A new generic shared actions API may be used to create shared
counter. There is no point to keep duplicate COUNT action specific
capability to create shared counters.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
PMD can support vector mode when jumbo is enabled as long as MTU is not
large enough to require scattered RX (which also depends on the mbuf size).
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There are common problems with VFIO that get asked over and over on the
mailing list. Document common problems with VFIO and how to fix them or
at least figure out what went wrong.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Currently, we have no documentation on how to use VFIO in no-IOMMU mode.
Add such documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Make sure that we always prioritize VFIO over UIO. Also, minor wording
corrections and improvements.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, the Linux GSG mentions UIO drivers first. This is not ideal
as for the longest time, the recommended way to use DPDK with hardware
devices has been to use VFIO driver.
This commit simply moves UIO section after VFIO, with minor edits.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This old script relied on deprecated stuff, and especially make.
It also applied some scary 666 permissions on files under /dev/vfio.
Its deprecation had been notified in a previous release, remove it.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Current information regarding hugepage usage is a little out of date.
Update it to include information on in-memory mode, as well as on
default mountpoints provided by systemd.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The current instructions are slightly out of date when it comes to
providing information about setting up the system for using DPDK as
non-root, so update them.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Clarify the ABI reference version (DPDK_ABI_REF_VERSION) tag, to use
when testing builds with devtools/test-meson-builds.sh before
submitting patches.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fix grammar, spelling and formatting of DPDK 20.11 release notes.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
DPDK has been using meson 0.47 for some time now, so we can safely
remove the note calling out this fact.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
DPDK relies on pkg-config(1) to provide correct parameters for
compiler and linker used in application build. Inaccurate build
parameters, produced by pkg-config from DPDK .pc files could fail
application build or cause unpredicted results during application
runtime.
Update system requirements doc about a bug in pkg-config v0.27
used in RHEL-7.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The compilation of the kernel module KNI is optional.
The kernel headers should not be required for DPDK compilation.
Fixes: 91a861e54164 ("config: disable Linux kernel modules by default")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The documentation file contains some broken links to Mellanox's site.
Also now BlueField-2 platform is supported.
This patch provides new links and adds documentation for
BlueField-2 platform.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
In DPDK 20.11 the following offload features are added:
* Buffer Split
* Sampling
* Tunnel offload
* 2-port hairpin
* RSS shared action
* Age shared action
Update the relevant tables with OFED/rdma-core/NIC versions.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
The mlx5 PMD supports various Rx burst functions.
Each function is enabled differently and supports different features.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Since the hns3 NIC hardware features are not counted
and it is supported in fact. Besides, the flow director
is not supported and need to delete it.
Fixes: fa29fe45a7b4 ("net/hns3: support queue start and stop")
Fixes: 521ab3e93361 ("net/hns3: add simple Rx path")
Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Fixes: 936eda25e8da ("net/hns3: support dump register")
Fixes: 53b9f2b9a560 ("doc: update feature list in hns3 guide")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently TRUFLOW is supported only on Whitney+ and Stingray devices.
Update the PMD doc with this info.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Devices belonging to BCM573xx and BCM5740x family will not be supported
from the 21.02 release.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove list of supported OS in PMD specific doc.
Documenting an unsupported version of OS makes more sense in
PMD specific docs.
Platforms tested with this device is documented in release notes anyway.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We should be encouraging the use of vfio-pci for developers, not telling
them to use igb_uio.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Update the pdump library programmers guide and Howto doc
with the use of multi process channel replacing socket
based communication.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This document never had any license or copyright on this file, add one.
Fixes: b932ebcb2664 ("doc: add NIC performance guide on Linux IA")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch corrects a grammatical error by changing 'an DPDK' to 'a DPDK',
so that the sentences can become grammatically accurate.
