Add support for building MRVL MVPP2 PMD with meson. To avoid cluttering
the build environment and to keep all relevant settings local to a cross
build we get MUSDK library installation path from a meson option.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the version file to follow standard naming convention.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Meson build currently tracks the dependencies between libraries, which
can often make things easier, but has the side-effect of slowing down
the initial meson run if too many duplicated dependencies are provided.
Therefore, we remove dependencies from the dpaa items where other
dependencies already depend on those. This provides a noticable speed-up
in meson configuration runs when lots of sample apps are included in the
build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The new functions for Rx and Tx offloads should not be inside the
conditional block for the vector driver, otherwise compile errors occur
when vector driver is disabled. For example:
ixgbe_ethdev.c:3636:36: error:
implicit declaration of function ‘ixgbe_get_rx_queue_offloads’;
This shows up as an error when doing ARM builds using meson as the vector
driver is not (yet) enabled for those builds.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Fixes: ec3b1124d1 ("net/ixgbe: convert to new Rx offloads API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
dev_info->max_event_ports is uint8_t. dpaa_event_dev_info_get assigns
DPAA_EVENT_MAX_EVENT_PORT (which is RTE_MAX_LCORE, upto 256 in ppc64le)
into this variable, which breaks compile in ppc64le.
drivers/event/dpaa/dpaa_eventdev.c: In function ‘dpaa_event_dev_info_get’:
rte_config.h:23:23: error:
large integer implicitly truncated to unsigned type [-Werror=overflow]
#define RTE_MAX_LCORE 256
Fixes: 9caac5dd1e ("event/dpaa: introduce PMD")
Cc: stable@dpdk.org
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Add compile-time configurable option to force TIMvf to use Octeontx
FPAvf pool manager as its chunk pool.
When FPAvf is used as pool manager the TIMvf automatically frees the
chunks to FPAvf through gpool-id.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
When application sets `RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES` flag
while creating adapter underlying driver is free to optimize the
resolution for best possible configuration.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When application creates the timer adapter by passing
`RTE_EVENT_TIMER_ADAPTER_F_SP_PUT` flag, we can optimize the arm sequence
by removing the locking overhead.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
When application requests to start the timer adapter through
`rte_event_timer_adapter_start`, Octeontx TIMvf ring does the
following:
- Uses mbox to communicate TIMpf driver about,
* SCLK frequency used to convert ns<->cycles.
* program the ring control parameters and start the ring.
* get the exact cycle at which the TIMvf ring has started which can be
used to estimate the bucket position.
On `rte_event_timer_adapter_stop` i.e stop, Octeontx TIMvf ring does the
following:
- Use mbox to communicate TIMpf driver about,
* reset the ring control parameters and stop the ring.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
When the application requests to create a timer device, Octeontx TIM
create does the following:
- Get the requested TIMvf ring based on adapter_id.
- Verify the config parameters supplied.
- Allocate memory required for
* Buckets based on min and max timeout supplied.
* Allocate the chunk pool based on the number of timers.
- Clear the interrupts.
On Free:
- Free the allocated bucket and chunk memory.
- Free private data used by TIMvf.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
On Octeontx HW, each event timer device is enumerated as separate SRIOV VF
PCIe device.
In order to expose as a event timer device:
On PCIe probe, the driver stores the information associated with the
PCIe device and later when application requests for a event timer device
through `rte_event_timer_adapter_create` the driver infrastructure creates
the timer adapter with earlier probed PCIe VF devices.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds the logic that is shared by all event timer adapter
drivers; the common code handles instance allocation and some
initialization.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Add support for stop flush callback along with unit test.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
When an event device is stopped, it drains all event queues and ports.
These events may contain pointers, so to prevent memory leaks eventdev now
supports a user-provided flush callback that is called during the queue
drain process. This callback is stored in process memory, so the callback
must be registered by any process that may call rte_event_dev_stop().
This commit also clarifies the behavior of rte_event_dev_stop().
