
cannot compile. Disable this library for the native target allows
compiles to succeed on FreeBSD 10 using gcc.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
RTE_IXGBE_RX_OLFLAGS_ENABLE gives a hint whick keeping packet type
in RX ol_flags or not.
By default it is set to update ol_flags in RX mbuf header.
If unset it, will gain addtional performance, but will lose packet
type information.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Enabling 'Extended Tag' and resetting 'Max Read Request Size' in PCI
config space have big impacts to i40e performance. They cannot be
changed on some BIOS implementations, though can on others. Two sys
files of 'extended_tag' and 'max_read_request_size' are added to
support changing them by 'echo' in user space.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
This library provides a tool to interpret config files that have
standard structure.
It is used by the Packet Framework examples/ip_pipeline sample application.
It originates from examples/qos_sched sample application and now it makes
this code available as a library for other sample applications to use.
The code duplication with qos_sched sample app to be addressed later.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The Packet Framework pipeline library provides a standard methodology
(logically similar to OpenFlow) for rapid development of complex packet
processing pipelines out of ports, tables and actions.
A pipeline is constructed by connecting its input ports to its output ports
through a chain of lookup tables. As result of lookup operation into the
current table, one of the table entries (or the default table entry, in case
of lookup miss) is identified to provide the actions to be executed on the
current packet and the associated action meta-data.
The behavior of user actions is defined through the configurable table action
handler, while the reserved actions define the next hop for the current packet
(either another table, an output port or packet drop) and are handled
transparently by the framework.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the operations to be implemented by
any Packet Framework table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the port operations that have to be implemented
by Packet Framework ports.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Add VFIO compilation option to linuxapp config.
Adding a header that will determine if VFIO support should be compiled
in. If VFIO is enabled in config (and it's enabled by default), then the
header will also check for kernel version. If VFIO is enabled in config
and if the kernel version is 3.6+, then VFIO_PRESENT will be defined.
This is the macro that should be used to determine if VFIO support is
being compiled in.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Currently, igb_uio is always compiled. Some Linux distributions may not
want to include igb_uio with DPDK, so we need to make sure that igb_uio
compilation for Linuxapp targets can be optional.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
New file containing optimized receive and transmit functions which
use 128bit vector instructions to improve performance. When conditions
permit, these functions will be enabled at runtime by the device
initialization routines already in the PMD.
The compilation of the vectorized RX and TX code paths is controlled by
a new setting in the build time configuration for the IXGBE driver. Also
added is a setting which allows an optional further performance increase
by disabling the use of the olflags field on packet RX.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: XiaonanX Zhang <xiaonanx.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: code-style adjustments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The ACL library is used to perform an N-tuple search over a set of rules with
multiple categories and find the best match for each category.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
This adds the code for a new Intel DPDK library for packet distribution.
The distributor is a component which is designed to pass packets
one-at-a-time to workers, with dynamic load balancing. Using the RSS
field in the mbuf as a tag, the distributor tracks what packet tag is
being processed by what worker and then ensures that no two packets with
the same tag are in-flight simultaneously. Once a tag is not in-flight,
then the next packet with that tag will be sent to the next available
core.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: add doxygen @file comment]
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
linux and bsd default configurations now have their own default common
configuration files.
Specific options are then set in the specific files.
This makes it easier to globally enable/disable some features in DPDK for
multiple targets.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
