RSS for GTP with outer & inner ipv4 & ipv6 combination are supported
in this patch, so that we can process RSS based on inner 5 tuples or
3 tuples of all the cases below of GTP packets:
1. ipv4 (outer) + ipv4 (inner)
2. ipv4 (outer) + ipv6 (inner)
3. ipv6 (outer) + ipv4 (inner)
4. ipv6 (outer) + ipv6 (inner)
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS for GTP with outer & inner ipv4 & ipv6 combination are supported
in this patch, so that we can process RSS based on inner 5 tuples or
3 tuples of all the cases below of GTP packets:
1. ipv4 (outer) + ipv4 (inner)
2. ipv4 (outer) + ipv6 (inner)
3. ipv6 (outer) + ipv4 (inner)
4. ipv6 (outer) + ipv6 (inner)
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When adding a RSS rule with pattern MAC_PPPOE_IPV4_UDP and input
set SRC/DST IPV4, because of incomplete protocol header fields,
the rule can't do hash with inner src/dst ipv4. PPPOE_IPV4_TCP/SCTP
and PPPOE_IPV6_UDP/TCP/SCTP also have similar issues. This patch
complements protocol header fields for PPPOE data packets.
Fixes: 0b952714e9 ("net/ice: refactor PF hash flow")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Writing to read-only fields returns a non-OK Return Status
for shadow RAM write command for X550.
This information was previously discarded.
Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The codes has been exposed correctly, so remove pre-processor tags.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
We are seeing interoperability issues with switches when 2.5G and 5G
in x550 are advertised by default, so default to off.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Write FDIRIP6M register to allow flow director filter
to set ipv6 rules without setting ipv6 source/destination address.
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
On ESXi OS, when user disables auto negotiation, the following log
appears: "(unsupported) Flow control autoneg is disabled".
It is true that auto negotiation is disabled but it is
not necessarily true that it is not supported.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
While sending request using ixgbe_hic_unlocked() the data field in
buffer struct is not used. It is set when the struct is overwritten by
FW to deliver the response. To not pass random data to FW the whole
structure should be zeroed before use.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The function ixgbe_device_supports_autoneg_fc is checking whether
a particular device and medium configuration is supporting
Flow Control Autonegotiation. In case of non-support, the message
is always logged which is confusing.
The fix is removing unnecessary log entry.
Signed-off-by: Zalfresso-Jundzillo <marekx.zalfresso-jundzillo@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add typecast for type mismatch.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This patch is for restarting auto negotiation on PHY.
Signed-off-by: Jakub Chylkowski <jakubx.chylkowski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
The retry variable was being incremented before it was evaluated by the
subsequent conditional against the maximum retries to figure out which
message to print. So we'll move the increment op to the end.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Remove unnecessary extra whitespace on all function comments, replacing
' * ' with ' * '.
This was done automatically via sed using the following transformation:
sed 's/^ \* / * /'
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Several functions in the driver code have a weird function comment
formatting which uses two spaces instead of only one space for the main
function body.
This formatting will be mechanically fixed by sed in a future patch, but
doing so leads to some spelling warnings on that patch. Cleanup the
spelling mistakes that will be detected first. This way, it is easier to
verify the mechanical transformation done by sed in the following patch.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
In some corner cases the functions ixgbe_clear_rar_generic and
ixgbe_clear_vmdq_generic may call one another leading to infinite
recursion.
When ixgbe_clear_vmdq_generic is called with IXGBE_CLEAR_VMDQ_ALL
flag, it's going to clear MPSAR registers, and proceed to call
ixgbe_clear_rar_generic, which in turn will clear the RAR registers,
and recursively call back ixgbe_clear_vmdq_generic. Normally, the
latter would detect that MPSAR registers have already been cleared
and terminate the recursion.
However, when PCIe link is down, and before the driver has had the
opportunity to shut itself down, all register reads return 0xFFFFFFFF,
and all register writes fail silently. In such case, because
ixgbe_clear_vmdq_generic blindly assumes that clearing MPSAR registers
succeeded, it's going to always call ixgbe_clear_rar_generic, which
in turn will always call back ixgbe_clear_vmdq_generic, creating
infinite recursion.
This patch re-reads MPSAR register values after they had been cleared.
In case of PCIe link failure, the values read will be non-zero, which
will terminate the recursion. On the other hand, under normal
circumstances the value read from MPSAR registers is going to be equal
to the value previously written, so this patch is expected not to cause
any regressions.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
With the NVM image for x550em XFI will not report
the auto-negotiation feature correctly. The auto-negotiation
should be "No" for supports and advertised items.
At the same time update speed makes it support 1G and 10G.
Fixes: 833df43399 ("net/ixgbe/base: add SGMII link for X550")
Cc: stable@dpdk.org
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
For the "Apply Update" command the firmware does not
given an response. For this command, success should
be return.
