VXLAN-GPE enables VXLAN for all protocols. Protocol link:
https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
RTE_FLOW_ACTION_TYPE_PORT_ID brings the ability to inject matching traffic
into a different device, as identified by its DPDK port ID.
This is normally only supported when the target port ID has some kind of
relationship with the port ID the flow rule is created against, such as
being exposed by a common physical device (e.g. a different port of an
Ethernet switch).
The converse pattern item, RTE_FLOW_ITEM_TYPE_PORT_ID, makes the resulting
flow rule match traffic whose origin is the specified port ID. Note that
specifying a port ID that differs from the one the flow rule is created
against is normally meaningless (if even accepted), but can make sense if
combined with the transfer attribute.
These must not be confused with their PHY_PORT counterparts, which refer to
physical ports using device-specific indices, but unlike PORT_ID are not
necessarily tied to DPDK port IDs.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the missing action counterpart to the PHY_PORT pattern
item, that is, the ability to directly inject matching traffic into a
physical port of the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
While RTE_FLOW_ITEM_TYPE_PORT refers to physical ports of the underlying
device using specific identifiers, these are often confused with DPDK port
IDs exposed to applications in the global name space.
Since this pattern item is seldom used, rename it RTE_FLOW_ITEM_PHY_PORT
for better clarity.
No ABI impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Contrary to all other pattern items, these are inconsistently documented as
affecting traffic instead of simply matching its origin, without provision
for the latter.
This commit clarifies documentation and updates PMDs since the original
behavior now has to be explicitly requested using the new transfer
attribute.
It breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
Impacted PMDs are bnxt and i40e, for which the VF pattern item is now only
supported when a transfer attribute is also present.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VLAN TCI is a 16-bit field broken down as PCP (3b), DEI (1b) and VID (12b).
The default mask used by PMDs for the VLAN pattern when one isn't provided
by the application comprises the entire TCI, which is problematic because
most devices only support VID matching.
This forces applications to always provide a mask limited to the VID part
in order to successfully apply a flow rule with a VLAN pattern item.
Moreover, applications rarely want to match PCP and DEI intentionally.
Given the above and since VID is what is commonly referred to when talking
about VLAN, this commit excludes PCP and DEI from the default mask.
Fixes: 6de5c0f130 ("ethdev: define default item masks in flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch replaces C99-style flexible arrays in struct rte_flow_action_rss
and struct rte_flow_item_raw with standard pointers to the same data.
They proved difficult to use in the field (e.g. no possibility of static
initialization) and unsuitable for C++ applications.
Affected PMDs and examples are updated accordingly.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch makes the following changes to flow rule actions:
- List order now matters, they are redefined as performed first to last
instead of "all simultaneously".
- Repeated actions are now supported (e.g. specifying QUEUE multiple times
now duplicates traffic among them). Previously only the last action of
any given kind was taken into account.
- No more distinction between terminating/non-terminating/meta actions.
Flow rules themselves are now defined as always terminating unless a
PASSTHRU action is specified.
These changes alter the behavior of flow rules in corner cases in order to
prepare the flow API for actions that modify traffic contents or properties
(e.g. encapsulation, compression) and for which order matter when combined.
Previously one would have to do so through multiple flow rules by combining
PASSTRHU with priority levels, however this proved overly complex to
implement at the PMD level, hence this simpler approach.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
PMDs with rte_flow support are modified accordingly:
- bnxt: no change, implementation already forbids multiple actions and does
not support PASSTHRU.
- e1000: no change, same as bnxt.
- enic: modified to forbid redundant actions, no support for default drop.
- failsafe: no change needed.
- i40e: no change, implementation already forbids multiple actions.
- ixgbe: same as i40e.
- mlx4: modified to forbid multiple fate-deciding actions and drop when
unspecified.
- mlx5: same as mlx4, with other redundant actions also forbidden.
- sfc: same as mlx4.
- tap: implementation already complies with the new behavior except for
the default pass-through modified as a default drop.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Upcoming changes in relation to the handling of actions list will make the
DUP action redundant as specifying several QUEUE actions will achieve the
same behavior. Besides, no PMD implements this action.
By removing an entry from enum rte_flow_action_type, this patch breaks ABI
compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Although pattern items and actions examples end with "and so on", these
lists include all existing definitions and as a result are updated almost
every time new types are added. This is cumbersome and pointless.
This patch also synchronizes Doxygen and external API documentation wording
with a slight clarification regarding meta pattern items.