This follows this mailing list discussion:
http://dpdk.org/ml/archives/dev/2018-January/087484.html
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
If application link one atomic queue to multiple ports,
and each worker core update flow_id, there will have a
chance to hit race condition issue and lead to double processing
same event. This fix solve the problem and eliminate
the race condition issue.
Fixes: 4236ce9bf5 ("event/opdl: add OPDL ring infrastructure library")
Cc: stable@dpdk.org
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Previously, the sw PMD would enqueue either all or no events, depending on
if enough inflight credits were available for the new events in the burst.
If a port is enqueueing a large burst (i.e. a multiple of the credit update
quanta), this can result in suboptimal performance, and requires an
understanding of the sw PMD implementation (in particular, its credit
scheme) to tune an application's burst size.
This affects software that enqueues large bursts of new events, such as the
ethernet event adapter which uses a 128-deep event buffer, when the input
packet rate is sufficiently high.
This change makes the sw PMD enqueue as many events as it has credits, if
there are any new events in the burst.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Counter variable 'out_pkts' had been set to 0, then updated. Current
code change elimates double assignment to direct assignment.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
variables 'out_pkts_total' and 'out_pkts_total' will be in registers.
Hence shifting the code after the loop, helps the update from registers.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
For most run cases 'sw->started' holds true. Adding a branch prediction
suggestion to compiler helps as this is first conditional check just
after entering the function.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
This counter comes from a "hardware" register of the vmxnet3 device and
seems to behave like the MPC (Missed Packet Count) register of the Intel
NICs. So I think this data belongs in the imissed field rather than the
rx_nombuf field.
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Acked-by: Yong Wang <yongwang@vmware.com>
With icc (ICC) 18.0.1 20171018, -wd usage generates following warning:
icc: command line remark #10010: option '-wd3656' is deprecated and will
be removed in a future release. See '-help deprecated'
"icc -help deprecated" output is:
-wd use -diag-disable
Based on above information "-wd" converted to "-diag-disable"
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When creating bond device with mode6, dpdk will create
mempool for arp packets. If free the bond device and
create it with same name, there will be an error. Because
the mempool is not freed when destroying bond device.
Fixes: 06fe78b98c ("bond: add mode 6")
Fixes: ea0c20ea95 ("apps: use helper to create mbuf pools")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In some cases we want vhost dequeue work in interrupt mode to
release cpus to others when no data to transmit. So we install
interrupt handler of vhost device and interrupt vectors for each
rx queue when creating new backend according to vhost interrupt
configuration. Thus, applications could register a epoll event fd
to associate rx queues with interrupt vectors.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
This patch adds support for new NIC NFB-200G2QL.
At the probing stage numa nodes for the DMA queues are identified
and the appropriate number of ports is allocated.
DMA queues residing on the same numa node are grouped in the same
port.
Signed-off-by: Matej Vido <vido@cesnet.cz>
NFB cards employ multiple Ethernet ports.
Until now, Ethernet port-related operations were performed on all of them
(since the whole card was represented as a single port).
With new NFB-200G2QL card, this is no longer viable.
Since there is no fixed mapping between the queues and Ethernet ports,
and since a single card can be represented as two ports in DPDK,
there is no way of telling which (if any) physical ports should be
associated with individual ports in DPDK.
This is also described in documentation in more detail.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Signed-off-by: Jan Remes <remes@netcope.com>
Chained metadata instead of prepend metadata was added in
firmware version 4. However, it could be old firmwares evolving
but not supporting chained metadata.
This patch adds support for an old firmware being updated and
getting a firmware version number higher than 4, but it still not
implementing chained metadata.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This new LSO offload version facilitates how firmware implements
this functionality and helps improving the performance.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
All FEC modes are supported and allowed, but none are explicitly
requested.
This effectively means that FEC mode is determined solely form cable
requirements and link partner capabilities / requirements.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
There is a specific function to set error for flow configuration,
so change to use that function.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add comment for flow rss parse function in order
to explain some important info. This patch also delete some
useless code for queue index check for RSS queue region
configuration.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero which makes *allow_queuing* always zero until dev_start
get called again. Actually, we should not determine queues existence by
*dev_attached* but by queues pointers or other separated variable(s).
