On Medford, with full-featured firmware running, encapsulated
packets may not be delivered unless filters are inserted for
them, as ordinary filters are not applied to encapsulated
packets. So filters for encapsulated packets need to be
inserted for each class of encapsulated packet. For simplicity,
catch-all filters are always inserted. These may match more
packets than the OS has asked for, but trying to insert more
precise filters increases complexity for little gain.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
This supports filters which match all unicast or multicast
inner frames in VXLAN, GENEVE, or NVGRE packets.
(Additional fields to match on can be added easily.)
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
MC_CMD_FILTER_OP_IN_EXT is needed to set filters for encapsulated
packets.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
VXLAN/NVGRE (and Geneve) support is available on SFN8xxx with
full-feature firmware variant running.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
fs_bus_uninit is always returning 0 no matter what was the status
of each sub device bus_uninit value.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
As no matter the PF host driver is DPDK or other kernel drivers,
they are sharing the same virtchnnl interfaces to communicate to VFs.
To follow the generic interface, DPDK PF need to set Interrupt
Throttling (ITR) index according to the rxitr_idx from virtchnnl
instead of ITR_NONE.
Fixes: 6d59e4ea74 ("net/i40e: change version number to support Linux VF")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Since there's no specific version number to distinguish
DPDK PF and Linux kernel PF, DPDK VF won't recognize if
host is DPDK PF or kernel PF. The specific virtual channel
commands for DPDK pf can be deleted.
This patch removes I40E_VIRTCHNL_OP_CFG_VLAN_PVID.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
The corrupted code used wrongly snprintf return value as the
number of characters actually copied, in spite of the meaning
is the number of characters which would be generated for the
given input.
It caused to remain zerod bytes between the failsafe command line
non sub device parameters indicates end of string.
Hence, when rte_kvargs_parse tried to parse all parameters, it
got end of string after the first one and the others weren't parsed.
So, if the mac parameters was the first in command line it was
taken while hotplug_poll was left default, and vice versa.
The fix updates the buffer index by dedicated variable contains
the copy size, by the way validates the comma separation.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
By default, Verbs maps the doorbell register to write combining.
Working with write combining is useful for drivers which use blue flame
for the doorbell write.
Since mlx5 PMD uses only doorbells and write combining mapping requires
an extra memory barrier to flush the doorbell after its write, setting
the mapping to un-cached by default.
Such change is expected to reduce the max and average round trip latency.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Alexander Solganik <solganik@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The reason for the requirement of a barrier between the txq writes
and the doorbell record writes is to avoid a case where the device
reads the doorbell record's new value before the txq writes are flushed
to memory.
The current use of rte_wmb is not necessary, and can be replaced by
rte_io_wmb which is more relaxed.
Replacing the rte_wmb is also expected to improve the throughput.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Alexander Solganik <solganik@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In function qede_rss_reta_update(), the pointer params returned from
call to function rte_zmalloc() may be NULL and will be dereferenced.
So, should judge if the params is NULL or not.
Fixes: 8b3ee85efe ("net/qede: fix RSS table entries for 100G adapter")
Cc: stable@dpdk.org
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Acked-by: Harish Patil <harish.patil@cavium.com>
The sub_device iterator macro should follow the general gist of the
tailq API for an easier understanding and safer use.
Once the loop has finished, the iterator should be set to NULL.
If no sub_device was iterated upon, the iterator should still be NULL.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In enic_alloc_consistent() function, if rte_malloc for mze is failed,
!mze is true, memzone should be freed and function should return NULL.
Fixes: da5f560be9 ("net/enic: fix memory freeing")
Cc: stable@dpdk.org
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend debug logs verbosity by printing the full completion with error
along with the entire txq in case of error. For the Rx case no logs were
added since such errors are counted and recovered by the Rx data path.
Such prints are essential to understand the root cause for the error.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When adding a VF MAC address, rte_eth_dev_mac_addr_add is called.
It's not right, because this API is used to add a MAC address for
a VMDq pool not a VF. Although it can work on ixgbe as VMDq pool
and VF mean the same thing on ixgbe.
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Currently, rte_eth_dev_mac_addr_add is used by a testpmd CLI
to add a MAC address for VF. But the parameter 'pool' of this
API means the VMDq pool, not VF.
So, it's wrong to use it to add the VF MAC address.
This patch provides a new API that can be used to
add VF MAC address on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The corrupted code didn't unlock the spinlock in xstats
get and reset functions error flow.
Hence, if these errors happened, the device spinlock was
left locked and many mlx5 device functionalities were blocked.
The fix unlocks the spinlock in the missed places.
Fixes: e62bc9e706 ("net/mlx5: fix extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In the function ixgbe_flow_create(), the value ntuple_filter_ptr,
ethertype_filter_ptr, syn_filter_ptr, fdir_rule_ptr and l2_tn_filter_ptr
use rte_zmalloc().
malloc may return NULL, so we should check if the return value is NULL
or success.