No fundamental API change.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
These enable more precise reporting of objects responsible for errors.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_destroy()
- rte_flow_error_set()
- rte_flow_flush()
- rte_flow_isolate()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The basic operations for ports enumeration should not be
considered as experimental in DPDK 18.05.
The iterator RTE_ETH_FOREACH_DEV was introduced in DPDK 17.05.
It uses the function the rte_eth_find_next_owned_by() to get
only ownerless ports. Its API can be considered stable.
So the flag experimental is removed from rte_eth_find_next_owned_by().
The flag experimental is removed from rte_eth_dev_count_avail()
which is the new name of the old function rte_eth_dev_count().
The flag experimental is set to rte_eth_dev_count_total()
in the .c file for consistency with the declaration in the .h file.
A lot of internal applications are fixed to not allow experimental API.
Fixes: 8728ccf376 ("fix ethdev ports enumeration")
Fixes: d9a42a69fe ("ethdev: deprecate port count function")
Fixes: e70e26861e ("net/mvpp2: fix build")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Marchand <david.marchand@6wind.com>
It's not possible to setup a queue when the port is started
because of a check in ethdev layer. New capability flags are
added in order to relax this check for devices which support
queue setup in runtime. The functions rte_eth_[rx|tx]_queue_setup
will raise an error only if the port is started and runtime setup
of queue is not supported.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch introduce new TX offload flags for device that supports
IP or UDP tunneled packet L3/L4 checksum and TSO offload.
It will be used for non-standard tunnels.
The support from the device is for inner and outer checksums on
IPV4/TCP/UDP and TSO for *any packet with the following format*:
<some headers> / [optional IPv4/IPv6] / [optional TCP/UDP] / <some
headers> / [optional inner IPv4/IPv6] / [optional TCP/UDP]
For example the following packets can use this feature:
1. eth / ipv4 / udp / VXLAN / ip / tcp
2. eth / ipv4 / GRE / MPLS / ipv4 / udp
Please note that specific tunnel headers that contain payload length,
sequence id or checksum will not be updated.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add supported RSS hash function check in device configuration to
have better error verbosity for application developers.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
skip_ip6_ext function can be exported as a helper, it may be used
by some PMD to skip IPv6 header extensions.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
The rss_conf field is defined as a pointer to struct rte_eth_rss_conf.
Even assuming it is permanently allocated and a pointer copy is safe,
pointed data may change and not reflect an applied flow rule anymore.
This patch aligns with testpmd by making a deep copy instead.
Fixes: 18da437b5f ("ethdev: add flow rule copy function")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
According to
commit 315ee8374e ("doc: reduce initial offload API rework scope
to drivers")
All PMDs should have moved to the new offloads API. Therefore it is safe
to remove the new->old convert helps.
The old->new helpers will remain to support application which still use
the old API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds APIs to support container create/destroy and device
bind/unbind with a container. It also provides API for IOMMU programing
on a specified container.
A driver could use "rte_vfio_container_create" helper to create a new
container from eal, use "rte_vfio_container_group_bind" to bind a device
to the newly created container. During rte_vfio_setup_device the container
bound with the device will be used for IOMMU setup.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently eal vfio framework binds vfio group fd to the default
container fd during rte_vfio_setup_device, while in some cases,
e.g. vDPA (vhost data path acceleration), we want to put vfio group
to a separate container and program IOMMU via this container.
This patch extends the vfio_config structure to contain per-container
user_mem_maps and defines an array of vfio_config. The next patch will
base on this to add container API.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Build error has been reported by Intel build system:
SUSE12SP3_64 / Linux 3.7.10-1 / GCC 4.7.2
lib/librte_vhost/vhost_crypto.c: In function ‘rte_vhost_crypto_set_zero_copy’:
lib/librte_vhost/vhost_crypto.c:1192:2: error:
comparison of unsigned expression < 0 is always false
As enums can be either signed or unsigned, this patch removes
the negative check and cast to unsigned the upper limit check.
Fixes: 939066d965 ("vhost/crypto: add public function implementation")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The auxiliary vector read is implemented only for Linux.
It could be done with procstat_getauxv() for FreeBSD.
Since the commit below, the auxiliary vector functions
are compiled for every architectures, including x86
which is tested with FreeBSD.
This patch is moving the Linux implementation in Linux directory,
and adding a fake/empty implementation for FreeBSD.
Fixes: 2ed9bf3307 ("eal: abstract away the auxiliary vector")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The fake getauxval function does not use its parameter.