Fixes: 30a701a537 ("net/vhost: fix crash when creating vdev dynamically")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This lets the vhost driver handle the VLAN header like the virtio driver
in software.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Following commit 7ba5320baa ("net/mlx5: fix link status behavior")
The initial link status is no longer set as part of the port start.
When LSC interrupts are enabled, ethdev layer reads the link status
directly from the device data instead of using the PMD callback.
This may cause application to query the link as down while in fact it was
already up before the DPDK application start (and no interrupt to fix
it).
Fixes: 7ba5320baa ("net/mlx5: fix link status behavior")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Previous to this commit mlx4 CRC stripping was executed by default and
there was no verbs API to disable it.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds support for explicitly selecting 2.5G and 5G speeds on
X550.
Signed-off-by: Martin Weiser <martin.weiser@allegro-packets.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Customized info will be updated when processing DDP package,
including PCYPE/PTYPE/protocol. Previously, the customized info
is updated without any check for package operation - ADD or DEL,
but only covers ADD operation. In this situation, even if a package
is being removed, new PCTYPE/PTYPE/protocol will still be created,
it will cause wrong parsing for SW. This patch cleans new
PCTYPE/PTYPE/protocol created when a package is being removed.
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In a container environment if the vhost-user backend restarts, there's
no way for it to reconnect to virtio-user. To address this, support for
server mode is added. In this mode the socket file is created by virtio-
user, which the backend then connects to. This means that if the backend
restarts, it can reconnect to virtio-user and continue communications.
With current implementation, LSC is enabled at virtio-user side to
support to accept the coming connection.
Server mode virtio-user only supports to work with vhost-user.
Release note is updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows individual PMDs to specify preferred parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows individual PMDs to specify preferred parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
All loopback modes are listed in efx_loopback_type_t.
Available loopback modes are listed per link speed in
the enc_loopback_types member of the efx_nic_cfg_t.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Loopback type used as bit index has efx_loopback_type_t type
which is enum. clang complains that it is always true when it
is compared with qword (64 bit) bits number boundary.
Fixes: 9ee64bd404 ("net/sfc/base: import loopback control")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Ethdev RX offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This patch makes use of DEV_RX_OFFLOAD_JUMBO_FRAME offload flag
to advertise jumbo frame support.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Add packet pacing support for PFs.
ecore client can request for enabling packet pacing at init time,
if requested then ecore is going to skip MCoS and SRIOV configurations.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This fix allows driver to program NIC configuration to support OVLAN
mode in multi-function scenario
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add SPQ timeout base driver parameter support management FW timeout values
other than default and none. Have fallback mechanism for old MFWs.
Reduce the default timeout to 1 sec.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add new API ecore_chain_set_cons() and fix page index setting in
ecore_chain_set_prod(). The new API is for future use.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The changes included in this patch are for
- formatting
- comment rework/additions
- relocate FW info, version related code
- convert:
__le16 to u16
__le32 to u32 etc.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch adds changes to support new firmware 8.33.12.0. The changes
consist of FW bug fixes and enhancements.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
If Rx descriptors are not available, pkts are dropped by default.
Fix rx_drop_en setting in bnxt_dev_info_get_op to reflect it.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
All Netlink request the PMD will do can also be done by a iproute2 command
line interface, enabling VF behavior configuration without having to modify
the application nor reaching PMD limits (e.g. MAC address number limit).
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VF devices are not able to receive promisc or allmulti traffic unless it
fully requests it though Netlink. This will cause the request to be
processed by the PF which will handle the request and enable it.
