Currently, users have to use external RCU mechanisms to free resources
when using lock free hash algorithm.
Integrate RCU QSBR process to make it easier for the applications to use
lock free algorithm.
Refer to RCU documentation to understand various aspects of
integrating RCU library into other libraries.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
The config options CONFIG_RTE_* are simple RTE_* defines with meson.
Now that make support is dropped, update the HPET config reference.
The comment about the AVX512 config option is not relevant anymore.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Added guide about building by using meson.
Also added the command to create virtual device.
Suggested-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
With 'make' being removed, the patch cheatsheet needs to be updated to
remove any references to 'make'. These references have been replaced with
meson alternatives in this patch.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
While make has been deprecated for DPDK, it's still applicable for
some example apps to be built standalone, this patch adjusts the
guides to take that into consideration.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
A lot of drivers export headers, reproduce the same facility than for
libraries.
Note: this change fixes an issue with the crypto scheduler headers which
were not installed properly. A separate backport will be sent to stable
branches.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 63b3907833 ("build: remove library name from version map file name")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Replace master/slave terms in this driver.
The memory interface drivers uses a client/server architecture
so change the variable names and device arguments to that.
The previous devargs are maintained for compatibility, but if
used cause a notice in the log.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Update the coding style document to include a policy against
introducing new master/slave usage. This is taken from the similar
place in the Linux kernel coding style.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The build-sdk-meson.rst file originates from the short plain-text meson
instructions added in 2018. Add SPDX tag and copyright notice based on the
original commit.
Fixes: 9c3adc289c ("doc: add instructions on build using meson")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path. These checks are added in the check alg helper functions.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds documentation on the usage of the max SIMD bitwidth EAL
setting to enable AVX-512 at runtime.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
This patch adds a max SIMD bitwidth EAL configuration. The API allows
for an app to set this value. It can also be set using EAL argument
--force-max-simd-bitwidth, which will lock the value and override any
modifications made by the app.
Each arch has a define for the default SIMD bitwidth value, this is used
on EAL init to set the config max SIMD bitwidth.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The API ``rte_security_session_create`` takes only single
mempool for session and session private data. So the
application need to create mempool for twice the number of
sessions needed and will also lead to wastage of memory as
session private data need more memory compared to session.
Hence the API is modified to take two mempool pointers
- one for session and one for private data.
This is very similar to crypto based session create APIs.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Replace '--scalar' command-line option with new one: --alg=<algname>
to allow user explicitly select desired classify method.
This is an optional parameter, if not specified default classify
algorithm will be used.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduces two changes into l3fwd-acl behaviour to make
it behave in the same way as l3fwd:
- Add a command-line parameter to allow the user to specify the
destination mac address for each ethernet port used.
- While forwarding the packet update source and destination mac
addresses.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Queue stats will be removed from basic stats to xstats.
It will be PMDs responsibility to fill queue stats based on number of
queues they have.
Until all PMDs implement the xstats, a temporary
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' device flag created. PMDs switched
to the xstats should clear this flag to bypass the ethdev layer autofill
for queue stats.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Change rte_eth_dev_stop() return value from void to int
and return negative errno values in case of error conditions.
Also update the usage of the function in ethdev according to
the new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The API function rte_eth_dev_close() was returning void.
The return type is changed to int for notifying of errors.
If an error happens during a close operation,
the status of the port is undefined,
a maximum of resources having been freed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add command line parameter:
--rxoffs=X[,Y]
Sets the offsets of packet segments from the beginning of the
receiving buffer if split feature is engaged. Affects only the
queues configured with split offloads (currently BUFFER_SPLIT
is supported only).
Add interactive mode command, providing the same:
testpmd> set rxoffs (x[,y]*)
Where x[,y]* represents a CSV list of values, without white space.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add command line parameter:
--rxpkts=X[,Y]
Sets the length of segments to scatter packets on receiving if split
feature is engaged. Affects only the queues configured with split
offloads (currently BUFFER_SPLIT is supported only).
