This is a rather simple handler that prints a message with the name of
the current event. It can be used to check PMD callback registration and
triggers.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Extended xstats API in ethdev library to allow grouping of stats
logically so they can be retrieved per logical grouping managed
by the application.
Changed existing functions rte_eth_xstats_get_names and
rte_eth_xstats_get to use a new list of arguments: array of ids
and array of values. ABI versioning mechanism was used to
support backward compatibility.
Introduced two new functions rte_eth_xstats_get_all and
rte_eth_xstats_get_names_all which keeps functionality of the
previous ones (respectively rte_eth_xstats_get and
rte_eth_xstats_get_names) but use new API inside.
test-pmd: add support for new xstats API retrieving by id in
testpmd application: xstats_get() and
xstats_get_names() call with modified parameters.
doc: add description for modified xstats API
Documentation change for modified extended statistics API functions.
The old API only allows retrieval of *all* of the NIC statistics
at once. Given this requires a MMIO read PCI transaction per statistic
it is an inefficient way of retrieving just a few key statistics.
Often a monitoring agent only has an interest in a few key statistics,
and the old API forces wasting CPU time and PCIe bandwidth in retrieving
*all* statistics; even those that the application didn't explicitly
show an interest in.
The new, more flexible API allow retrieval of statistics per ID.
If a PMD wishes, it can be implemented to read just the required
NIC registers. As a result, the monitoring application no longer wastes
PCIe bandwidth and CPU time.
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
When ipv6 packet is tunnel packet, "PKT_TX_OUTER_IPV6" flag must
be set, to let prepare the correct mbuf meta data for tx forward.
Fixes: 2b76648872 ("net/e1000: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds latency stats commandline argument to testpmd,
allowing to specify the lcore to use for latencystats updates.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Calculate bitrate statistics using the bitrate stats library. The
resulting statistics can be viewed via proc_info.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Change the size of m->port and m->nb_segs to 16 bits. It is now possible
to reference a port identifier larger than 256 and have a mbuf chain
larger than 256 segments.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds MTU display to "show port info" command.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a CLI in testpmd to test the TC min bandwidth
setting.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In rte_eth_check_reta_mask(), it is required to align the size of the RETA
table to RTE_RETA_GROUP_SIZE but as the size can be less than the limit,
this should be removed. The change is also applied to a command of testpmd.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch is to add testpmd CLI for getting all loaded DDP profiles.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add a CLI to set some TCs' strict link priority mode
on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific TC's max bandwidth
on a specific VF from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Fix the UP and TC mapping to divide multiple UPs to TCs instead of mapping
the UPs who are lager than num_tcs to TC0.
Fixes: 1a572499be ("app/testpmd: setup DCB forwarding based on traffic class")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
In SRIOV mode, the mq_mode of rte_eth_rxmode should not carry VMDQ info
without rx_adv_conf setting.
Fixes: a30979f6ad ("app/testpmd: set Rx VMDq RSS mode")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Some PMDs provide device specific APIs. Bond and xenvirt are existing
samples for this.
And since these are PMD libraries, there are two options on how to link
them for shared library build:
1- They can be linked to all applications by default, using common
rte.app.mk file.
2- They can be explicitly linked to applications that use device
specific API.
Currently option one is in use, this patch switches to the option two.
Moves library linking to the Makefile of application Makefile that uses
device specific API.
This prevent these PMD libraries to be a dependency to applications
that don't use these device specific APIs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add two new commands "show port cap <port>" and "show
port cap all" to display what offload capabilities supported
in ports. It will not only display all the capabilities of
the port, but also the enabling condition for each capability
in the running time.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
modify set_vf_rx_vlan function to handle the i40e PMD.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
command is: set vf vlan tag port_id vf_id on|off
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add command to call rte_pmd_i40e_set_vf_broadcast.
Add set vf broadcast in testpmd_funcs.rst file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF multicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF unicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The new VF Daemon (VFD) APIs is implemented on i40e. Change
testpmd code to use them, including VF MAC anti-spoofing,
VF VLAN anti-spoofing, TX loopback, VF VLAN strip, VF VLAN
insert.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Parameter checking is done in the rte_pmd_ixgbe_* functions.
Remove parameter checking from before calls to the rte_pmd_ixgbe_*
functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Use the the following ixgbe public functions:
rte_pmd_ixgbe_set_vf_rate_limit
rte_pmd_ixgbe_set_vf_rx
rte_pmd_ixgbe_set_vf_rxmode
rte_pmd_ixgbe_set_vf_tx
rte_pmd_ixgbe_set_vf_vlan_filter
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Some CLIs don't check the input port ID, it
may cause segmentation fault (core dumped).
Fixes: 425781ff5a ("app/testpmd: add ixgbe VF management")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Below MACsec offload commands are added:
- set macsec offload <port_id> on encrypt on|off replay-protect on|off
- set macsec offload <port_id> off
- set macsec sc tx|rx <port_id> <mac> <pi>
- set macsec sa tx|rx <port_id> <idx> <an> <pn> <key>
Also update the testpmd user guide.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
By introducing explicit -lrte_pmd_ixgbe link request in
testpmd Makefile,"-Wl,-lrte_pmd_ixgbe" provided twice, and linker
removes the duplication by keeping only first occurrence.
This moves "-Wl,-lrte_pmd_ixgbe" out of "-Wl,--whole-archive" flag
and makes symbol generation totally different than previous version
in case of static build.
This patch fixes the static build linking order by introducing
-lrte_pmd_ixgbe under the shared library config
(CONFIG_RTE_BUILD_SHARED_LIB).
Fixes: 425781ff5a ("app/testpmd: add ixgbe VF management")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses several obvious issues reported by Coverity
with array bounds checks in functions related to the flow API.
Coverity issue: 139596, 139597, 139598, 139599
Fixes: 938a184a18 ("app/testpmd: implement basic support for flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since all current drivers supports Tx preparation API, it is used
in csum forwarding engine by default for all drivers.
Adding additional step to the csum engine costs about 3-4% of performance
drop, on my setup with ixgbe driver. It's caused mostly by the need
of reaccessing and modification of packet data.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A missing include causes the following compilation errors:
error: use of undeclared identifier 'AF_INET'
error: use of undeclared identifier 'AF_INET6'
Fixes: ef6e38550f ("app/testpmd: add items ipv4/ipv6 to flow command")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit exposes the following item fields through the flow command:
- VLAN priority code point, drop eligible indicator and VLAN identifier
(all part of TCI).
- IPv4 type of service, time to live and protocol.
- IPv6 traffic class, flow label, next header and hop limit.
- SCTP tag and checksum.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
- QUEUE: assign packets to a given queue index.
- DUP: duplicate packets to a given queue index.
- RSS: spread packets among several queues.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- MARK: attach 32 bit value to packets.
- FLAG: flag packets.
- DROP: drop packets.
- COUNT: enable counters for a rule.
- PF: redirect packets to physical device function.
- VF: redirect packets to virtual device function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match a few properties of common L4[.5] protocol
headers:
- ICMP: type and code.
- UDP: source and destination ports.
- TCP: source and destination ports.
- SCTP: source and destination ports.
- VXLAN: network identifier.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match basic fields from IPv4 and IPv6 headers (source
and destination addresses only).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
These pattern items match basic Ethernet headers (source, destination and
type) and related 802.1Q/ad VLAN headers.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