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Host interface Shadow RAM Read (0x31) command response
buffer length should be stored in two bytes, instead of one byte.
This patch fixes it.
Fixes: e6102361b1 ("net/ixgbe/base: use 2 bytes for flash read command")
Cc: stable@dpdk.org
Signed-off-by: Mateusz Kowalski <mateusz.kowalski@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add support for .get_reg eth_dev ops which will be used to collect the
firmware debug data.
PMD on detecting on some HW errors will collect the FW/HW Dump to a
buffer and then it will save it to a file implemented in
qede_save_fw_dump().
Dump file location and name:
Location: <RTE_SDK> or DPDK root
Name: qede_pmd_dump_mm-dd-yy_hh-mm-ss.bin
DPDK applications can initiate a debug data collection by invoking DPDK
library’s rte_eth_dev_get_reg_info() API. This API invokes .get_reg()
interface in the PMD.
PMD implementation of .get_reg() collects the FW/HW Dump, saves it to
data field of rte_dev_reg_info and passes it to the application. It’s
the responsibility of the application to save the FW/HW Dump to a file.
We recommendation using the file name format used by qede_save_fw_dump().
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
The patch adds QEDE PMD ops and APIs to calculate the size and collect
the debug dump for various firmware components. The patch adds new files
qede_debug.[ch] that has all the firmware debug data collection
infrastructure changes.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch adds base driver APIs required for debug data collection.
It adds support for dumping internal lookup tables(ilt), reading nvram
image, register definitions.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch rearranges some of the base driver structures which will be
also used by debug data collection (DDC) implementation. It adds a new
file ecore_hsi_func_common.h with Physical, Virtual memory descriptors.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
When external buffer is used, driver should detach it if it doesn't make
it successfully to the queue.
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When rte_pktmbuf_attach_extbuf() is used, the driver should not decrease
the reference count in its callback function hn_rx_buf_free_cb, because
the reference count is already decreased by rte_pktmbuf. Doing it twice
may result in underflow and driver may never send an ack packet over
vmbus to host.
Also declares rxbuf_outstanding as atomic, because this value is shared
among all receive queues.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Caught by code review, rte_eth_dev_socket_id() returns -1 on error.
The code should behave the same, but still, do not use LCORE_ID_ANY for
something that is not a lcore id.
Fixes: c15c589734 ("net/bonding: avoid allocating mempool on unknown socket")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
Instead of using hardcoded values for the byte/pkt value shifts/masks
to read from the HW counters, use the shift/mask values from the device
template params
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Inorder to offload flows on the vfrep device, it must be
populated with rte_flow_ops.
This patch enables the same.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix to use the vf's vnic port for ingress flows whose
port action is a vf rep port.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for set transport port source and destination
rewrite action items. This allows changing the tcp or udp
source/destination ports for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for set ipv4 address action items. It allows the source
or destination ip address to be changed for a given flow.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for conditional mapper result opcodes. The conditional
opcodes allows to set the action details in hardware based on the
actions configured for the flow. This allows aggregation of multiple
templates.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added port configuration changes to support full offload
rules when VF representor ports are used. The direction of
the flow is determined using the configured direction and the
configured match and action ports of the flow create.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for the PF and VF port action items in the flow
create. During flow create the output port action can now be specified
as PF or VF port and those ports are parsed accordingly and converted
to vnic or vport as per the flow direction.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added number of vlan tags in the computed field list so conditional
table execution could be done based on number of vlan tags in the
flow create.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The outer ip protocol was not encapsulated in the right location
when ip header is sent by the application. The order of encapsulation
has to be reversed.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Removed the vnic and vport bitmaps from template matching. It
is assumed that these will be populated implicitly and based
on the direction the appropriate action property shall be used.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vlan push and vlan pop actions
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The return value of some functions is explicitly ignored
in cases where scope id may not be valid for internal EM
entries.
Additional minor refactoring and cleanups
- Change log level for some log messages to DEBUG instead of ERR.
- Check data size conformity and log appropriate message.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Brought in the latest hsi_struct_def_dpdk.h in order to get
the TF global cfg set/get HWRM cmds.
HWRM API is now updated to version 1.10.1.48
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for index opcode constant so that
parif configuration could be constant value.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added validations to the ulp parser to validate the dpdk port id
and phy port index during the flow creation.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for the vlan headers in the matching of the flow
patterns.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The vxlan encap and decap flows need to allocate the source
record property and populate the action fields during the
flow parsing.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Add bnxt vector PMD support using NEON SIMD instructions.
Also update the 20.08 release notes with this information.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
The bnxt vector mode receive handler does not support the rte_flow
'mark' action. Since we cannot know in advance whether this action
will be required, add support for dynamically switching from vector
to non-vector receive when the first flow create request with a
mark action is processed.