Add interactive mode command:
testpmd> set rxpkts (x[,y]*)
Where x[,y]* represents a CSV list of values, without white space.
Sets the length of segments to scatter packets on receiving if split
feature is engaged. Affects only the queues configured with split
offloads (currently BUFFER_SPLIT is supported only). Optionally the
multiple memory pools can be specified with --mbuf-size command line
parameter and the mbufs to receive will be allocated sequentially
from these extra memory pools.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The command line parameter --mbuf-size is updated, it can handle
the multiple values like the following:
--mbuf-size=2176,512,768,4096
specifying the creation the extra memory pools with the requested
mbuf data buffer sizes. If some buffer split feature is engaged
the extra memory pools can be used to configure the Rx queues
with rte_the_dev_rx_queue_setup_ex().
The extra pools are created with requested sizes, and pool names
are assigned with appended index: mbuf_pool_socket_%socket_%index.
Index zero is used to specify the first mandatory pool to maintain
compatibility with existing code.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The DPDK datapath in the transmit direction is very flexible.
An application can build the multi-segment packet and manages
almost all data aspects - the memory pools where segments
are allocated from, the segment lengths, the memory attributes
like external buffers, registered for DMA, etc.
In the receiving direction, the datapath is much less flexible,
an application can only specify the memory pool to configure the
receiving queue and nothing more. In order to extend receiving
datapath capabilities it is proposed to add the way to provide
extended information how to split the packets being received.
The new offload flag RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT in device
capabilities is introduced to present the way for PMD to report to
application about supporting Rx packet split to configurable
segments. Prior invoking the rte_eth_rx_queue_setup() routine
application should check RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT flag.
The following structure is introduced to specify the Rx packet
segment for RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT offload:
struct rte_eth_rxseg_split {
struct rte_mempool *mp; /* memory pools to allocate segment from */
uint16_t length; /* segment maximal data length,
configures "split point" */
uint16_t offset; /* data offset from beginning
of mbuf data buffer */
uint32_t reserved; /* reserved field */
};
The segment descriptions are added to the rte_eth_rxconf structure:
rx_seg - pointer the array of segment descriptions, each element
describes the memory pool, maximal data length, initial
data offset from the beginning of data buffer in mbuf.
This array allows to specify the different settings for
each segment in individual fashion.
rx_nseg - number of elements in the array
If the extended segment descriptions is provided with these new
fields the mp parameter of the rte_eth_rx_queue_setup must be
specified as NULL to avoid ambiguity.
There are two options to specify Rx buffer configuration:
- mp is not NULL, rrx_conf.rx_nseg is zero, it is compatible
configuration, follows existing implementation, provides
the single pool and no description for segment sizes
and offsets.
- mp is NULL, rx_conf.rx_seg is not NULL, rx_conf.rx_nseg is not
zero, it provides the extended configuration, individually for
each segment.
f the Rx queue is configured with new settings the packets being
received will be split into multiple segments pushed to the mbufs
with specified attributes. The PMD will split the received packets
into multiple segments according to the specification in the
description array.
For example, let's suppose we configured the Rx queue with the
following segments:
seg0 - pool0, len0=14B, off0=2
seg1 - pool1, len1=20B, off1=128B
seg2 - pool2, len2=20B, off2=0B
seg3 - pool3, len3=512B, off3=0B
The packet 46 bytes long will look like the following:
seg0 - 14B long @ RTE_PKTMBUF_HEADROOM + 2 in mbuf from pool0
seg1 - 20B long @ 128 in mbuf from pool1
seg2 - 12B long @ 0 in mbuf from pool2
The packet 1500 bytes long will look like the following:
seg0 - 14B @ RTE_PKTMBUF_HEADROOM + 2 in mbuf from pool0
seg1 - 20B @ 128 in mbuf from pool1
seg2 - 20B @ 0 in mbuf from pool2
seg3 - 512B @ 0 in mbuf from pool3
seg4 - 512B @ 0 in mbuf from pool3
seg5 - 422B @ 0 in mbuf from pool3
The offload RTE_ETH_RX_OFFLOAD_SCATTER must be present and
configured to support new buffer split feature (if rx_nseg
is greater than one).