This requires the VF to be trusted by the PF.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VF devices are not able to receive traffic unless it fully requests it
though Netlink. This will cause the request to be processed by the PF
which will add/remove the MAC address to the VF table if the VF is trusted.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
dev->data->eth_link isn't updated until the first interrupt. If a
link is carrier down, then this interrupt may never happen. Before we
finished starting the PMD, call ixgbe_dev_link_update() to ensure we
have a valid status.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If we haven't set wait_to_complete, there is no need to busy wait
until we have a link status. Applications, like bonding, use the
wait_to_complete flag to indicate that they will be doing their own
busy wait and will likely be polling again shortly.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
There need a queue index check for RSS queue region
in order to aviod error from configuration.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Based on the equivalent code in the igb driver.
Signed-off-by: Chas Williams <chas3@att.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
If running FW variant supports subvariant without checksumming
on transmit and all transmit queues do not use checksumming,
it may be disabled.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If DPDK application or OS does not need checksumming on transmit,
it may be disabled in firmware to achieve higher packet rates.
Choice must be done before VIS allocation and is allowed if
no other non-preboot and firmware subvariant-unaware drivers are
attached.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
FW subvariants allow to tweak NIC global features. For example,
if no drivers require checksumming on transmit, it may be disabled
in FW to increase packet rate.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
The change adds functional TUN PMD logic to the existing TAP PMD.
TUN PMD can be initialized with 'net_tunX' where 'X' represents unique id.
PMD supports argument interface, while MAC address and remote are not
supported.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
1330 and 1400 series adapters support the drop action. Check for its
availability and set the necessary flag when creating NIC filters.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The enic code called from rte_eth_dev_set_mtu() was assuming that the
Rx queues are already set up via a call to rte_eth_tx_queue_setup().
OVS calls rte_eth_dev_set_mtu() before rte_eth_rx_queue_setup() and
a null pointer was dereferenced.
Fixes: c3e09182bc ("net/enic: support scatter Rx in MTU update")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Recent models support IPv4/IPv6 UDP RSS. There is no control bit to
enable UDP RSS alone. Instead, the NIC enables/disables TCP and UDP
RSS together.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The firmware on new hardware models flushes the global descriptor
cache by default. Use CMD_OPENF_IG_DESCCACHE to avoid cache
flushing. This flag has no effect on older models.
Suggested-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Supported scalar implementation for RX data path.
Supported scalar and vector implementation for TX data path.
Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>
Fix incorrect sizeof operation being used for getting mac addr size.
Found while compiling with arm64 clang.
drivers/net/tap/rte_eth_tap.c:1410:40: error: argument to 'sizeof' in
'memcpy' call is the same pointer type 'struct ether_addr *' as the
destination; expected 'struct ether_addr' or an explicit length
[-Werror,-Wsizeof-pointer-memaccess]
rte_memcpy(&pmd->eth_addr, mac_addr, sizeof(mac_addr));
~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
Fixes: bcab6c1d27 ("net/tap: allow user MAC to be passed as args")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
In next 18.05 the old hw offload API will be removed. This patch adds
support for just the new hw offload API.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PF PMD support was based on NSPU interface. This patch changes the
PMD for using the new CPP user space interface which gives more
flexibility for adding new functionalities.
This change just affects initialization with the datapath being the
same than before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
CPP refers to the internal NFP Command Push Pull bus. This patch allows
to create CPP commands from user space allowing to access any single
part of the chip.
This CPP interface is the base for having other functionalities like
mutexes when accessing specific chip components, chip resources management,
firmware upload or using the NSP, an embedded arm processor which can
perform tasks on demand.
NSP was the previous only way for doing things in the chip by the PMD,
where a NSPU interface was used for commands like firmware upload or
port link configuration. CPP interface supersedes NSPU, but it is still
possible to use NSP through CPP.
CPP interface adds a great flexibility for doing things like extended
stats or firmware debugging.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
For fscanf() function SCN macros should be used but PRI macros were
wrongly used.
Also use correct sizes of variables for read values.
Fixes: 83556fd2c0 ("szedata2: change to physical device type")
Cc: stable@dpdk.org
Signed-off-by: Matej Vido <vido@cesnet.cz>
Previously the queues were the part of private data structure of the
Ethernet device.