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the mapping of user priority to traffic class
in Rx/Tx path of DCB configuration. Each DCB traffic class
should include all user priorities mapping to it in both Rx and
Tx path.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
This version of MLNX_OFED is no more supported.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Since MLNX_OFED 4.1 this code is no more useful.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Secondary process is a copy/paste of the mlx4 drivers, it was never
tested and it even segfault at the secondary process start in the
mlx5_pci_probe().
This makes more sense to wipe this non working feature to re-write a
working and functional version.
Fixes: a48deada65 ("mlx5: allow operation in secondary processes")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Those are useless since DPDK headers have been cleaned up.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Those two if statements are useless as there is a verification on the drop
field of the flow to jump to the end of the function just above.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Vector PMD returns buffers to the application without setting the pointers
in the Rx queue to null nor allocating them. When the PMD cleanup the ring
it needs to take a special care to those pointers to not free the mbufs
before the application have used them nor if the application have already
freed them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
To use the vector, it needs to add to the PMD Rx mbuf ring four extra mbuf
to avoid memory corruption. This additional mbuf are added on dev_start()
whereas all other mbuf are allocated on queue setup.
This patch brings this allocation back to the same place as other mbuf
allocation.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch prepare the merge of fake mbuf allocation needed by the vector
code with rxq_alloc_elts() where all mbuf of the queues should be
allocated.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
We need to support how firmware metadata was handled until now and also
the new API, since NFP NFD 3.0 firmware versions. The new metadata API
adds flexibility for working with different metadata types and, mainly,
to allow adding metadata from different firmware components independently.
Although this patch just supports one type handled by the PMD, future uses
regarding firmware apps will extend this support.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
A DPDK app could, whatever the reason, send packets with size 0.
The PMD is not sending those packets, which does make sense,
but the problem is the mbuf is not released either. That leads
to mbufs not being available, because the app trusts the
PMD will do it.
Although this is a problem related to app wrong behavior, we
should harden the PMD in this regard. Not sending a packet with
size 0 could be problematic, needing special handling inside the
PMD xmit function. It could be a burst of those packets, which can
be easily handled, but it could also be a single packet in a burst,
what is harder to handle.
It would be simpler to just send that kind of packets, which will
likely be dropped by the hw at some point. The main problem is how
the fw/hw handles the DMA, because a dma read to a hypothetical 0x0
address could trigger an IOMMU error. It turns out, it is safe to
send a descriptor with packet size 0 to the hardware: the DMA never
happens, from the PCIe point of view.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This patch is to align with PF kernel driver version 5.1.3 to add the
number of queues to transmit VLAN packets in msg of queue info to VF.
If DCB is enabled, it is the number of DCB traffic classes.
If DCB is not enabled and default VLAN is enabled, it is 1.
For other cases, it is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
igb_uio and vfio-pci does pci reset during open and release of device.
So FLR request to LiquidIO PF driver during init and close in PMD is not
required.
See commit b58eedfc7d ("igb_uio: issue FLR during open and release of
device file")
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
The corrupted code couldn't recognize that all sub devices
were not ready for Tx traffic when failsafe PMD was trying
to switch device because of an unreachable condition using.
Hence, the current Tx sub device variable was not updated
correctly.
The fix removed the unreachable branch and added new one
in the right place respecting the original intent.
Fixes: ebea83f899 ("net/failsafe: add plug-in support")
Fixes: 598fb8aec6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
intr_vec was not properly configured. This is not a problem when
just one queue is supported but it fails with multiqueue.
Some minor refactoring also done for hardware interrupt configuration.
Fixes: ea121b2831 ("net/nfp: add Rx interrupts")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Redirection table was not being updated properly.
There is also a problem when configuring RSS.
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
If not a valid mac present in configuration bar, PMD creates a random
one. It needs to be passed to the NIC.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Flow control watermark is not read out correctly,
that may cause an application who not intend to change
watermark but does change it with a rte_eth_dev_flow_ctrl_set
call right after rte_eth_dev_flow_ctrl_get.
The idea fix is, during init, the watermark is set with default value,
so it is not necessary to read out from hw register during flow_ctl_get,
But due to I40E_GLRPB_GHW limitation, it is shared by different ports on
the same device, it is possible the value is changed on another port,
but local variable not sync, so we have to read out register every
flow_ctl_get.
Fixes: f53577f069 ("i40e: support flow control")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Calling i40e_vsi_delete_mac without checking return
value (as is done elsewhere 5 out of 6 times)
Coverity issue: 140735
Fixes: 43c89d5a4f ("net/i40e: set VF MAC from PF")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a mode type check for MAC VLAN mode, if fdir is
in this mode, it do not need to do sanity check for x550.
Fixes: dc0c16105d ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Scan now searches for devices through sysfs interface and adds them
to a list for later initialization. During probe, each device is
initialized accroding to its property.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Initially, DPAA2 objects (except ETH and CRYPTO) were defined from VFIO
layer. This patch moves that into Bus definition.
This patch also realigns the object types with the new device types.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Existing devices and drivers depended on device ID rather than type.
A new enumerator for all DPAA2 devices is introduced in this patch.
At this point, the probe would not be able to link DPAA2 devices
with the driver and I/O would not work. Subsequent patches will
fix this.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently DPAA2 code doesn't support multiple groups and containers.
Remove such provision in code to simplify code.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