The split limitations imposed by underlying PMD is reported
in the new introduced rte_eth_dev_info->rx_seg_capa field.
The new approach would allow splitting the ingress packets into
multiple parts pushed to the memory with different attributes.
For example, the packet headers can be pushed to the embedded
data buffers within mbufs and the application data into
the external buffers attached to mbufs allocated from the
different memory pools. The memory attributes for the split
parts may differ either - for example the application data
may be pushed into the external memory located on the dedicated
physical device, say GPU or NVMe. This would improve the DPDK
receiving datapath flexibility with preserving compatibility
with existing API.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
rte_flow API provides the building blocks for vendor-agnostic flow
classification offloads. The rte_flow "patterns" and "actions"
primitives are fine-grained, thus enabling DPDK applications the
flexibility to offload network stacks and complex pipelines.
Applications wishing to offload tunneled traffic are required to use
the rte_flow primitives, such as group, meta, mark, tag, and others to
model their high-level objects. The hardware model design for
high-level software objects is not trivial. Furthermore, an optimal
design is often vendor-specific.
When hardware offloads tunneled traffic in multi-group logic,
partially offloaded packets may arrive to the application after they
were modified in hardware. In this case, the application may need to
restore the original packet headers. Consider the following sequence:
The application decaps a packet in one group and jumps to a second
group where it tries to match on a 5-tuple, that will miss and send
the packet to the application. In this case, the application does not
receive the original packet but a modified one. Also, in this case,
the application cannot match on the outer header fields, such as VXLAN
vni and 5-tuple.
There are several possible ways to use rte_flow "patterns" and
"actions" to resolve the issues above. For example:
1 Mapping headers to a hardware registers using the
rte_flow_action_mark/rte_flow_action_tag/rte_flow_set_meta objects.
2 Apply the decap only at the last offload stage after all the
"patterns" were matched and the packet will be fully offloaded.
Every approach has its pros and cons and is highly dependent on the
hardware vendor. For example, some hardware may have a limited number
of registers while other hardware could not support inner actions and
must decap before accessing inner headers.
The tunnel offload model resolves these issues. The model goals are:
1 Provide a unified application API to offload tunneled traffic that
is capable to match on outer headers after decap.
2 Allow the application to restore the outer header of partially
offloaded packets.
The tunnel offload model does not introduce new elements to the
existing RTE flow model and is implemented as a set of helper
functions.
For the application to work with the tunnel offload API it
has to adjust flow rules in multi-table tunnel offload in the
following way:
1 Remove explicit call to decap action and replace it with PMD actions
obtained from rte_flow_tunnel_decap_and_set() helper.
2 Add PMD items obtained from rte_flow_tunnel_match() helper to all
other rules in the tunnel offload sequence.
VXLAN Code example:
Assume application needs to do inner NAT on the VXLAN packet.
The first rule in group 0:
flow create <port id> ingress group 0
pattern eth / ipv4 / udp dst is 4789 / vxlan / end
actions {pmd actions} / jump group 3 / end
The first VXLAN packet that arrives matches the rule in group 0 and
jumps to group 3. In group 3 the packet will miss since there is no
flow to match and will be sent to the application. Application will
call rte_flow_get_restore_info() to get the packet outer header.
