The crypto driver added new fields to the mkey attributes struct:
crypto_en and set_remote_rw.
The entire mkey struct was not initialized, only specific fields in it,
which caused the new added fields not to be initialized resulting in a
mkey creation error.
This is fixed by initializing the entire mkey attributes struct to 0
which will prevent this issue from reoccurring if any fields are added
to the mkey struct in the future.
Fixes: 0111a74e13dd ("common/mlx5: adjust DevX mkey fields for crypto")
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Originally, the default RSS for GTPU is inner fields. Now, we hope outer
RSS for GTPU to be the default.
Since RSS for IPv4, RSS for IPv6, RSS for UDP and RSS for TCP can cover
the cases of outer RSS for GTPU, this patch deletes redundant default
RSS configurations for GTPU.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To enable IP fragment RSS hash, ICE_FLOW_SEG_HDR_IPV_FRAG is added to the
IP RSS configuration template, together with ICE_FLOW_SEG_HDR_IPV_OTHER.
It will cause error when associating flow profile. And packet id field
for RSS is not correctly added when IP fragment is enabled. To fix this
issue, this patch only selects one of the above two segment header types
based on RSS types.
Fixes: f1ea76eb6394 ("net/ice: support RSS hash for IP fragment")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If vector mode is not allowed for Tx, no need to perform vector
related setup for Tx queue.
The patch deferred vector setup for Tx queue to the place that
vector mode is confirmed to be allowed.
Fixes: 28f9002ab67f ("net/ice: add Tx AVX512 offload path")
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This is reported by our internal covscan:
1. dpdk-20.11/drivers/net/ice/base/ice_switch.c:4214: sign_extension:
Suspicious implicit sign extension: "s_rule_size" with type "u16" (16
bits, unsigned) is promoted in "num_unicast * s_rule_size" to type "int"
(32 bits, signed), then sign-extended to type "unsigned long" (64 bits,
unsigned).
If "num_unicast * s_rule_size" is greater than 0x7FFFFFFF, the upper bits
of the result will all be 1.
# 4212| s_rule_size = ICE_SW_RULE_RX_TX_ETH_HDR_SIZE;
# 4213| s_rule = (struct ice_aqc_sw_rules_elem *)
# 4214|-> ice_calloc(hw, num_unicast, s_rule_size);
# 4215| if (!s_rule) {
# 4216| status = ICE_ERR_NO_MEMORY;
Even if this condition is not likely to happen, in any case, it is more
straightforward to rely on the existing rte_calloc.
Fixes: 5f0978e96220 ("net/ice/base: add OS specific implementation")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Test case setup should return -ENOTSUP, if it is not supported.
Fixes: 7d761b07fcf6 ("test/event: add unit tests for periodic timer")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The last lcore declared in the list is also a valid lcore in the list.
Fixes: 32d7dbf269be ("app/eventdev: fix overflow in lcore list parsing")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In function power_guest_channel_read_msg, 'lcore_id' is used before
validity check, which may cause buffer 'global_fds' accessed by index
'lcore_id' overflow.
This patch moves the validity check of 'lcore_id' before the 'lcore_id'
being used for the first time.
Fixes: 9dc843eb273b ("power: extend guest channel API for reading")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The documentation is generated in HTML only.
The PDF format is abandoned since DPDK 20.11
while dropping support of the make-based build.
This decision has been mentioned by the Technical Board:
https://mails.dpdk.org/archives/dev/2021-January/195549.html
Fixes: 3cc6ecfdfe85 ("build: remove makefiles")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Segmentation fault may occur without checking if memzone
reserves succeed or not.
Fixes: 50247fe03fe0 ("test/timer: exercise new APIs in secondary process")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Timer sample example assumes that the frequency of the timer is about
2Ghz to control the period of calling rte_timer_manage(). But this
assumption is easy to fail. For example. the frequency of tsc on ARM64
is much less than 2Ghz.
This patch uses the frequency of the current timer to calculate the
correct time interval to ensure consistent result on all platforms.