Fixes: 2e486e26328c ("doc: remove Intel references from linux guide")
Fixes: 48624fd96e7c ("doc: remove Intel references from prog guide")
Fixes: e0c7c4731957 ("doc: remove Intel references from sample apps guide")
Cc: stable@dpdk.org
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
There is a discrepancy between ethdev API and flow rules guide
regarding flow rules maintenance after port stop.
librte_ethdev.h declares that flow rules will not be stored in PMD
after port stop:
>>>>> Quote start
Please note that some configuration is not stored between calls to
rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration
will be retained:
- MTU
- flow control settings
- receive mode configuration (promiscuous mode, all-multicast mode,
hardware checksum mode, RSS/VMDQ settings etc.)
- VLAN filtering configuration
- default MAC address
- MAC addresses supplied to MAC address array
- flow director filtering mode (but not filtering rules)
- NIC queue statistics mappings
<<<< Quote end
PMD cannot always correctly restore flow rules after port stop / port
start because application may alter port configuration after port stop
without PMD knowledge about undergoing changes. Consider the
following scenario:
application configures 2 queues 0 and 1 and creates a flow rule with
'queue index 1' action. After that application stops the port and
removes queue 1.
Although PMD can implement flow rule shadow copy to be used for
restore after port start, attempt to restore flow rule from shadow
will fail in example above and PMD could not notify application about
that failure. As the result, flow rules map in HW will differ from
what application expects. In addition, flow rules shadow copy used
for port start restore consumes considerable amount of system memory,
especially in systems with millions of flow rules.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This is an improved version of the setup of huge pages
bases on earlier DPDK setup.
Differences are:
* autodetects NUMA vs non NUMA
* allows setting different page sizes
recent kernels support multiple sizes.
* accepts a parameter in bytes (not pages).
* can display current hugepage settings.
Most users will just use --setup argument but if necessary
the steps of clearing old settings and mounting/umounting
can be done individually.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
mlx5 PMD refuses to update link state if link speed is defined but
status is down or if link speed is undefined but status is up, even if
the ioctl() succeeded.
This prevents application to detect link up/down event, especially when
the link speed is not correctly detected.
Commit [1] allowed returning unknown link speed, so now PMD allows
the return of unknown link speed in the above case.
Due to some old kernel driver bug, link speed wasn't detected properly.
[1] http://git.dpdk.org/dpdk/commit/?id=810b17d116f03
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
AF_XDP will not work on 32-bit kernels before version 5.4.
Document this restriction in the driver guide.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
This patch defines new RSS offload types for eCPRI. For eCPRI with
Message Type 0, the hash field is physical channel ID.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The changeset that introduced common flow API thread safety
in fact introduced double locking to this particular PMD as
RTE flow API implementation in the PMD has been thread-safe
since the day zero. State this by setting the corresponding
device flag to skip locking imposed by generic RTE flow API.
Fixes: 80d1a9aff7f6 ("ethdev: make flow API thread safe")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Update the user guide of ip pipeline sample application
to reflect the changes in command line arguments.
Fixes: 54a298e5f7f4 ("examples/ip_pipeline: update subport rate dynamically")
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Currently, when building sphinx documentation, the build will only
succeed if being run from the build system, because the conf.py script
expects DPDK_VERSION environment variable to be set, and crashes if it
is not.
However, there are certain external tools (such as sphinx documentation
preview extensions for certain IDE's) that use live preview and thus
rely on running their own sphinx commands. In these cases, it is useful
to permit building sphinx documentation without specifying the
DPDK_VERSION environment variable. The version string is the only thing
preventing manual sphinx build commands from working.
Fix the conf.py to use "None" as a version string in cases when
DPDK_VERSION environment variable is not set.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
-w option in this context is an application option for coremask.
Restore it.
Fixes: db27370b5720 ("eal: replace blacklist/whitelist options")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The words blacklist and whitelist are avoided in text
about MAC filtering or kernel module.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rename the enum values in the EAL include files.
As a backward compatible temporary migration tool, define
a replacement mapping for old values.
The old names relating to blacklist and whitelist are replaced
by block list and allow list, but applications may be using the
older compatibility macros, marked as deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add queue depth threshold and class of service sections
to DLB2 rst file.
Fixes: 5433956 ("event/dlb2: add eventdev probe")
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