Application will insert a new rule in group 3 to match outer and inner
headers:
flow create <port id> ingress group 3
pattern {pmd items} / eth / ipv4 dst is 172.10.10.1 /
udp dst 4789 / vxlan vni is 10 /
ipv4 dst is 184.1.2.3 / end
actions set_ipv4_dst 186.1.1.1 / queue index 3 / end
Resulting of the rules will be that VXLAN packet with vni=10, outer
IPv4 dst=172.10.10.1 and inner IPv4 dst=184.1.2.3 will be received
decapped on queue 3 with IPv4 dst=186.1.1.1
Note: The packet in group 3 is considered decapped. All actions in
that group will be done on the header that was inner before decap. The
application may specify an outer header to be matched on. It's PMD
responsibility to translate these items to outer metadata.
API usage:
/**
* 1. Initiate RTE flow tunnel object
*/
const struct rte_flow_tunnel tunnel = {
.type = RTE_FLOW_ITEM_TYPE_VXLAN,
.tun_id = 10,
}
/**
* 2. Obtain PMD tunnel actions
*
* pmd_actions is an intermediate variable application uses to
* compile actions array
*/
struct rte_flow_action **pmd_actions;
rte_flow_tunnel_decap_and_set(&tunnel, &pmd_actions,
&num_pmd_actions, &error);
/**
* 3. offload the first rule
* matching on VXLAN traffic and jumps to group 3
* (implicitly decaps packet)
*/
app_actions = jump group 3
rule_items = app_items; /** eth / ipv4 / udp / vxlan */
rule_actions = { pmd_actions, app_actions };
attr.group = 0;
flow_1 = rte_flow_create(port_id, &attr,
rule_items, rule_actions, &error);
/**
* 4. after flow creation application does not need to keep the
* tunnel action resources.
*/
rte_flow_tunnel_action_release(port_id, pmd_actions,
num_pmd_actions);
/**
* 5. After partially offloaded packet miss because there was no
* matching rule handle miss on group 3
*/
struct rte_flow_restore_info info;
rte_flow_get_restore_info(port_id, mbuf, &info, &error);
/**
* 6. Offload NAT rule:
*/
app_items = { eth / ipv4 dst is 172.10.10.1 / udp dst 4789 /
vxlan vni is 10 / ipv4 dst is 184.1.2.3 }
app_actions = { set_ipv4_dst 186.1.1.1 / queue index 3 }
rte_flow_tunnel_match(&info.tunnel, &pmd_items,
&num_pmd_items, &error);
rule_items = {pmd_items, app_items};
rule_actions = app_actions;
attr.group = info.group_id;
flow_2 = rte_flow_create(port_id, &attr,
rule_items, rule_actions, &error);
/**
* 7. Release PMD items after rule creation
*/
rte_flow_tunnel_item_release(port_id,
pmd_items, num_pmd_items);
References
1. https://mails.dpdk.org/archives/dev/2020-June/index.html
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
RTE flow items & actions use positive values in item & action type.
Negative values are reserved for PMD private types. PMD
items & actions usually are not exposed to application and are not
used to create RTE flows.
The patch allows applications with access to PMD flow
items & actions ability to integrate RTE and PMD items & actions
and use them to create flow rule.
RTE flow item or action conversion library accepts positive known
element types with predefined sizes only. Private PMD items and
actions do not fit into this scheme because PMD type values are
negative, each PMD has it's own types numeration and element types and
their sizes are not visible at RTE level. To resolve these
limitations the patch proposes this solution:
1. PMD can expose elements of pointer size only. RTE flow
conversion functions will use pointer size for each configuration
object in private PMD element it processes;
2. RTE flow verification will not reject elements with negative type.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch implements the change proposes in RFC [1], adding dedicated
fields to ETH and VLAN items structs, to clearly define the required
characteristic of a packet, and enable precise match criteria.
Documentation is updated accordingly.
[1] https://mails.dpdk.org/archives/dev/2020-August/177536.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
A new parameter `hairpin-mode` is introduced to the testpmd command
line. Bitmask value is used to provide a more flexible configuration.
This parameter should be used when `hairpinq` is specified in the
command line.
