The new mbuf pool type is added to testpmd. To engage the
mbuf pool with externally attached data buffers the parameter
"--mp-alloc=xbuf" should be specified in testpmd command line.
The objective of this patch is just to test whether mbuf pool
with externally attached data buffers works OK. The memory for
data buffers is allocated from DPDK memory, so this is not
"true" external memory from some physical device (this is
supposed the most common use case for such kind of mbuf pool).
The user should be aware that not all drivers support the mbuf
with EXT_ATTACHED_BUF flags set in newly allocated mbuf (many
PMDs just overwrite ol_flags field and flag value is getting
lost).
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
ol_flags can be wrong if DEV_TX_OFFLOAD_VLAN_INSERT is not set in
tx_offloads
Fixes: 3eecba267c ("app/testpmd: cleanup internal Tx offloads flags field")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The tx_ol_flags field was used in order to control the different
Tx offloads set. After the conversion to the new Ethdev Tx offloads API
it is not needed anymore as the offloads configuration is stored in
ethdev structs.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The mbuf ol_flags were taken directly from testpmd internal enumeration
leading to incorrect values.
addressing only insertion offload flags as the checksum flags by
the application design are only with csum forwarding.
Fixes: e9e23a617e ("app/testpmd: add flowgen forwarding engine")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add basic management functions for the generic flow API (validate, create,
destroy, flush, query and list). Flow rule objects and properties are
arranged in lists associated with each port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
"flowgen" forwarding mode has fixed packet size (300).
Let it re-use --txpkts option for specifying generated packet size.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds retry option in testpmd to prevent most packet losses.
It can be enabled by "set fwd <mode> retry". All modes except rxonly
support this option.
Adding retry mechanism expands test case coverage to support scenarios
where packet loss affects test results.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
If double vlan is detected, its stripped flag and vlan tags can be
printed on rxonly mode. Test command of 'tx_vlan set' is expanded
to set both single and double vlan tags on TX side for each packets
to be sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
On machines that are strict on pointer alignment, current code breaks
on GCC's -Wcast-align checks on casts from narrower to wider types.
This patch introduces new unaligned_uint(16|32|64)_t types, which
correctly retain alignment in such cases. Strict alignment
architectures will need to define CONFIG_RTE_ARCH_STRICT_ALIGN in
order to effect these new types.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The vlan_macip structure combined a vlan tag id with l2 and l3 headers
lengths for tracking offloads. However, this structure was only used as
a unit by the e1000 and ixgbe drivers, not generally.
This patch removes the structure from the mbuf header and places the
fields into the mbuf structure directly at the required point, without
any net effect on the structure layout. This allows us to treat the vlan
tags and header length fields as separate for future mbuf changes. The
drivers which were written to use the combined structure still do so,
using a driver-local definition of it.
Reduce perf regression caused by splitting vlan_macip field. This is
done by providing a single uint16_t value to allow writing/clearing
the l2 and l3 lengths together. There is still a small perf hit to the
slow path TX due to the reads from vlan_tci and l2/l3 lengths being
separated. (<5% in my tests with testpmd with no extra params).
Unfortunately, this cannot be eliminated, without restoring the vlan
tags and l2/l3 lengths as a combined 32-bit field. This would prevent
us from ever looking to move those fields about and is an artificial tie
that applies only for performance in igb and ixgbe drivers. Therefore,
this patch keeps the vlan_tci field separate from the lengths as the
best solution going forward.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The initial role of rte_ctrlmbuf is to carry generic messages (data
pointer + data length) but it's not used by the DPDK or it applications.
Keeping it implies:
- loosing 1 byte in the rte_mbuf structure
- having some dead code rte_mbuf.[ch]
This patch removes this feature. Thanks to it, it is now possible to
simplify the rte_mbuf structure by merging the rte_pktmbuf structure
in it. This is done in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated patch to HEAD.
* Modified patch to retain the old function names for ctrl mbufs as
macros. This helps with app compatibility, and allows the concept
of a control mbuf to be reintroduced via a single-bit flag in
a future change.
* Updated the packet framework ip_pipeline example application to
work following this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit adds a multi-flow traffic generator forwarding engine. In effect,
this forwarding mode functions very similar to the txonly mode, with the
difference that it generates multiple L4 flows.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
