The legacy filter API, including rte_eth_dev_filter_supported() and
rte_eth_dev_filter_ctrl() is removed. Flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
With removal of old close behavior, the private
port resources must be released in the .dev_close callback.
Freeing of port private resources is moved from
the ".remove(device)" to the ".dev_close(port)" operation
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Dpaa2 pmd has no need to bound host interface
for which we require if_index field.
Setting it to 0 as unused.
Fixes: 3e5a335d3f88 ("net/dpaa2: add basic operations")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch is a preparation to hide the 'struct eth_dev_ops' from
applications by moving some device operations from 'struct eth_dev_ops'
to 'struct rte_eth_dev'.
Mentioned ethdev APIs are in the data path and implemented as inline
because of performance reasons.
Exposing 'struct eth_dev_ops' to applications is bad because it is a
contract between ethdev and PMDs, not really needs to be known by
applications, also changes in the struct causing ABI breakages which
shouldn't.
To be able to both keep APIs inline and hide the 'struct eth_dev_ops',
moving device operations used in ethdev inline APIs to 'struct
rte_eth_dev' to the same level with Rx/Tx burst functions.
The list of dev_ops moved:
eth_rx_queue_count_t rx_queue_count;
eth_rx_descriptor_done_t rx_descriptor_done;
eth_rx_descriptor_status_t rx_descriptor_status;
eth_tx_descriptor_status_t tx_descriptor_status;
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
DEV_RX_OFFLOAD_TIMESTAMP is per port, so the internal implementation
shall enable it on per port basis only.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This experimental API is no longer required as the same
purpose can be solved with standard DEV_RX_OFFLOAD_TIMESTAMP
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Currently, there is a potential problem that calling the API function
rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
driver does not support. If the PMD driver does not support certain VLAN
hardware offloads and does not check for it, the hardware setting will
not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
will be turned on.
It is supposed to check the hardware capabilities to decide whether the
relative callback needs to be called just like the behavior in the API
function named rte_eth_dev_configure. And it is also needed to cleanup
duplicated checks which are done in some PMDs. Also, note that it is
behaviour change for some PMDs which simply ignore (with error/warning
log message) unsupported VLAN offloads, but now it will fail.
Fixes: a4996bd89c42 ("ethdev: new Rx/Tx offloads API")
Fixes: 0ebce6129bc6 ("net/dpaa2: support new ethdev offload APIs")
Fixes: f9416bbafd98 ("net/enic: remove VLAN filter handler")
Fixes: 4f7d9e383e5c ("fm10k: update vlan offload features")
Fixes: fdba3bf15c7b ("net/hinic: add VLAN filter and offload")
Fixes: b96fb2f0d22b ("net/i40e: handle QinQ strip")
Fixes: d4a27a3b092a ("nfp: add basic features")
Fixes: 56139e85abec ("net/octeontx: support VLAN filter offload")
Fixes: ba1b3b081edf ("net/octeontx2: support VLAN offloads")
Fixes: d87246a43759 ("net/qede: enable and disable VLAN filtering")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Default distribution size of TC is 1, which is limited by MC. We have to
set the distribution size for each TC to support multiple RXQs per TC.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Calculate QoS/FS entry index by group and priority of flow.
1)The less index of entry, the higher priority of flow.
2)Verify if the flow with same group and priority has been added before
creating flow.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Define extracts support for each protocol and check the fields of each
pattern before building extracts of QoS/FS table.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1) Support QoS extracts and TC extracts for multiple TCs.
2) Protocol type of L2 extract is used to parse L3.
Next protocol of L3 extract is used to parse L4.
3) generic IP key extracts instead of IPv4 and IPv6 respectively.
4) Special for IP address extracts:
Put IP(v4/v6) address extract(s)/rule(s) at the end of extracts array
to make rest fields at fixed position.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables the packet timestamping
conditionally when Rx offload is enabled for timestamp.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Currently rte_mcp_ptr_list is being shared as a variable
across libs. This is only used in control path.
This patch change it to a exported function based access.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
When using a single TC, flow id is same as congestion group id.
However in case of multiple traffic classes, same flow id values
are used within each traffic class, which causes incorrect
traffic behavior e.g. halting of traffic.
This patches changes to use the cgid as the index which works
for single as well as multiple traffic classes.
Fixes: 13b856ac02a8 ("net/dpaa2: support taildrop on frame count basis")
Cc: stable@dpdk.org
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Update the portal allocation failure log to print the thread id
as well.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds default/preferred rx/tx params in dev info,
specially the advertised burst size.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fixed 10G port negotiation issue with another 10G/non 10G port.
When running testpmd with 10G interfaces on 10BaseT interface
on LS2088ARDB, the ports were showing link as down.
This was identified to be caused by the setting of link as down
during config.
Also, the line rate was not being updated in device link params,
thus having the incorrect link speed in status (as 0).
Fixes: c5acbb5ea20e ("net/dpaa2: support link status event")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The JUMBO frame handling in dpaa2_dev_mtu_set api was not correct.
When frame_size is greater than RTE_ETHER_MAX_LEN, the
intention is to add JUMBO flag in rx offload while it was resetting
all other flags other than JUMBO as AND operator was used instead of OR.
Fixes: 0ebce6129bc6 ("net/dpaa2: support new ethdev offload APIs")
Cc: stable@dpdk.org
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Reviewed-by: Gagandeep Singh <g.singh@nxp.com>
Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MC firmware is the core component of FSLMC bus and net/DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Earlier, there was a single MCP handle which was available across
complete DPAA2 driver as well as part of the dev_private which was
shared by the secondary process.
For secondary, that is not valid and it would require to open its
own handle for the MC. This is eventually used as part of the DPNI
configuration.
By using the process_private member of the rte_eth_dev, it is
possible to keep separate handles per process. Without worry of
overwriting when secondary process accesses the dev_private.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch adds the support for PTP driver for
DPAA2 devices.
To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IEEE1588 driver needs timestamp of packets.
For DPAA2, the timestamp of TX packets is
stored in annotation area of corresponding
TX confirmation packet.
This patch enables timestamp fields in
annotation area and TX confirmation mode if
CONFIG_RTE_LIBRTE_IEEE1588 is set in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TX confirmation mode provides dedicated confirmation
queues for transmitted packets. These queues are used
by software to get the status and release
transmitted packets buffers.
By default TX confirmation mode is kept disabled.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The existing taildrop was based on queue data size.
This patch replaces it with frame count bases using
CGR methods of DPAA2 device.
The number of CGRs are limited. So,
- use per queue CGR based tail drop for as many as CGR
available.
- Remaining queues shall use the legacy byte based tail drop
Number of CGRs can be controlled by dpl file during dpni_create.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When we need particular number of packets from the rx routine,
which would change in every call, we cannot prefetch the packets
and provide previous results to the user.
User can select the mode by using devargs for non prefetch mode.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