Fixes: 94eb699bc8 ("net/bnxt: support flow mark action")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for raw flow, which can be used for any
protocol rules.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TC distribution size is set with dist_queues or
nb_rx_queues % dist_queues in order of TC priority.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1) dpni_set_rx_hash_dist and dpni_set_rx_fs_dist used for TC
configuration instead of dpni_set_rx_tc_dist. Otherwise,
re-configuration of default TC of QoS fails.
2) Default miss action is to drop. "export
DPAA2_FLOW_CONTROL_MISS_FLOW=flow_id" is used receive the missed
packets from flow with flow ID specified.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In HW/MC logical, QoS setup should follow FS setup.
In addition, Skip QoS setup if MAX TC number of DPNI is set 1.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Check flow attributions and actions before creating flow.
Otherwise, the QoS table and FS table need to re-build
if checking fails.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Make more sense to use RXQ index for queue distribution
instead of flow ID.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Default distribution size of TC is 1, which is limited by MC. We have to
set the distribution size for each TC to support multiple RXQs per TC.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Discriminate between IPv4 and IPv6 in generic IP flow setup.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If entry size is not bigger than 27, MC alloc one TCAM entry,
otherwise, alloc 2 TCAM entries.
Extracts size by HW must be not bigger than TCAM entry size(27 or 54).
So define the flow entry size as 54.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Calculate QoS/FS entry index by group and priority of flow.
1)The less index of entry, the higher priority of flow.
2)Verify if the flow with same group and priority has been added before
creating flow.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Define extracts support for each protocol and check the fields of each
pattern before building extracts of QoS/FS table.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1) Support QoS extracts and TC extracts for multiple TCs.
2) Protocol type of L2 extract is used to parse L3.
Next protocol of L3 extract is used to parse L4.
3) generic IP key extracts instead of IPv4 and IPv6 respectively.
4) Special for IP address extracts:
Put IP(v4/v6) address extract(s)/rule(s) at the end of extracts array
to make rest fields at fixed position.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Dynamic flow used instead of layout defined.
The actual key/mask size depends on protocols and(or) fields
of patterns specified.
Also, the key and mask should start from the beginning of IOVA.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enabled set link status API to start/stop phy
device from application.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enable/disable link state interrupt and get link state api is
defined using IOCTL calls from kernel driver
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Minimize the number of different thread variables
Add all the thread specific variables in dpaa_portal
structure to optimize TLS Usage.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
For DPAA devices the memory maps stored in the FMAN interface
information is per process. Store them in the device process specific
area.
This is required to support multi-process apps.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables the packet timestamping
conditionally when Rx offload is enabled for timestamp.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
On DPAA fd offset is 9 bits, but we are using uint8_t in the
SG case. This patch fixes the same.
Fixes: 8cffdcbe85 ("net/dpaa: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables flow query function to get the
configuration of the specified rule.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The legacy filter API will be superseded by rte_flow.
There are also several small features which can not be
implemented in rte_flow. This patch re-implemented these
features as private API.
Two APIs are added:
rte_pmd_ixgbe_get_fdir_info.
rte_pmd_ixgbe_get_fdir_stats.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The legacy filter API will be superseded by rte_flow.
There are also several small features which can not be
implemented in rte_flow. This patch re-implemented these
features as private API.
Three APIs are added:
rte_pmd_i40e_get_fdir_info.
rte_pmd_i40e_get_fdir_stats.
rte_pmd_i40e_set_gre_key_len.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
This patch enables cloud filter for IPv4/6_UDP/TCP/SCTP with
SRC port only or DST port only.
This supports different filter types for the same packet type.
E.g. one IPv4_UDP rules with SRC port only and another IPv4_UDP rule
with DST port only.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add FDir support for MAC_IPV4_GTPU and MAC_IPV6_GTPU type with outer
IPv4/IPv6 address, teid and qfi fields matching. Note that outer IPv4
and IPv6 matching fields here include both SRC & DST of both IPv4 &
IPv6.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add FDir support for MAC_IPV4_GTPU and MAC_IPV6_GTPU type with outer
IPv4/IPv6 address, teid and qfi fields matching. Note that outer IPv4
and IPv6 matching fields here include both SRC & DST of both IPv4 &
IPv6.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables FDIR with src mac filter and change the logic for
only supporting ether type field without IP pattern. Application may
set ether type with IP. It is redundant for flow, ignore ether type
except for ICE_FLTR_PTYPE_NON_IP_L2.
Also, remove redundant code for checking next_type.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If we download a NVGRE rule like "eth / ipv4 / nvgre / eth / ipv4 src
is 192.168.1.2 dst is 192.168.1.3 / end actions queue index 3 / end"
the special word will not be added because of rm->n_grp_count = 1,
so we have to change the ice_add_special_words() function before
ice_create_recipe_group(), then the special words will be add
into rm->rg_list.
