Adding code snippet using literalinclude so that to keep
automatically these structures in doc in sync with the
bbdev source code.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Casting explicitly from enum to uint8_t to avoid compilation
warning with clang 3.4.2:
rte_bbdev.c:1179:13: error:
comparison of constant 4 with expression
of type 'enum rte_bbdev_enqueue_status' is always true
[-Werror,-Wtautological-constant-out-of-range-compare]
Bugzilla ID: 1095
Fixes: 1be86f2e94 ("bbdev: add device status info")
Fixes: 4f08028c5e ("bbdev: expose queue related warning and status")
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
Code clean up due to if-check not required
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added parameters in rte_bbdev_queue_data to expose information
with regards to any queue related failure and warning
which cannot be supported in existing API.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Extended bbdev operations to support FFT based operations.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added more options in the API to expose the number
of queues exposed and related priority.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added device status information, so that the PMD can
expose information related to the underlying accelerator device status.
Minor order change in structure to fit into padding hole.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Mingshan Zhang <mingshan.zhang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Updated the enum for rte_bbdev_op_type
to allow to keep ABI compatible for enum insertion
while adding padded maximum value for array need.
Removing RTE_BBDEV_OP_TYPE_COUNT and instead exposing
RTE_BBDEV_OP_TYPE_SIZE_MAX.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Start a new release cycle with empty release notes.
The ABI version becomes 23.0.
The map files are updated to the new ABI major number (23).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Special handling of removed drivers is also dropped in check-abi.sh and
a note has been added in libabigail.abignore as a reminder.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove the use of double "the" as it does not make sense.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix spelling errors in comments including doxygen found using codespell.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This promotes the bbdev interface to stable.
Overdue for some time as bbdev interface has been stable.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the libraries access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Rather than maintaining a separate list of libraries which are to be
built on windows, use the standard library list and explicitly add to
each library that is not to be built a check for windows and disable
the library at that per-lib level. As well as shortening the main
lib/meson.build file, this also leads to the build summary at the end of
the meson config run correctly listing the libraries which are not to be
built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Added device information to capture explicitly the assumption
of the input/output data byte endianness being processed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Queue setup may genuinely fail when adding incremental queues
for a given priority level. In that case application would
attempt to configure a queue at a different priority level.
Not an actual error.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Adding option to drop CRC24B to align with existing
feature for 5G
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Adding a missing operation when CRC16
is being used for TB CRC check.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSIX.1, POSIX.1-2001, or POSIX.1-2008. Present on the BSDs.)
The file is missing on Windows. During the Windows build, DPDK uses a
bundled copy, so building a DPDK library works fine. But when OVS or other
applications use DPDK as a library, because some DPDK public headers
include 'sys/queue.h', on Windows, it triggers an error due to no such
file.
One solution is to install the 'lib/eal/windows/include/sys/queue.h' into
Windows environment, such as [1]. However, this means DPDK exports the
functionalities of 'sys/queue.h' into the environment, which might cause
symbols, macros, headers clashing with other applications.
The patch fixes it by removing the "#include <sys/queue.h>" from
DPDK public headers, so programs including DPDK headers don't depend
on the system to provide 'sys/queue.h'. When these public headers use
macros such as TAILQ_xxx, we replace it by the ones with RTE_ prefix.
For Windows, we copy the definitions from <sys/queue.h> to rte_os.h
in Windows EAL. Note that these RTE_ macros are compatible with
<sys/queue.h>, both at the level of API (to use with <sys/queue.h>
macros in C files) and ABI (to avoid breaking it).
Additionally, the TAILQ_FOREACH_SAFE is not part of <sys/queue.h>,
the patch replaces it with RTE_TAILQ_FOREACH_SAFE.
[1] http://mails.dpdk.org/archives/dev/2021-August/216304.html
Suggested-by: Nick Connolly <nick.connolly@mayadata.io>
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