Now the queues are allocated at setup thus numa-aware allocation is
possible.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Counters from all queues have to be summed up for total stats
even though the number of queue stats counters is not sufficient.
Fixes: 83556fd2c0 ("szedata2: change to physical device type")
Cc: stable@dpdk.org
Signed-off-by: Matej Vido <vido@cesnet.cz>
There are several error paths where the bonding device may not start.
Clear dev_started before we return if we take one of these paths.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
The pos returned is just the offset of the slab. You need to use this
to offset the bits in the slab.
Fixes: c771e4ef38 ("net/bonding: enable slave VLAN filter")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
This is fix for Coverity Defect 268319 about uninitialized speed
in an error case. Also drop unnecessary assignment.
Coverity issue: 268319
Fixes: 4fac7c0a14 ("net/octeontx: add link update")
CC: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Update to new Rx/Tx offload API. Always set CRC stripping during
configuration, since it can't be disabled.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Offload API is currently used only to setup correct receive function
for scattered packets.
Use offloads member instead of bitfield and advertise correct
capabilities.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Update the license header on bnxt files to be the standard
BSD-3-Clause license used for the rest of DPDK,
bring the files in compliance with the DPDK licensing policy.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Use the new Rx/Tx offload APIs and remove the old style offloads.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
In Enhanced Multi-Packet Send (eMPW), entire packet data is prefetched to
LLC if it isn't inlined. Even though this helps reducing jitter when HW
fetches data by DMA, this can thresh the LLC with evicting precious data.
And if the size of queue is large and there are many queues, this might not
be effective. Also, if application runs on a remote node from the PCIe
link, it may not be helpful and can even cause bad results.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
According to CQE format:
- l4_hdr_type:
0 - None
1 - TCP header was present in the packet
2 - UDP header was present in the packet
3 - TCP header was present in the packet with Empty
TCP ACK indication. (TCP packet <ACK> flag is set,
and packet carries no data)
4 - TCP header was present in the packet with TCP ACK indication.
(TCP packet <ACK> flag is set, and packet carries data).
A packet should be identified as TCP packet if l4_hdr_type is 1, 3 or 4.
Add corresponding idx of TCP ACK to ptype table.
previous discussion:
https://www.mail-archive.com/users@dpdk.org/msg02980.html
Signed-off-by: Bin Huang <bin.huang@hxt-semitech.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When linking the mlx glue code libraries using CC, the linker arguments in
LDFLAGS are not prefixed with -Wl. [The EXTRA_LDFLAGS are though.] This
leads to warning messages on build:
clang-5.0: warning: argument unused during compilation: '-e xport-dynamic'
Fix this by checking for $LINK_USING_CC in the Makefiles and prefixing the
LDFLAGS appropriately if set.
Fixes: 27cea11686 ("net/mlx4: spawn rdma-core dependency plug-in")
Fixes: 59b91bec12 ("net/mlx5: spawn rdma-core dependency plug-in")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Vlan tci configuration from testpmd is stored in big endian, changing
it to little endian is needed before using it.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in VF. With this patch
it can be enabled or disabled on any Rx queue in VF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in PF. With this patch
it can be enabled or disabled on any Rx queue in PF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Rx and Tx offloads API.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Rx and Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
virtio-user port_id range should be increased from 8 bits to 16 bits.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Instead of llX, use C99 standard "PRIu64" in format specifier. Former one
breaks compile in ppc64le.
Fixes: c2c167fdb3 ("bus/fslmc: support memory event callbacks for VFIO")
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch moves some of the internal vfio functions from
eal_vfio.h to rte_vfio.h for common uses with "rte_" prefix.
This patch also change the FSLMC bus usages from the internal
VFIO functions to external ones with "rte_" prefix
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In case of Receive from Ethernet we add a new pull request (prefetch)
but do not fetch the results from that pull request until next
dequeue operation. This keeps the portal in busy mode.