Bit 0 in the LSB indicates the hairpin will use the loop mode. The
previous port Rx queue will be connected to the current port Tx
queue.
Bit 1 in the LSB indicates the hairpin will use pair port mode. The
even index port will be paired with the next odd index port. If the
total number of the probed ports is odd, then the last one will be
paired to itself.
If this byte is zero, then each port will be paired to itself.
Bit 0 takes a higher priority in the checking.
Bit 4 in the second bytes indicate if the hairpin will use explicit
Tx flow mode.
e.g. in the command line, "--hairpinq=2 --hairpin-mode=0x11"
If not set, default value zero will be used and the behavior will
try to get aligned with the previous single port mode. If the ports
belong to different vendors' NICs, it is suggested to use the `self`
hairpin mode only.
Since hairpin configures the hardware resources, the port mask of
packets forwarding engine will not be used here.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
After hairpin queues are configured, in general, the application will
maintain the ports topology and even the queues configuration for
the hairpin. But sometimes it will not.
If there is no hot-plug, it is easy to bind and unbind hairpin among
all the ports. The application can just connect or disconnect the
hairpin egress ports to/from all the probed ingress ports. Then all
the connections could be handled properly.
But with hot-plug / hot-unplug, one port could be probed and removed
dynamically. With two ports hairpin, all the connections from and to
this port should be handled after start(bind) or before stop(unbind).
It is necessary to know the hairpin topology with this port.
This function will return the ports list with the actual peer ports
number after configuration. Either peer Rx or Tx ports will be
gotten with this function call.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
To support two ports hairpin mode and keep the backward compatibility
for the application, two new attribute members of the hairpin queue
configuration structure will be added.
`tx_explicit` means if the application itself will insert the Tx part
flow rules. If not set, PMD will insert the rules implicitly.
`manual_bind` means if the hairpin Tx queue and peer Rx queue will be
bound automatically during the device start stage.
Different Tx and Rx queue pairs could have different values, but it
is highly recommended that all paired queues between one egress and
its peer ingress ports have the same values, in order not to bring
any chaos to the system. The actual support of these attribute
parameters will be checked and decided by the PMD drivers.
In the single port hairpin, if both are zero without any setting, the
behavior will remain the same as before. It means that no bind API
needs to be called and no Tx flow rules need to be inserted manually
by the application.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In single port hairpin mode, all the hairpin Tx and Rx queues belong
to the same device. After the queues are set up properly, there is
no other dependency between the Tx queue and its Rx peer queue. The
binding process that connected the Tx and Rx queues together from
hardware level will be done automatically during the device start
procedure. Everything required is configured and initialized already
for the binding process.
But in two ports hairpin mode, there will be some cross-dependences
between two different ports. Usually, the ports will be initialized
serially by the main thread but not in parallel. The earlier port
will not be able to enable the bind if the following peer port is
not yet configured with HW resources. What's more, if one port is
detached / attached dynamically, it would introduce more trouble
for the hairpin binding.
To overcome these, new APIs for binding and unbinding are added.
During startup, only the hairpin Tx and Rx peer queues will be set
up. Nothing will be done when starting the device if the queues are
without auto-bind attribute. Only after the required ports pair
started, the `rte_eth_hairpin_bind()` API can be called to bind the
all Tx queues of the egress port to the Rx queues of the peer port.
Then the connection between the egress and ingress ports pair will
be established.
The `rte_eth_hairpin_unbind()` API could be used to disconnect the
egress and the peer ingress ports. This should only be called before
the device is closed if needed. When doing the clean up, all the
egress and ingress pairs related to a single port should be taken
into consideration, especially in the hot unplug case.
mode is described.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Applications handling fragmented IPv6 packets need to match on IPv6
fragment extension header, in order to identify the fragments order
and location in the packet.
This patch introduces the IPv6 fragment extension header item,
proposed in [1].