In addition, the rte_rdtsc() is replaced with the more recommended
rte_get_timer_cycles function in this patch.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, the mp uses gettimeofday() API to get the time, and used as
timeout parameter.
But the time which gets from gettimeofday() API isn't monotonically
increasing. The process may fail if the system time is changed.
This fixes it by using clock_gettime() API with monotonic attribution.
Fixes: 783b6e54971d ("eal: add synchronous multi-process communication")
Fixes: f05e26051c15 ("eal: add IPC asynchronous request")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
In the function __idxd_completed_ops() we have a parameter shadow warning
due to a local variable having the same name as one of the function
parameters. This issue is fixed by simply renaming the local variable.
This warning was caught when additions were made to the OVS codebase,
which include adding calls the IOAT APIs. The OVS build passes the
-Wshadow flag by default, allowing the warning to be seen when building
OVS with DPDK 21.05-rc2.
Fixes: 245efe544d8e ("raw/ioat: report status of completed jobs")
Reported-by: Sunil Pai G <sunil.pai.g@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds return value check for setting an attribute.
Fixes: 88a81bcecb7b ("raw/skeleton: remove compile-time constant for device id")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
For 32-bit targets, size_t is normally a 32-bit type and
does not have sufficient range to represent 64-bit offsets
that are needed when mapping PCI addresses.
Use uint64_t instead.
Found when attempting to run 32-bit Linux dpdk-testpmd
using VFIO driver:
EAL: pci_map_resource(): cannot map resource(63, 0xc0010000, \
0x200000, 0x20000000000): Invalid argument ((nil))
Fixes: c4b89ecb64ea ("eal: introduce memory management wrappers")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Sphinx 4.0 became stricter with permalink configuration:
"
html_add_permalinks has been deprecated since v3.5.0.
Please use html_permalinks and html_permalinks_icon instead.
"
The new variable is used while keeping compatibility
with older Sphinx versions.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Spotted by sparse in OVS build:
../../lib/netdev-dpdk.c: note: in included file (through
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_ip.h,
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h, ...):
../../include/sparse/arpa/inet.h:22:2: error: "Must include
<netinet/in.h> before <arpa/inet.h> for FreeBSD support"
This is a check enforced by OVS itself.
See [1] for some context.
1: https://github.com/openvswitch/ovs/commit/b2befd5bb2db
Fixes: 89813a522e68 ("net: provide IP-related API on any OS")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Spotted by sparse in OVS build:
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:789:27:
error: incorrect type in initializer (different base types)
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:789:27:
expected unsigned short [usertype] ether_type
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:789:27:
got restricted ovs_be16 [usertype]
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:829:25:
error: incorrect type in initializer (different base types)
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:829:25:
expected unsigned short [usertype] vlan_tci
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:829:25:
got restricted ovs_be16 [usertype]
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:830:26:
error: incorrect type in initializer (different base types)
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:830:26:
expected unsigned short [usertype] eth_proto
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:830:26:
got restricted ovs_be16 [usertype]
This was not caught before as no code in headers was using those fields.
This changed with commit 6f2168b69aee ("ethdev: reuse ethernet header
definition in flow item") and commit a56a262e3408 ("ethdev: reuse VLAN
header definition in flow item").
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_thash_adjust_tuple() uses random to generate a new subtuple if
fn() callback reports about collision. In some cases random changes
the subtuple in a way that after complementary bits are applied the
original tuple is obtained. This patch replaces random with subtuple
increment.
Fixes: 28ebff11c2dc ("hash: add predictable RSS")
Cc: vladimir.medvedkin@intel.com
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Tested-by: Stanislaw Kardach <kda@semihalf.com>
Reviewed-by: Stanislaw Kardach <kda@semihalf.com>
This is reported by our internal covscan:
1. dpdk-20.11/lib/librte_eal/common/eal_common_options.c:508: alloc_fn:
Storage is returned from allocation function "dlopen".
6. dpdk-20.11/lib/librte_eal/common/eal_common_options.c:508:
leaked_storage: Failing to save or free storage allocated by
"dlopen("librte_eal.so.21.0", 5)" leaks it.