This patch updates the portals bifurcation to have separate portals
to receive packets for Ethernet and all other devices to use a
common portal.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
VFIO needs to map and unmap segments for DMA whenever they
become available or unavailable, so register a callback for
memory events, and provide map/unmap functions.
Remove unneeded check for number of segments, as in non-legacy
mode this now becomes a valid scenario.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
fslmc bus needs to map all allocated memory for VFIO before
device probe. This bus doesn't support hotplug, so at the time
of this call, all possible device that could be present, are
present. This will also be the place where we install VFIO
callback, although this change will come in the next patch.
Since rte_fslmc_vfio_dmamap() is now only called at bus probe,
there is no longer any need to check if DMA mappings have been
already done.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
It's there, so we might as well use it. Some operations will be
sped up by that.
Since we have to allocate an fbarray for memzones, we have to do
it before we initialize memory subsystem, because that, in
secondary processes, will (later) allocate more fbarrays than the
primary process, which will result in inability to attach to
memzone fbarray if we do it after the fact.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
We already set IOVA addresses of memsegs and memzones to VA
address during initialization, so we don't need to check
whether we're in RTE_IOVA_VA mode anywhere else.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an RehiveTech copyright on them.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If start is set and a device before it matches the data,
this device is returned.
Fixes: c7fe1eea8a ("bus: simplify finding starting point")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Add driver/common folder and skeleton makefile for adding commonly used
functions across mempool, event and net devices.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Since we have support for the strlcpy function in DPDK, replace all
instances where a string is copied using snprintf.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Digest and IV length variable declarations have changed.
These were escaping builds as the debugging macro was disabled.
During dynamic logging change, they were discoverd.
Fixes: 0fbd75a99f ("cryptodev: move IV parameters to session")
Fixes: 7f0034275a ("cryptodev: remove digest length from crypto op")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Some changes had already been pushed via SHA:72654f090a11 patch. This
patch updates them.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
When creating vdev dynamically, vhost pmd driver starts directly without
checking TX/RX queues are ready or not, and thus causes segmentation fault
when vhost library accesses queues. This patch adds a flag to check whether
queues are setup or not, and adds queues setup into dev_start function to
allow user to start them after setting up.
Fixes: aed0b12930 ("net/vhost: fix socket file deleted on stop")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This fix is to remove primary MAC filter during dev stop. Without the
fix device start attempt to add the primary MAC fails. Perform MAC set
remove under IS_PF() check.
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Ethdev RX/TX offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This patch makes use of new offload flags as suggested and fix
the default RX/TX configuration. Also indent the code properly
around those changes.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Medford2 uses a configurable VI window size, and requires
updates to register accesses to use a runtime VI window size
rather than the *_STEP register constants used for earlier
controllers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Intention of the logic is:
If ETH_LINK_SPEED_FIXED is set in dev_conf, set link_autoneg to
ETH_LINK_FIXED, else set it to ETH_LINK_AUTONEG
ETH_LINK_SPEED_FIXED value is 1, and ETH_LINK_FIXED is 0;
Current logic is broken, fix it according above values.
Fixes: 48de41ca11 ("net/avf: enable link status update")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Group ID 0xFF indicates that packages does not change parser
graph so compatible with any other packages.
Fixes: b1ec717bff ("net/i40e: fix multiple DDP packages conflict")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds log when setting input set since global
configuration is changed.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.
Fixes: 2866c5f1b8 ("ixgbe: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add checking for cvq to judge if virtio_ack_link_announce should be called.
The existing code doesn't cause issue, and add the checking just to look
more reasonable.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
It is necessary to add pointer checking because in some case the
code will cause crash. For example, the code goes here before
memory allocation of rxvq is finished.
Fixes: 7365504f77 ("net/virtio: support guest announce")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When using virtio-user with vhost-kernel to exchange
packet with kernel networking stack, application can
set the MAC of the tap interface via parameter.
Signed-off-by: Ning Li <muziding001@163.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
Tested-by: Seán Harte <seanbh@gmail.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
On TX path, add fw_eth_tx_pkt_vm_wr to transmit packets over VF.