Btw, the flag match_tun_mask is useless now and no need to add special
words in function ice_add_sw_recipe().
Fixes: eda40e22b8 ("net/ice/base: improve switch chained recipe")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fix tunnel type check for PPPoE type of recipe
when search for recipe which has been created before, and
also fix a bug of typo.
Fixes: 418d2563d1 ("net/ice/base: get tunnel type for recipe")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds support reply-ack vhost-user protocol
feature, which is for now only used to ensure
VHOST_USER_SET_MEM_TABLE requests are handled by the
slave, but later will be used for VHOST_USER_SET_STATUS.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch adds support for Vhost-user protocol features.
It is required to support protocol features that were not in
initial Vhost-user specification, such as reply-ack, MTU...
Also, this patch prevents Virtio multiqueue feature negotiation
if the slave does not support MQ protocol feature as stated
in Vhost-user specification:
"The multiple queues feature is supported only when the protocol
feature ``VHOST_USER_PROTOCOL_F_MQ`` (bit 0) is set."
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Restrict pointer aliasing to allow the compiler to vectorize loop
more aggressively.
With this patch, a 9.6% improvement is observed in throughput for
the packed virtio-net PVP case, and a 2.8% improvement in throughput
for the packed virtio-user PVP case. All performance data are measured
on ThunderX-2 platform under 0.001% acceptable packet loss with 1 core
on both vhost and virtio side.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
Restrict pointer aliasing to allow the compiler to vectorize loops
more aggressively.
With this patch, a 9.6% improvement is observed in throughput for
the virtio-net PVP case, and a 2.4% perf improvement in throughput
for the virtio-user PVP case. All performance data are measured
on ThunderX-2 platform under the 0.001% acceptable packet loss with
2 cores on the vhost side and 1 core on the virtio side.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
The 'restrict' keyword is recognized in C99, while type qualifier
'__restrict' compiles ok in C with all language levels. This patch
is to replace the existing 'restrict' with '__rte_restrict' which
is a common wrapper supported by all compilers.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Based on hns3 network engine, in order to configure hardware VLAN insert
offload in Tx direction, PMD driver reads the VLAN tags from the
vlan_tci_outer and vlan_tci of the structure rte_mbuf, fills them into
the Tx Buffer Descriptor and sets the related offload flag for every
packet.
Currently, there are two VLAN related problems in the 'tx_pkt_burst' ops
implementation function:
1) When setting the related offload flag, PMD driver inserts the VLAN
tag into the position that close to L3 header. So, when upper
application sends a packet with a VLAN tag in the data buffer, the
VLAN offloaded by hardware will be added to the wrong position. It is
supposed to add the VLAN tag from the rte_mbuf to the position close
to the MAC header in the packet when using VLAN insertion.
And when PF PVID is enabled by calling the API function named
rte_eth_dev_set_vlan_pvid or VF PVID is enabled by hns3 PF kernel
ether driver, the VLAN tag from the structure rte_mbuf to enable the
VLAN insertion should be filled into the position that close to L3
header to avoid to be overwritten by the PVID which will always be
inserted in the position that close to the MAC address.
2) When sending multiple segment packets, VLAN information is required
to be filled into the first Tx Buffer descriptor. However, currently
hns3 PMD driver incorrectly placed it in the last Tx Buffer
Descriptor. This results in VLAN insert offload failure when sending
multiple segment packets.
This patch fixed them by filling the VLAN information into the position
of the Tx Buffer Descriptor.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch fixes up paylen calculation twice when processing TSO request
in the '.tx_pkt_burst' ops implementation function to avoid performance
loss.
Fixes: 6dca716c9e ("net/hns3: support TSO")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Currently, there is a coverity defect warning about hns3 PMD driver, the
detail information as blow:
CID 289969 (#1 of 1): Unchecked return value (CHECKED_RETURN)
1. check_return: Calling rte_mp_action_register without checking return
value (as is done elsewhere 11 out of 13 times).
The problem is that missing checking the return value of calling the API
rte_mp_action_register during initialization. If registering an action
function for primary and secondary communication failed, the secondary
process can't work properly.
This patch fixes it by adding check return value of the API function
named rte_mp_action_register in the '.dev_init' implementation function
of hns3 PMD driver.
Coverity issue: 289969
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
PF could add or delete a RSS rule base on the PF's hash capability.