# 506| * shared library is not already loaded i.e. it's
# statically linked.)
# 507| */
# 508|-> if (dlopen("librte_eal.so."ABI_VERSION, RTLD_LAZY |
# RTLD_NOLOAD) != NULL &&
# 509| *default_solib_dir != '\0' &&
# 510| stat(default_solib_dir, &sb) == 0 &&
This leak is not an issue per se, but on the other hand, this is easy
to fix and I prefer not having to waive this warning later.
Fixes: 06c7871dde01 ("eal: restrict default plugin path to shared lib mode")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If after a bus scan, there are no devices using a particular bus, then
that bus should not be taken into account when deciding whether DPDK
should be run in VA or PA addressing mode. This becomes an issue when
the DSA bus driver code is used on a system without an IOMMU. The PCI
bus correctly reports that it only works in PA mode, while the DSA bus -
also correctly - reports that it works only in VA mode. The difference
is that there will be no devices found in a scan for the DSA bus, since
the kernel driver can only present those to userspace in the presence of
an IOMMU.
While we could change DSA instance to always report that it does not
care about the addressing mode, this would imply that it could be used
with DPDK in PA mode which is not the case. Therefore, this patch
changes the driver to report DC (don't care) in the case where no
devices are present, and VA otherwise.
NOTE: this addressing mode use of VA-only applies only in the case of
using DSA through the idxd kernel driver. The use of DSA though vfio-pci
is unaffected and works as with other PCI devices.
Fixes: b7aaf417f936 ("raw/ioat: add bus driver for device scanning automatically")
Reported-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
When reading the /dev directory as part of the bus scan for DSA devices,
the directory handle from opendir was not freed on function return,
leading to a resource leak.
Coverity issue: 370588
Fixes: b7aaf417f936 ("raw/ioat: add bus driver for device scanning automatically")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
If no enable_drivers option is passed, the default is to build
the drivers list by calling list-dir-globs.py.
But if no Python interpreter is installed, no error is reported
and all drivers end up being disabled.
Example on a minimal FreeBSD VM:
dpdk@freebsd:~/dpdk $ meson setup build
...
drivers:
common/cpt: not in enabled drivers build config
common/dpaax: not in enabled drivers build config
common/iavf: not in enabled drivers build config
common/mvep: not in enabled drivers build config
common/octeontx: not in enabled drivers build config
common/octeontx2: not in enabled drivers build config
bus/dpaa: not in enabled drivers build config
bus/fslmc: not in enabled drivers build config
...
dpdk@freebsd:~/dpdk $ cd drivers/
dpdk@freebsd:~/dpdk/drivers $ ~/dpdk/buildtools/list-dir-globs.py */*
env: python3: No such file or directory
Rely on meson internal interpreter.
Check return code when calling this script.
Fixes: ab9407c3addd ("build: allow using wildcards to disable drivers")
Fixes: 2e33309ebe03 ("config: enable/disable drivers in Arm builds")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variable "dev" is not used in hns3_get_tx_prep_needed()
in the case of RTE_LIBRTE_ETHDEV_DEBUG:
drivers/net/hns3/hns3_rxtx.c:4213:45: error: unused parameter ‘dev’
Fixes: d7ec2c076579 ("net/hns3: select Tx prepare based on Tx offload")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Keep the list of SoCs in a single place and include it so that the
documentation won't get outdated.
Fixes: 8f5ea6a464ac ("config/arm: fix implementer and its SoCs")
Fixes: 1b4c86a721c9 ("config/arm: add Marvell CN10K")
Fixes: 7cf32a22b240 ("config/arm: add Hisilicon kunpeng")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Copy over the offset data required for auth in out-of-place op
when auth offset and cipher offset are not aligned.
Fixes: e847fc512817 ("test/crypto: add encrypted digest case for AES-CTR-CMAC")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
The init function was calling the dpseci_open
while dpseci_close was called by the open function.
This is a mismatch un-init shall clean the init configurations and
close shall clear the configure function settings.
