Flow director rules matching traffic properties above layer 2 do not
target a fixed hash Rx queue (HASH_RXQ_ETH), it actually depends on the
highest protocol layer specified by each flow rule.
mlx5_fdir_filter_delete() makes this wrong assumption and causes a crash
when attempting to destroy flow rules with L3/L4 specifications.
Fixes: 4c3e9bcdd5 ("net/mlx5: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Missing "return -ENOTSUP" will always lead to illegal offload
passing through offload checking.
Fixes: 7497d3e2f7 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
JUMBO_FRAME offload capability should be exposed since i40e
does support it
Fixes: c3ac7c5b0b ("net/i40e: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use dynamic log type (instead of PMD) in vhost.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Convert null device to use dynamic logging.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Convert this driver to use dynamic log level support.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use new logging macro to convert all calls to RTE_LOG() into
new dynamic log type.
Also fix whitespace.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Prepare function that parse flow rule actions to support not
fate-deciding actions.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The mark value for MATCH_ACTION_MARK has a maximum value.
Requesting a value larger than the maximum will cause the
filter insertion to fail with EINVAL. This patch allows the
driver to check the value at the filter validation.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds support for DPDK rte_flow "MARK" and "FLAG" filter
actions to filters on EF10 family NICs.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Filter actions MARK and FLAG are supported on Medford2 by DPDK
firmware variant.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Equal stride super-buffer Rx mode allows to mark packets in HW
using filters. Process the data on datapath and advertise
corresponding features to allow flow API support to implement it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add device argument to customize Rx descriptor wait timeout which
is supported in DPDK firmware variant only in equal stride super-buffer
Rx mode only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
DPDK firmware variant supports equal stride super-buffer Rx mode which
provides higher packet rate and packet marks but requires dedicated
mempool manager with contiguous object block allocation (e.g. bucket).
Also the firmware supports subvariant without checksumming on Tx which
allows to reach higher packet rates on transmit if checksumming is not
required.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Equal stride super-buffer requires mempool with contiguous object
block allocation mechanism. Bucket mempool is the only which provides it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The callback is a dummy yet since no Rx datapath provides its own
callback, so all pools are supported.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
HW Rx descriptor represents many contiguous packet buffers which
follow each other. Number of buffers, stride and maximum DMA
length are setup-time configurable per Rx queue based on provided
mempool. The mempool must support contiguous block allocation and
get info API to retrieve number of objects in the block.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The new argument will be used by the equal stride super-buffer
Rx datapath.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
One HW Rx descriptor has many packet buffers in the case of equal
stride super-buffer Rx modes. Each packet buffer is still treated
as separate SW Rx descriptor. rxq_entries is the size of HW Rx ring
whereas nb_rx_desc is the number of SW Rx descriptors.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Equal stride super-buffer Rx datapath does not support tunnels, code to
parse tunnel packet types and inner checksum offload is not required and
it is important to be able to compile it out on build time to avoid
extra CPU load.
Cutting of tunnels support relies on compiler optimizaitons to
be able to drop extra checks and branches if tun_ptype is always 0.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Equal stride super-buffer Rx datapath will use it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Equal stride super-buffer Rx mode will be handled by the dedicated
Rx datapath and the mode has almost the same Rx event structure as
single packet Rx mode.
Restructure the code to allow the common parts to be shared.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The function may be shared by different Rx datapath implementations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Equal stride super-buffer Rx mode is supported by DPDK firmware
variant. One Rx descriptor provides many Rx buffers to firmware.
Rx buffers follow each other with specified stride.
Also it supports head of line blocking with timeout to address
drops when no Rx descriptors are available. So it gives extra time
to the driver to provide Rx descriptors before drop.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The type is an internal interface. Single integer is insufficient
to carry RxQ type-specific information in the case of equal stride
super-buffer Rx mode (packet buffers per bucket, maximum DMA length,
packet stride, head of line block timeout).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Equal stride super-buffer is a new name instead of deprecated equal
stride packed stream to avoid confusion with previous packed stream.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Drivers should only log with their assigned logtype, not with the
generic PMD log type.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Be consistent with usage in other drivers.
No need for snowflake drivers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The PMD_INIT_LOG macro always adds a newline, and other drivers version
of PMD_DRV_LOG always adds a newline. Therefore change nfp driver
to be consitent with others.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The NFP driver init messages would come out under PMD not net.pmd.nfp.init.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow action.
This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.
This patch also contains updates for the bonding, failsafe and mlx5 PMDs
and testpmd application which are affected by this API change.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
RSS action with only one destination queue and no specific settings
for hash types and key does not require dedicated RSS context and
may be simplified to QUEUE action.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Fix internal report on port specific offload capabilities to be 0 (no
capabilities). Before this commit port capabilities were a clone of queue
capabilities, however the current TAP offload capabilities (e.g.
checksum calculation) are per queue and are not specific per port.
This commit fixes an internal validation check for new configured
queue offloads.
The port capability API keeps reporting all queue capabilities as port
capabilities.
Fixes: 95ae196ae1 ("net/tap: use new Rx offloads API")
Fixes: 818fe14a98 ("net/tap: use new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
mask is a simple bit-mask applied before interpreting the contents
of spec and last.
Fixes: a9825ccf5b ("net/sfc: support flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Add support for virtual function representor ports to the ixgbe PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled in the
process in which the ixgbe PMD is running within, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for virtual function representor ports to the i40e PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled, in the
process in which the i40e PMD is running, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
and to just specify a single representor on virtual function 3 (switch
port id):
-w DBDF,representor=3
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tunnel w/o tunnel id pattern could match any non-tunneled packet,
this patch allowed tunnel w/o tunnel id pattern after proper outer spec.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Dump verb flow detail including flow spec type and size for debugging
purpose.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tunnel RSS level of flow RSS action offers user a choice to do RSS hash
calculation on inner or outer RSS fields. Testpmd flow command examples:
GRE flow inner RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 1 / end
GRE tunnel flow outer RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 0 / end
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