Some new rss input set will be supported, the protocols as below:
eth/vlan/l2tpv3/esp/ah/pfcp.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support hash flow for the new protocols of GTPU_EH UPLINK, GTPU_EH
DOWNLINK and GTPU_IP.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Refactor hash flow by change the action parser and clean some code.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some new hash flow will be supported to expend the flow hash
capability, the input set are the session id for NAT-T ESP protocol,
the l3 src/dst and the teid for GTPU_IP protocol.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Previous iavf not support 5 tuple hash, this patch aims to enable it
for regular ip pattern and also GTPU inner ip pattern, the 5 tuple
involves ip src and ip dst, tcp sport and tcp dport, udp sport and
udp dport and protocol id.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Refactor hash flow by change the process of the pattern parser and the
action parser, and refine the lookup table for regular IP and GTPU_EH,
ETH, and also VLAN.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The codes has been exposed correctly, so remove pre-processor tags.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Defined DPGFR, Dynamic Power Gate Force Control Register.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add new device ID for Alder Lake brand.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add support to a new MAC type (for Nahum10).
Signed-off-by: Roman Fridlyand <roman.fridlyand@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Adding defines for FEXTNVM8 and FEXTNVM12 registers with new masks for
future use.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Customers had a problem with large pings after connected standby.
This is due to the requirement of maintaining link after CS - the driver
blocks resets during "AdapterStart" and skips flow control setup.
Added condition in e1000_setup_link_ich8lan.c function that always setup
flow control, and setup physical interface only when no need to block
resets.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
VLAN filtering using the VFTA (VLAN Filter Table Array) and
should be initialized prior to setting rx mode.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
As it stands now, this fix will not change the current functionality
of the code. In addition, we remove the comment that seemed to be
a copy/paste from a separate implementation.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Future extended NVM 5 (five) required for a Dynamic Power Gating
control in the MAC.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Due timing issues in WHL and since recovery by host is
not always supported, increased timeout for Manageability Engine(ME)
to finish Ultra Low Power(ULP) exit flow for Nahum before timer expiration.
Signed-off-by: Nir Efrati <nir.efrati@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Added defines for the EEC, SHADOWINF and FLFWUPDATE registers needed for
the nvmupd_validate_offset function to correctly validate the NVM update
offset.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Now the functions are being accessed outside of the file, we need
to properly expose them for silicon families to use.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Fix typo in piece of code of NVM access for SPT.
And cleans up the remaining instances in the shared code
where it was not adhering to the Linux code standard.
Wrong description was found in the mentioned file, so fix them.
Remove shadowing variable declarations.
Relating to operands in bitwise operations having different sizes.
Unreachable code since *clock_in_i2c_* always return success.
Don't return unused s32 and don't check for constants.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Found some inconsistent code comments when it came to when we "fall
through", so made them more consistent and non-repetitive.
This patch adds/changes fall through comments to address new warnings
produced by gcc 7.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Add support SF/FW synchronization.
Add support to print PBA when using flashless.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Introduce flags to make flexible adjusting
number of outstanding requests.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This patch contains a preliminary support for new LAN device ID.
Signed-off-by: Lotem Leder <lotem.leder@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
This code is required for the update for system clock.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
When RSS init, because of profile overlap, the GTPU_IPV4 packets
don't hit GTPU_INNER_IPV4 profile which causes no hash value. Because
of no PPPoE profile, the PPPoE packets also has no hash value. This
patch solves this issue by pulling GTPU_IPV4 profile into inner ipv4
group and creating related PPPoE profile at the same time.
Fixes: 4717a12cfa ("net/ice: initialize and update RSS based on user config")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When create a RSS rule with void action, the error log is "Invalid
input set". This patch fix the issue by adding check for the type of
first actions item.
Fixes: 7615a68950 ("net/ice: rework for generic flow enabling")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables PPPoE control packets with src mac and session id
and PPPoE data packets with ip address and L4 port in rte_flow.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use the flow counter manager to fetch the accumulated stats for
a flow.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The Flow counter manager allocates memory to hold the software view
of the counters where the on-chip counter data will be accumulated
along with another memory block that will be shadowing the on-chip
counter data i.e where the raw counter data will be DMAed into from
the chip.
It also keeps track of the first HW counter ID as that will be needed
to retrieve the counter data in bulk using a TF API. It issues this cmd
in an rte_alarm thread that keeps running every second.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, only vfrep transmit requires cfa_action to be filled
in the tx buffer descriptor. However with truflow, dpdk(non vfrep)
to port also requires cfa_action to be filled in the tx buffer
descriptor.
This patch uses the correct cfa_action pointer while transmitting
the packet. Based on whether the packet is transmitted on non-vfrep
or vfrep, tx_cfa_action or vfr_tx_cfa_action inside txq will be
filled in the tx buffer descriptor.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Invoked 3 new APIs for the default flow create/destroy and to get
the action ptr for a default flow.
Changed ulp_intf_update() to accept rte_eth_dev as input and invoke
the same from the VF rep start function.