Relevant definitions are moved from lib/librte_ip_frag/rte_ip_frag.h
to lib/librte_net/rte_ip.h, as they are needed for IPv6 header handling.
struct ipv6_extension_fragment renamed to rte_ipv6_fragment_ext to
adapt it to the common naming convention.
Default mask is not defined, since all fields are optional.
[1] http://mails.dpdk.org/archives/dev/2020-March/160255.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Using the current implementation of DPDK, an application cannot match on
IPv6 packets, based on the existing extension headers, in a simple way.
Field 'Next Header' in IPv6 header indicates type of the first extension
header only. Following extension headers can't be identified by
inspecting the IPv6 header.
As a result, the existence or absence of specific extension headers
can't be used for packet matching.
For example, fragmented IPv6 packets contain a dedicated extension header
(which is implemented in a later patch of this series).
Non-fragmented packets don't contain the fragment extension header.
For an application to match on non-fragmented IPv6 packets, the current
implementation doesn't provide a suitable solution.
Matching on the Next Header field is not sufficient, since additional
extension headers might be present in the same packet.
To match on fragmented IPv6 packets, the same difficulty exists.
This patch implements the update as detailed in RFC [1].
A set of additional values will be added to IPv6 header struct.
These values will indicate the existence of every defined extension
header type, providing simple means for identification of existing
extensions in the packet header.
Continuing the above example, fragmented packets can be identified using
the specific value indicating existence of fragment extension header.
To match on non-fragmented IPv6 packets, need to use has_frag_ext 0.
To match on fragmented IPv6 packets, need to use has_frag_ext 1.
To match on any IPv6 packets, the has_frag_ext field should
not be specified for match.
[1] https://mails.dpdk.org/archives/dev/2020-August/177257.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds shared action support to testpmd CLI.
All shared actions created via testpmd CLI assigned ID for further
reference in other CLI commands. Shared action ID supplied as CLI
argument or assigned by testpmd is similar to flow ID & limited to
scope of testpdm CLI.
Create shared action syntax:
flow shared_action {port_id} create [action_id {shared_action_id}]
[ingress] [egress] action {action} / end
Create shared action examples:
flow shared_action 0 create action_id 100 \
ingress action rss queues 1 2 end / end
This creates shared rss action with id 100 on port 0.
flow shared_action 0 create action_id \
ingress action rss queues 0 1 end / end
This creates shared rss action with id assigned by testpmd
on port 0.
Update shared action syntax:
flow shared_action {port_id} update {shared_action_id}
action {action} / end
Update shared action example:
flow shared_action 0 update 100 \
action rss queues 0 3 end / end
This updates shared rss action having id 100 on port 0
with rss to queues 0 3 (in create example rss queues were
1 & 2).
Destroy shared action syntax:
flow shared_action {port_id} destroy action_id {shared_action_id} [...]
Destroy shared action example:
flow shared_action 0 destroy action_id 100 action_id 101
This destroys shared actions having id 100 & 101
Query shared action syntax:
flow shared_action {port} query {shared_action_id}
Query shared action example:
flow shared_action 0 query 100
This queries shared actions having id 100
Use shared action as flow action syntax:
flow create {port_id} ... / end actions [action / [...]]
shared {action_id} / [action / [...]] end
Use shared action as flow action example:
flow create 0 ingress pattern ... / end \
actions shared 100 / end
This creates flow rule where rss action is shared rss action
having id 100.
All shared action CLIs report status of the command.
Shared action query CLI output depends on action type.
Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Introduce extension of flow action API enabling sharing of single
rte_flow_action in multiple flows. The API intended for PMDs, where
multiple HW offloaded flows can reuse the same HW essence/object
representing flow action and modification of such an essence/object
affects all the rules using it.
