The rte_atomic64_exchange operation for ppc_64 incorrectly linked
back to a 32 bit generic operation (__atomic_exchange_4) rather than
the 64 bit generic operation (__atomic_exchange_8). As a result,
applications that used rte_eth_link_get_nowait() would only receive
the link speed, they would not receive the link state, link duplex,
or link autoneg properties.
Fixes: ff2863570f ("eal: introduce atomic exchange operation")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This is a commonly used operation that surprisingly the
DPDK has not supported. The new rte_pktmbuf_copy does a
deep copy of packet. This is a complete copy including
meta-data.
It handles the case where the source mbuf comes from a pool
with larger data area than the destination pool. The routine
also has options for skipping data, or truncating at a fixed
length.
This patch also introduces internal inline to copy the
metadata fields of mbuf.
Add a test for this new function, based of the clone tests.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Cloning mbufs requires allocations and iteration
and therefore should not be an inline.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This copy part of this function is too big to be put inline.
The places it is used are only in special exception paths
where a highly fragmented mbuf arrives at a device that can't handle it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
No functional change.
Clarify the populate function to make future changes easier to
understand.
Rename the variables:
- to avoid negation in the name
- to have more understandable names
Remove useless variable (no_pageshift is equivalent to pg_sz == 0).
Remove duplicate affectation of "external" variable.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds support to allow users enable/disable allmulticast mode for
kni interface.
This requirement comes from bugzilla 312, more details can refer to:
https://bugs.dpdk.org/show_bug.cgi?id=312
Bugzilla ID: 312
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
EAL should always use rte_log instead of putting errors to
stderr (which maybe redirected to /dev/null in a daemon).
Also checks for null before rte_free are unnecessary.
Minor code consistency improvements.
Fixes: 21698354c8 ("service: introduce service cores concept")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Have rte_eal_config_reattach clean up the mapped address which is a valid
address but not the one intended.
Coverity issue: 343439
Fixes: 4e8854ae89 ("eal: do not panic on shared memory init")
Fixes: b149a70642 ("eal/freebsd: add config reattach in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Arnon Warshavsky <arnon@qwilt.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The code checks both rte_mp_request_sync() return code and that the number
of messages in the reply equals 1. If rte_mp_request_sync() succeeds but
there was more than one message, those messages would get leaked.
Found via code review by Anatoly Burakov of patches that used the vhost
code as a template for using rte_mp_request_sync().
Fixes: 83a73c5fef ("vfio: use generic multi-process channel")
Cc: stable@dpdk.org
Reported-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
RTE_BPF_ARG_PTR_STACK is used as internal program
arg type. Rename to RTE_BPF_ARG_RESERVED to
avoid exposing internal program type.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add branch and call operations.
jump_offset_* APIs used for finding the relative offset
to jump w.r.t current eBPF program PC.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Implement XADD eBPF instruction using STADD arm64 instruction.
If the given platform does not have atomics support,
use LDXR and STXR pair for critical section instead of STADD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add mov, add, sub, mul, div and mod arithmetic
operations for immediate and source register variants.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add prologue and epilogue as per arm64 procedure call standard.
As an optimization the generated instructions are
the function of whether eBPF program has stack and/or
CALL class.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add build infrastructure and documentation
update for arm64 JIT support.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This structure has been missed during the big rework.
Fixes: 5ef2546767 ("net: add rte prefix to ESP structure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there are DEFAULT,TOEPLITZ and SIMPLE_XOR hash function.
To support symmetric hash by rte_flow RSS action, this patch adds
new hash function "Symmetric Toeplitz" which is supported by some hardware.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Only the mapping of the vring addresses is being ensured. This causes
errors when the vring size is larger than the IOTLB page size. E.g:
queue sizes > 256 for 4K IOTLB pages
Ensure the entire vring memory range gets mapped. Refactor duplicated
code for for IOTLB UPDATE and IOTLB INVALIDATE and add packed virtqueue
support.
Fixes: 09927b5249 ("vhost: translate ring addresses when IOMMU enabled")
Cc: stable@dpdk.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Besides the enqueue/dequeue API, other APIs of the builtin net
backend should also be protected.
Fixes: a368804699 ("vhost: protect active rings from async ring changes")
Cc: stable@dpdk.org
Reported-by: Peng He <xnhp0320@icloud.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When live migration starts, QEMU will set ring addrs again for
each virtqueue. In this case, we should try to translate ring
addrs after we invalidating the ring, otherwise virtqueues can
be enabled with the addrs untranslated. Besides, also leverage
the access_ok flag in non-IOMMU case to prevent the data path
accessing invalidated virtqueues.
Fixes: 5a4933e56b ("vhost: postpone ring address translations at kick time only")
Cc: stable@dpdk.org
Reported-by: Yilong Lv <lvyilong.lyl@alibaba-inc.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the device has been started, don't do the reallocation anymore.
Otherwise the pointers used in application threads can be invalidated
without proper protection. Instead of introducing a global lock to
protect the change of device pointers which will hurt the performance,
let's just do the reallocation during setup.
Fixes: af295ad469 ("vhost: realloc device and queues to same numa node as vring desc")
Cc: stable@dpdk.org
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This function is listed under EXPERIMENTAL in the
rte_vhost_version.map, so it needs to be marked
with __rte_experimental in the header file as well.
Found by check-experimental-syms.sh when trying to compile
DPDK with -finstrument-functions. This script didn't
catch this in the normal case, since the function is
declared __rte_always_inline.
This also requires updating the vhost_scsi example to allow
use of this newly marked experimental API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable all-multicast mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
all-multicast mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured all-multicast
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_macaddr_get() return value from void to int
and return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so modify usage of these
functions across lib/librte_kni according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable promiscuous mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
promiscuous mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured promiscuous
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
We need to close the old slave request fd if any first
before taking the new one.
Fixes: 275c3f9447 ("vhost: support slave requests channel")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds an operation callback which gets called every time
the library is waking up the guest trough an eventfd_write() call.
This can be used by 3rd party application, like OVS, to track the
number of times interrupts where generated. This might be of
interest to find out system-call were called in the fast path.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to int,
so this patch modify rte_eth_dev_info_get() usage across
pdump component according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
latency component according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_dev_info_get() return value from void to int and return
negative errno values in case of error conditions.
Modify rte_eth_dev_info_get() usage across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Primary process is responsible to initialize the data struct of each
crypto devices.
Secondary process should not override this data during the
initialization.
Fixes: d11b0f30df ("cryptodev: introduce API and framework for crypto devices")
Cc: stable@dpdk.org
Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
HFN can be given as a per packet value also.
As we do not have IV in case of PDCP, and HFN is
used to generate IV. IV field can be used to get the
per packet HFN while enq/deq
If hfn_ovrd field in pdcp_xform is set,
application is expected to set the per packet HFN
in place of IV. Driver will extract the HFN and perform
operations accordingly.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Replace /**< with /** for multiline doxygen comments.
Fixes: c261d1431b ("security: introduce security API and framework")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