ULP Mark Manager will indicate if the cfa_code returned in the
Rx completion descriptor was for one of the default flow rules
created for the VF representor conduit. The mark_id returned
in such a case would be the VF rep's DPDK Port id, which can be
used to get the corresponding rte_eth_dev struct in bnxt_vf_recv
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The support for VF representor and counters is added to the
ulp templates.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Default rules are needed for the packets to be punted between the
following entities in the non-offloaded path
1. Device PORT to DPDK App
2. DPDK App to Device PORT
3. VF Representor to VF
4. VF to VF Representor
This patch fills all the relevant information in the computed fields
& the act_prop fields for the flow mapper to create the necessary
tables in the hardware to enable the default rules.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Representor dev-args need to be parsed during pci probe as they determine
subsequent probe of VF representor ports as well.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When VF-VFR conduits are created, a mark is added to the mark database.
mark_flag indicates whether the mark is valid and has VFR information
(VFR_ID bit in mark_flag). Rx path was checking for this VFR_ID bit.
However, while adding the mark to the mark database, VFR_ID bit is not
set in mark_flag.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add "enum bnxt_ulp_intf_type” as the second parameter for the
port & func helper functions
2. Return vfrep related port & func information in the helper functions
3. Allocate phy_port_list dynamically based on port count
4. Introduce ulp_func_id_tbl array for book keeping func related
information indexed by func_id
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for conditional execution of the mapper tables so that
actions like count will have table processed only if action count
is configured.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for the global resource templates, so that they
can be reused by the other regular templates.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Extended the regfile and computed field operations to a common
index opcode operation and added globlal resource operations are
also part of the index opcode operation.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The vector mode in the tx handler is disabled when truflow is
enabled since truflow now requires bd action record support.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for if table processing in the ulp mapper
layer. This enables support for the default partition action
record pointer interface table.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Modifications to allow internal encap records to be supported:
- Modified the mapper index table processing to handle encap without an
action record
- Modified the session open code to reserve some 64 Byte internal encap
records on tx
- Modified the blob encap swap to support encap without action record
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Select EEM Host or System memory via config parameter
- Add EEM system memory support for kernel memory
- Dependent on DPDK changes that add support for the HWRM_OEM_CMD.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
- Add support to update global configuration for ACT_TECT
and ACT_ABCR.
- Add support to allow Tunnel and Action global configuration.
- Remove register read and write operations.
- Remove the register read and write support.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Link external action alloc and free to new hcapi interface
- Add parameter range checking
- Fix issues with index allocation check
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Remove table scope data from session. Added to EEM.
- Complete move to RM of table scope base and range.
- Fix some err messaging strings.
- Fix the tcam logging message.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- For the EM Module there is a need to only allocate the EM Records in
HCAPI RM but the storage control is requested to be outside of the RM
DB.
- Add TF_RM_ELEM_CFG_HCAPI_BA.
- Return error when the number of reserved entries for wc tcam is odd
number in tf_tcam_bind.
- Remove em_pool from session
- Use RM provided start offset and size
- HCAPI returns entry index instead of row index for WC TCAM.
- Move resource type conversion to hrwm set/free tcam functions.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Move bulk table get implementation to new Tbl Module design.
- Update messages for bulk table get
- Retrieve specified table element using bulk mechanism
- Remove deprecated resource definitions
- Update device type configuration for P4.
- Update RM DB HCAPI count check and fix EM internal and host
code such that EM DBs can be created correctly.
- Update error logging to be info on unbind in the different modules.
- Move RTE RSVD out of tf_resources.h
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Support for table scope within the EM module
- Support for host and system memory
- Update TCAM set/free.
- Replace TF device type by HCAPI RM type.
- Update TCAM set and free for HCAPI RM type
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Allow TCAM indexes to be allocated from top or bottom.
If the priority is set to 0, allocate from the
lowest tcam indexes i.e. from top. Any other value,
allocate it from the highest tcam indexes i.e. from
bottom.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add residual checker to the TF Host RM as well as new RM APIs. On
close it will scan the DB and check of any remaining elements. If
found they will be logged and FW msg sent for FW to scrub that
specific type of resources.
- Update the module bind to be aware of the module type, for each of
the modules.
- Add additional type 2 string util functions.
- Fix the device naming to be in compliance with TF.
- Update the device unbind order as to assure TCAMs gets flushed
first.
- Update the close functionality such that the session gets
closed after the device is unbound.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add Identifier L2 CTXT Remap to the P4 device and updated the
cfa_resource_types.h to get the type support.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Implement the Identifier, Table Type and the Resource Manager
modules.
Integrate Resource Manager with HCAPI.
Update open/close session.
Move to direct msgs for qcaps and resv messages.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Move External Exact and Exact Match to device module using HCAPI
to add and delete entries
- Make EM active through the device interface.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Allow TCAM indexes to be allocated from top or bottom.
If the priority is set to 0, allocate from the
lowest tcam indexes i.e. from top. Any other value,
allocate it from the highest tcam indexes i.e. from
bottom.