So the compiler raised this error:
lib/librte_eal/common/eal_common_cpuflags.c:25:25: error:
unused parameter 'type'
Fixes: 2ed9bf3307 ("eal: abstract away the auxiliary vector")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If mempool manager supports object blocks (physically and virtual
contiguous set of objects), it is sufficient to get the first
object only and the function allows to avoid filling in of
information about each block member.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Primarily, it is intended as a way for the mempool driver to provide
additional information on how it lays up objects inside the mempool.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This message looks suspicious and seen on healthy testpmd.
EAL: WARNING: Master core has no memory on local socket!
The message is wrong: the master lcore is 0 and its socket is 0
and there are multiple available memory segments on socket 0.
At that point in the startup process, the count value is zero,
meaning they are not used yet so the check_socket gets confused.
Fixes: 66cc45e293 ("mem: replace memseg with memseg lists")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
rte_lcore_has_role() returns 0 if role of lcore matches requested
role. The return value of the API is confusing, and this is a known
problem with a deprecation notice announcing the change to more
intuitive semantics:
Commit 064518f68d ("doc: announce EAL API change to lcore role function")
Implement changes announced in the deprecation notice, and remove it.
Also, fix usages of this API to reflect the change. Control thread patches
expected new behavior and were broken before, now they are fixed as well.
Fixes: d651ee4919 ("eal: set affinity for control threads")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This commit removes the experimental tags from the
service cores functions, they now become part of the
main DPDK API/ABI.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Coverity was complaining about not checking result of call to
fcntl() for unlocking the file. Disregarding the fact that error
value returned from fcntl() unlock call is highly unlikely in the
first place, we are subsequently calling close() on that same fd,
which will drop the lock, which makes call to fcntl() unnecessary.
Fix this by removing a call to fcntl() altogether.
Coverity issue: 272607
Fixes: 66cc45e293 ("mem: replace memseg with memseg lists")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Regular expressions are not the best way to match a hierarchical
pattern like dynamic log levels. And the separator for dynamic
log levels is period which is the regex wildcard character.
A better solution is to use filename matching 'globbing' so
that log levels match like file paths. For compatibility,
use colon to separate pattern match style arguments. For
example:
--log-level 'pmd.net.virtio.*:debug'
This also makes the documentation match what really happens
internally.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
We don't want format of eal log level saved values to be visible
in ABI. Move to private storage in eal_common_log.
Includes minor optimization. Compile the regular expression for
each log match once, rather than each time it is used.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Rather than attempting to load the contents of the auxv directly,
prefer to use an exposed API - and if that doesn't exist then attempt
to load the vector. This is because on some systems, when a user
is downgraded, the /proc/self/auxv file retains the old ownership
and permissions. The original method of /proc/self/auxv is retained.
This also removes a potential abort() in the code when compiled with
NDEBUG. A quick parse of the code shows that many (if not all) of
the CPU flag parsing isn't used internally, so it should be okay.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Add the priority RTE_PRIORITY_LAST, used for initialization routines
meant to be run after all other constructors.
This priority becomes the default priority for all DPDK constructors.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Build a central list to quickly see each used priorities for
constructors, allowing to verify that they are both above 100 and in the
proper order.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The previous symbols were deprecated for two releases.
They are now marked as such and cannot be used anymore.
They are replaced by ones respecting the new namespace that are marked
experimental.
As a result, eth_dev attach and detach are slightly reworked to follow
the changes.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
rte_eal_devargs is useless, rte_devargs is sufficient.
Only experimental functions are changed for now.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
rte_eal_devargs_parse can be used by EAL subsystems, drivers,
applications alike.
Device parameters may be presented with different structure each time;
as a single declaration string or several strings each describing
different parts of the declaration.
To simplify the use of this parsing facility, its parameters are made
variadic.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Initially, rte_devargs was meant to be populated once and sometimes
accessed, then never emptied.
With the new hotplug functionality having better standing, new usage
appeared with repeated addition of devices and their subsequent removal.
Exposing devargs_list pushed bus drivers and libraries to be careless
and inconsistent in their memory management. Making it private will
allow to rationalize this part of the EAL and ensure that fewer memory
leaks occur during operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In preparation to making devargs_list private.
Bus drivers generally need to access rte_devargs pertaining to their
operations. This match is a common operation for bus drivers.
Add a new accessor for the rte_devargs list.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The management threads must not bother the dataplane or service cores.
Set the affinity of these threads accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