Use is_pf4() to correctly calculate the work request size and
offsets within the work request. On RX path, use pktshift to adjust
data offset within the mbuf.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add probe to initialize VF devices. Separate init/de-init paths
for PF and VF. Do firmware state initialization wrt VF and retrieve
various operational parameters by querying firmware. Finally configure
and initialize ports.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add firmware mailbox communication support for VF. Add is_pf4()
to check if driver is attached to PF4. Use is_pf4() to determine
whether to use PF or VF mailbox communication.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add minimal VF driver. Declare functions common to both PF and VF
functionality in separate header file and import the header file.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
As per the following commit the AVP files maintained by Wind River are
converted to use the SPDX license tag format.
commit a4862c9e1a ("license: introduce SPDX identifiers")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The RSS key length returned by rte_eth_dev_info_get command was taken
from the
PMD private structure. This structure initialization was done only after
the port configuration.
Considering Mellanox device supports only 40B long RSS key, reporting
the fixed number instead.
Fixes: 29c1d8bb3e ("net/mlx5: handle a single RSS hash key for all protocols")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In some environments it is desirable to have the NIC perform RSS
normally on the packet regardless of the number of queues configured.
The RSS hash result that is stored in the mbuf can then be used by
the application to make decisions about how to distribute workloads
to threads, secondary processes, or even virtual machines if the
application is a virtual switch. This change to the mlx5 driver
aligns with how other drivers in the Intel family work.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Allain Legacy <allain.legacy@windriver.com>
Remove the second declaration of device_attr [1] inside the loop as well as
the query_device_ex() which has already been done outside of the loop.
[1] https://dpdk.org/ml/archives/dev/2018-March/091744.html
Fixes: 9a761de8ea ("net/mlx5: flow counter support")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
TSO should be set if either of the TSO offload flags is requested.
Fixes: dbccb4cddc ("net/mlx5: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Igb has a bug about queue index for rss rule flow configuration
when set redirection table.
Fixes: 424ae915ba ("net/e1000: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add support the set_mc_addr_list device operation in the i40evf PMD.
The configured addresses are stored in the device private area, so
they can be flushed before adding new ones.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
I40e needs a protection for rss rule flow configuration
after a rule is set for a port.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.
Fixes: d42aaf3000 ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support of choice the preferred firmware variant to use in device
parameters.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When user reissues same flow director cmd with a different queue
update the existing filter to redirect flow to the new desired
queue as destination just like the other filters like 5 tuple and
generic flow.
Fixes: 2d64da097a ("net/bnxt: support FDIR")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The 'opaque' pointer in handler function is the last argument
of sfc_kvargs_process() function and it is pointer to the adapter
'evq_flags' that has a uint32_t type. So 'value' must be pointer
to uint32_t.
Fixes: c22d3c508e ("net/sfc: support parameter to choose performance profile")
Cc: stable@dpdk.org
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This change updates the AVP driver to conform with the new ethdev
offload API. As per these commits:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")'
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")'
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Unlike ffs() rte_bsf32() counts bit position from 0.
Fixes: 0c7a0c35f2 ("net/sfc: calculate Rx buffer size which may be used")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When the vnic_tpa_cfg HWRM command is sent to the FW,
we are not passing the VNIC ID in case of disable.
This can cause the FW to return an error.
Correct VNIC ID needs to be passed for both enable and disable.
Fixes: 0958d8b643 ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The previous patches in the set convert per-port
logging to use NOTICE level and make this level default.
This provides the possibility to remove the dedicated
toggle for init-related messages and merge init logging
with the main log type. In order to keep these logs silent
by default, INFO level should be used.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Conversion to dynamic logging done in the previous patches
makes it possible to simplify internal controls for init
logging. This patch allows to prepare for such a change.
It makes init-unrelated messages use NOTICE level so that
the following patch will be able to convert init logging
to use INFO level and remain silent by default.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