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Implement the modules RM, Device (WH+), Identifier.
- Update Session module.
- Implement new HWRMs for RM direct messaging.
- Add new parameter check macro's and clean up the header includes for
i.e. tfp such that bnxt.h is not directly included in the new modules.
- Add cfa_resource_types, required for RM design.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add new bulk table type get using FW
to DMA the data back to host.
- Add flag to allow records to be cleared if possible
- Set mirror using tf_alloc_tbl_entry
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Introduce new modules for Device, Resource Manager, Identifier,
Table Types, and TCAM for multi device support.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Modify Exact Match insert and delete to use the HWRM messages directly.
Remove tunneled EM insert and delete message types.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add Exact Match support
- Create EM table pool of memory indices
- Insert exact match internal entry API
- Sends EM internal insert and delete request to firmware
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Apart from func_svif, func_id & vnic, port_db now stores and
retrieves func_spif, func_parif, phy_port_id, port_svif, port_spif,
port_parif, port_vport. New helper functions have been added to
support the same.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Issue HWRM_PORT_PHY_QCAPS to the firmware to get the physical
port count of the device.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
add helper functions to get port & function related information
like parif, physical port id & vport id.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to query parent PF information (MAC address,
function ID, port ID and default VNIC) from firmware.
Current firmware returns zero for parent default vnic,
a temporary Wh+-specific workaround is included until
that can be fixed.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use 'first_vf_id' and the 'vf_id' that is input as part of adding
a representor to obtain the PCI function ID(FID) of the VF(VFR endpoint).
Use the FID as an input to FUNC_QCFG HWRM cmd to obtain the default
vnic ID of the VF.
Along with getting the default vNIC ID by supplying the FW FID of
the VF-rep endpoint to HWRM_FUNC_QCFG, obtain and store it's
function svif.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added code to support Tx/Rx from a VF representor port.
The VF-reps use the RX/TX rings of the Trusted VF/PF.
For each VF-rep, the Trusted VF/PF driver issues a VFR_ALLOC FW cmd that
returns "cfa_code" and "cfa_action" values.
The FW sets up the filter tables in such a way that VF traffic by
default (in absence of other rules) gets punted to the parent function
i.e. either the Trusted VF or the PF.
The cfa_code value in the RX-compl informs the driver of the source VF.
For traffic being transmitted from the VF-rep, the TX BD is tagged with
a cfa_action value that informs the HW to punt it to the corresponding
VF.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Defines data structures and code to init/uninit
VF representors during pci_probe and pci_remove
respectively.
Most of the dev_ops for the VF representor are just
stubs for now and will be will be filled out in next patch.
To create a representor using testpmd:
testpmd -c 0xff -wB:D.F,representor=1 -- -i
testpmd -c 0xff -w05:02.0,representor=[1] -- -i
To create a representor using ovs-dpdk:
1. First add the trusted VF port to a bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0
2. Add the representor port to the bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0,representor=1
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When flow is inserted with meta match item it requires a certain
register support.
As part of the flow validation of such flows, the validation
function is missing a check that the mlx5 driver is not in
legacy mode in terms of extended meta data support
(MLX5_XMETA_MODE_LEGACY flag).
If the driver is in legacy mode it will cause downstream
function that allocates needed register for meta data.
The fix checks explicitly the conditions for support of
meta data in FDB mode. If the conditions are not met
an error message will be issued.
Fixes: 9bf26e1318 ("ethdev: move egress metadata to dynamic field")
Cc: stable@dpdk.org
Signed-off-by: Shy Shyman <shys@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch add the total input set byte number check,
as there is a hardware requirement for the total number
of 32 byte.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add more specific tunnel type for ipv4/ipv6 packet,
it enable tcp/udp layer of ipv4/ipv6 as L4 payload but without
L4 dst/src port number as input set for the switch filter rule.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add check for protocol type of IPv4 packet,
it need to update tunnel type when NVGRE is in payload.
Fixes: 6bc7628c5e ("net/ice: change default tunnel type")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add more support for switch parser of PPPoE packet,
it enable parse tcp/udp L4 layer and ipv4/ipv6 L3 layer parser for
PPPoE payload, so we can use L4 dst/src port and L3 ip address as
input set for switch filter PPPoE related rule.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the build error in DCF when CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC
compilation option is enabled. Legacy 16 byte Rx descriptor is not
supported in DCF. If it is enabled, DCF configuration stops.
Fixes: 929eceefab ("net/ice: add queue start and stop for DCF")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the filter rule needs to use the TCAM method, driver
enables the TCAM filter switch, otherwise disables it, which
can improve the performance of microcode in FDIR scenarios that
does not use TCAM method.