Motivation and example
===
Adding or removing one or more queues to RSS used by multiple flow rules
imposes per rule toll for current DPDK flow API; the scenario requires
for each flow sharing cloned RSS action:
- call `rte_flow_destroy()`
- call `rte_flow_create()` with modified RSS action
API for sharing action and its in-place update benefits:
- reduce the overhead of multiple RSS flow rules reconfiguration
- optimize resource utilization by sharing action across multiple
flows
Change description
===
Shared action
===
In order to represent flow action shared by multiple flows new action
type RTE_FLOW_ACTION_TYPE_SHARED is introduced (see `enum
rte_flow_action_type`).
Actually the introduced API decouples action from any specific flow and
enables sharing of single action by its handle across multiple flows.
Shared action create/use/destroy
===
Shared action may be reused by some or none flow rules at any given
moment, i.e. shared action resides outside of the context of any flow.
Shared action represent HW resources/objects used for action offloading
implementation.
API for shared action create (see `rte_flow_shared_action_create()`):
- should allocate HW resources and make related initializations required
for shared action implementation.
- make necessary preparations to maintain shared access to
the action resources, configuration and state.
API for shared action destroy (see `rte_flow_shared_action_destroy()`)
should release HW resources and make related cleanups required for shared
action implementation.
In order to share some flow action reuse the handle of type
`struct rte_flow_shared_action` returned by
rte_flow_shared_action_create() as a `conf` field of
`struct rte_flow_action` (see "example" section).
If some shared action not used by any flow rule all resources allocated
by the shared action can be released by rte_flow_shared_action_destroy()
(see "example" section). The shared action handle passed as argument to
destroy API should not be used any further i.e. result of the usage is
undefined.
Shared action re-configuration
===
Shared action behavior defined by its configuration can be updated via
rte_flow_shared_action_update() (see "example" section). The shared
action update operation modifies HW related resources/objects allocated
on the action creation. The number of operations performed by the update
operation should not depend on the number of flows sharing the related
action. On return of shared action update API action behavior should be
according to updated configuration for all flows sharing the action.
Shared action query
===
Provide separate API to query shared action state (see
rte_flow_shared_action_update()). Taking a counter as an example: query
returns value aggregating all counter increments across all flow rules
sharing the counter. This API doesn't query shared action configuration
since it is controlled by rte_flow_shared_action_create() and
rte_flow_shared_action_update() APIs and no supposed to change by other
means.
example
===
struct rte_flow_action actions[2];
struct rte_flow_shared_action_conf conf;
struct rte_flow_action action;
/* skipped: initialize conf and action */
struct rte_flow_shared_action *handle =
rte_flow_shared_action_create(port_id, &conf, &action, &error);
actions[0].type = RTE_FLOW_ACTION_TYPE_SHARED;
actions[0].conf = handle;
actions[1].type = RTE_FLOW_ACTION_TYPE_END;
/* skipped: init attr0 & pattern0 args */
struct rte_flow *flow0 = rte_flow_create(port_id, &attr0, pattern0,
actions, error);
/* create more rules reusing shared action */
struct rte_flow *flow1 = rte_flow_create(port_id, &attr1, pattern1,
actions, error);
/* skipped: for flows 2 till N */
struct rte_flow *flowN = rte_flow_create(port_id, &attrN, patternN,
actions, error);
/* update shared action */
struct rte_flow_action updated_action;
/*
* skipped: initialize updated_action according to desired action
* configuration change
*/
rte_flow_shared_action_update(port_id, handle, &updated_action, error);
/*
* from now on all flows 1 till N will act according to configuration of
* updated_action
*/
/* skipped: destroy all flows 1 till N */
rte_flow_shared_action_destroy(port_id, handle, error);
Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add description about the sample flow limitation.
Sample Flow supports in NIC-Rx and E-Switch domains.
Due to Metadata register c0 is deleted while doing the loopback,
so that only support forward the sampling packet into
E-Switch manager port, no additional action support in sample flow.
Add the offloads minimum versions for new sampling feature.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