This was causing issue with recent changes in test framework, where
the close was being called and causing DPAA2 SEC to fail in configure
Fixes: e5cbdfc53765 ("crypto/dpaa2_sec: add basic operations")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA requires the I/O shall be done in a HW portal context only.
The portal affinity is currently only being done in session create
and config APIs with the assumption that same thread will be used
for IO. This is causing issue.
This patch add support during I/O to check the HW portal affinity
and affine portal- if not affined already.
Fixes: 9a984458f755 ("crypto/dpaa_sec: rewrite Rx/Tx path")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
For out-of-place operations, comparing expected ciphertext with
the operation result should skip cipher_offset bytes, as those
will not be copied from source to the destination buffer, making
the tests fail.
Fixes: 02ed7b3871d6 ("test/crypto: add SNOW3G test cases for auth-cipher")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Recent patch to support UDP encapsulation introduced problem with
handling inbound IPv6 packets with header extensions.
This patch aims to fix the issue.
Bugzilla ID: 695
Fixes: 9a1cc8f1ed74 ("examples/ipsec-secgw: support UDP encapsulation")
Reported-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch enables the compression on QAT GEN3 (on hardware
versions that support it) and changes the error message shown
on older hardware versions that don't support the compression.
It also fixes the crash that happened on IM buffer allocation
failure (not enough memory) during the PMD cleaning phase.
Fixes: a124830a6f00 ("compress/qat: enable dynamic huffman encoding")
Fixes: 352332744c3a ("compress/qat: add dynamic SGL allocation")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch increases the intermediate buffer size used for the
compression on QAT GEN3 to accommodate new hardware versions.
Fixes: a124830a6f00 ("compress/qat: enable dynamic huffman encoding")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The logging should show context by printing the two variables which
compared to each other. 'nb_harq_inputs', not 'nb_hard_outputs';
'nb_harq_outputs', not 'nb_hard_outputs'.
This patch corrected misused variable.
Fixes: d819c08327f3 ("app/bbdev: update for 5GNR")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Return value of a function 'rte_malloc' is dereferenced without
checking, and may result in segmentation fault.
This patch fixed it.
Fixes: 31a7853d1ed9 ("baseband/turbo_sw: support large size code block")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
VM channel number should not be validated against the
host vm_power_manager coremask core indexes, as VM
cores need not to be same as host cores.
So remove this check, to allow all the vm channels
to be added successfully.
Fixes: b49c677a0d24 ("examples/vm_power: respect core mask")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
This patch adds checking for service core index validity when parsing
service corelist.
Fixes: 7dbd7a6413ef ("service: add -S corelist option")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds checking for mp reply result in handle_sync().
Fixes: 07dcbfe0101f ("malloc: support multiprocess memory hotplug")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch adds checking for rte_zmalloc() result when init Intel ntb
device, also fix the same bug when start ntb device.
Fixes: 034c328eb025 ("raw/ntb: support Intel NTB")
Fixes: c39d1e082a4b ("raw/ntb: setup queues")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch adds checking spad user index validity when set or get attr.
Fixes: 277310027965 ("raw/ntb: introduce NTB raw device driver")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Move pkg-config override to beginning in the Makefile to allow
use PKGCONF variable to detect the libdpdk availability.
Fixes: fda34680eb9a ("examples: remove legacy sections of makefiles")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variable inc_dir is not defined in this file.
Fixes: 4cd1c5fd9ed4 ("regex/octeontx2: introduce REE driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Guy Kaneti <guyk@marvell.com>
Most of the checks on developer_mode have been accidentally dropped.
Restore them.
Fixes: 7d611e35b077 ("lib: simplify main build file")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
After creating a connection tracking context, it can be used between
two ports. For each port, the flow for one direction traffic will
be created.
The context can only be shared between the owner port and the peer
port that was specified when being created. Only the owner port
could update the context or query it in current implementation.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The item of ASO connection tracking will be translated into the
register value when matching. The validation of this item has no
dependency on other layers, since the flow including this item
should be jumped from another group. All the layers checking was
already done in the previous groups. Only the state bits conflict
should be checked.
It is assumed that the flow with CT item will always work on the
TCP traffic.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