Fixes: 1fe89aa37f ("net/hinic: add flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When setting promiscuous or allmulticast mode, increase
multi-thread resource protection, because the patch
"net/bonding: prefer allmulti to promiscuous for LACP"
adds trying to use allmulti when adding a slave, and
EVS bond driver also sets promisc with another thread,
which may lead to thread reentry and cause failure to
set promiscuous mode.
Fixes: cb7b6606eb ("net/hinic: add RSS stats and promiscuous ops")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add output buffer and out size info for some cmds that use management
sync channel, which can improve dfx capability when sent msg failed.
Fixes: 7fcd6b05b9 ("net/hinic/base: support cmdq mechanism")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add device arguments to lock Rx/Tx contexts.
Application can either choose to lock Rx or Tx contexts by using
'lock_rx_ctx' or 'lock_tx_ctx' respectively per each port.
Example:
-w 0002:02:00.0,lock_rx_ctx=1 -w 0002:03:00.0,lock_tx_ctx=1
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Because of the hardware constraints, hns3 network engine doesn't support
sending packets with more than eight fragments. And hns3 pmd driver
tries to reassemble these kind of packets to meet hardware requirements.
Currently, there are two problems:
1) when the input buffer_len * 8 < pkt_len, the packets are impossible
to be reassembled into 8 Buffer Descriptors. In this case, the
packets will be passed to hardware, which eventually causes a
hardware reset.
2) The meta data in origin packets which are required to fill into the
descriptor haven't been copied into the reassembled pkts.
This patch adds a check for 1) to ensure such packets will be dropped by
driver and copies useful meta data from the origin packets to the
reassembled packets.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Currently, rx_buf_size of hns3 PMD driver is fixed on, and it's value
depends on the firmware which will decrease the flexibility of PMD.
The receive side mbufs was allocated from the mempool given by upper
application calling rte_eth_rx_queue_setup API function. So the memory
chunk used for net device DMA is depend on the data room size of the
objects in this mempool. Hns3 PMD driver should set the rx_buf_len
smaller than the data room size of mempool and our hardware only support
the following four specifications: 512, 1024, 2148 and 4096.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
According to the user manual of Kunpeng920 SoC, the max allowed number
of segments per whole packet is 63 and the max number of segments per
packet is 8 in datapath.
This patch reports the Two segment parameters of Tx descriptor
limitations to DPDK framework.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When the last driver exits abnormally, for example, it is killed by
'kill -9', it may be too late to clear the configuration and cause the
configuration to remain. Therefore, to ensure that the hardware
environment is clean during initialization, the PF driver actively clear
the hardware environment during initialization, including PF and
corresponding VFs' vlan, mac, flow table configurations, etc.
Fixes: d51867db65 ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
This patch optimizes the code to get device capability in primary
process, and moves the code of getting PCI revision id in order to avoid
evaluating the private hw->revision of shared PMD-specific private data
in slave process.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
This patch adds support setting VF PVID by hns3 PF kernel ethdev driver
on the host by "ip link set <eth num> vf <vf id> vlan <vlan tag>"
command.
Because of the hardware constraints, the striped VLAN tag will always in
Rx descriptors which should has been dropped when PVID is enabled and
the PVID will overwrite the outer VLAN tag in Tx descriptor. So, hns3
PMD driver need to change the processing of VLAN tags in the process of
Tx and Rx according to whether PVID is enabled.
1) If the hns3 PF kernel ethdev driver sets the PVID for VF device
before the initialization of the related VF device, hns3 VF PMD
driver should get the PVID state from PF driver through mailbox and
update the related state in txq and rxq maintained by hns3 VF driver
to change the process of Tx and Rx.
2) If the hns3 PF kernel ethdev driver sets the PVID for VF device after
initialization of the related VF device, the PF driver will notify VF
driver to update the PVID state. The VF driver will update the PVID
configuration state immediately to ensure that the VLAN process in Tx
and Rx is correct. But in the window period of this state transition,
packets loss or packets with wrong VLAN may occur.
3) Due to hardware limitations, we only support two-layer VLAN hardware
offload in Tx direction based on hns3 network engine, so when PVID is
enabled, QinQ insert is no longer supported. And when PVID is
enabled, in the following two cases:
i) packets with more than two VLAN tags.
ii) packets with one VLAN tag while the hardware VLAN insert is
enabled.
The packets will be regarded as abnormal packets and discarded by
hardware in Tx direction. For debugging purposes, a validation check
for these types of packets is added to the '.tx_pkt_prepare' ops
implementation function named hns3_prep_pkts to inform users that
these packets will be discarded.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Currently, hns3 PMD driver needs know the PVID configuration state and
do different processing in the 'rx_pkt_burst' ops implementation
function.
This patch adds a member to struct hns3_rx_queue/hns3_tx_queue of the
driver to indicate the PVID configuration status, so it isn't need
to access other data structure in the 'rx_pkt_burst' ops implementation,
to avoid performance loss because of reducing cache miss.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
