Add timeout as new argument in host interface command.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add new function ixgbe_get_hi_status to get host interface command status.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Request and response command have different struct.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
The old device id: IXGBE_DEV_ID_X550EM_X is split into 2 new device id:
IXGBE_DEV_ID_X550EM_X_10G_T and IXGBE_DEV_ID_X550EM_X_1G_T
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add function to calculate checksum for X550; and add buffer into argument list
to hold the eeprom image.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add new phy ID: X557_PHY_ID, and implement its internal setup function and external init function.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Define the function of setting phy power;
Set copper phy power for x540.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Define function ixgbe_mng_present to check if management capability is present or not.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
New function to get bus information for x550em;
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
It could early return according to read status.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Use switch-case statement to replace if-else statement.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Wait for a last completion before clearing buffers,
and before proceeding, it needs make sure that the PCIe block does not have
transactions pending.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
It needs check if the bus type is the unknown type or not.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
LAN ID is needed for i2c access, so move it before reading I2C eeprom.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Support the bit-bang mode on X550;
And negate I2C output enable;
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
New API to perform I2C read combined operation.
New API to perform I2C write combined operation.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Remove '&' before function name;
Adjust the spaces etc.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
There are no memcpy functions in rte_ip.h so there is no need to include
rte_memcpy.h in that file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
probe and close both don't modify the rte_pci_addr structure
that is passed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The PCI device id table is immutable and should be made const
in all drivers. The pseudo drivers can initialize their local
copy as necessary.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Linux style is not to put extra useless paren's around
the expression passed to return statement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The statistics tables and null mac address should be immutable.
Fix up get_addr routines to accept const args.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is no reason to inline functions that are not in the critical
path.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch helps enic migrate to the new flow-director API.
It takes care of the following.
1. The change in fdir_filter structure and stats structure
2. DPDK interface functions in enic_ethdev.c
3. ENIC driver functions that deal with the VIC adapter
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
This field is not supposed to contain the RX queue index. Applications can
rely on it to determine the port a given mbuf comes from.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Sujith Sankar <ssujith@cisco.com>
To initialize a structure with zeros, one field was explicitly set
to avoid "missing initializer" bug with old GCC (e.g. 4.4).
This warning is now disabled (commit <insertlater>) for old versions of GCC,
so the workarounds may be removed.
These initializers should not be needed for static variables but they
are still used to workaround an ICC bug (see commit b2595c4aa9).
There is one remaining exception where {0} initializer doesn't work cleanly,
even with recent GCC:
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:735:9:
error: missing braces around initializer [-Werror=missing-braces]
struct rte_mbuf mb_def = {0}; /* zeroed mbuf */
Tested with gcc-4.4.7 (CentOS), gcc-4.7.2 (Debian), gcc-4.9.2 (Arch),
clang-3.6.0 and icc-13.1.1.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: John McNamara <john.mcnamara@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
With GCC 4.4.7 from CentOS 6.5, the following errors arise:
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_dev_rx_queue_setup':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_set_rsc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_recv_pkts_lro_single_alloc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1479: error: 'next_rsc_entry' may be used uninitialized in this function
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1480: error: 'next_rxe' may be used uninitialized in this function
The "missing initializer" warning is a GCC bug which seems fixed in 4.7.
The same warning is thrown by clang.
The "may be used uninitialized" warning is another GCC bug which seems fixed in 4.7.
Fixes: 8eecb3295a ("ixgbe: add LRO support")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
- Only x540 and 82599 devices support LRO.
- Add the appropriate HW configuration.
- Add RSC aware rx_pkt_burst() handlers:
- Implemented bulk allocation and non-bulk allocation versions.
- Add LRO-specific fields to rte_eth_rxmode, to rte_eth_dev_data
and to ixgbe_rx_queue.
- Use the appropriate handler when LRO is requested.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- ixgbe_rx_alloc_bufs():
- Reset the rte_mbuf fields only when requested.
- Take the RDT update out of the function.
- Add the stub when RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC is not defined.
- ixgbe_recv_scattered_pkts():
- Take the code that updates the fields of the cluster's HEAD buffer into
the inline function.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- Removed the not needed casting.
- ixgbe_dev_rx_init(): shorten the lines by defining a local alias variable to access
&dev->data->dev_conf.rxmode.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ethernet device ops function table should be made const for
safety and security.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Since rte_free accept NULL and does nothing, better to save
space and remove these useless checks.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The virtio pmd is not restricted to uio anymore.
Fixes: da978dfdc4 ("virtio: use port IO to get PCI resource")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
The function name is printed in each enic_ethdev function.
Disable it by default with a new build option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Sujith Sankar <ssujith@cisco.com>
Reviewed-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
CONFIG_RTE_MBUF_SCATTER_GATHER was renamed into CONFIG_RTE_MBUF_REFCNT
by commit 62814bc2e9 and removed by commit 4769bc5a27.
Some traces remain because of delayed patches.
It can also be removed from doxygen config.
It is now poisoned in rte_mbuf.h to warn any misuse.
Fixes: d0dff9ba44 ("doc: sample application user guide")
Fixes: fc1f2750a3 ("doc: programmers guide")
Fixes: 4769bc5a27 ("mbuf: remove build option to disable refcnt")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
API *rte_eth_link_get* expect to call a wait to complete link_update.
That's the difference between *rte_eth_link_get_nowait*.
The patch fixes the issue that i40e link_update ignores the wait_to_complete flag.
The issue impacts those applications calling rte_eth_link_get to get wrong intermediate link status.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Klocwork reports array 'src_offset' may use index 16.
In function i40e_srcoff_to_flx_pit, index j + 1 can reach I40E_FDIR_MAX_FLEX_LEN.
This patch fixes this issue to avoid array bound.
Test report: http://www.dpdk.org/ml/archives/dev/2015-March/016030.html
Fixes: d8b90c4eab ("i40e: take flow director flexible payload configuration")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Kernel driver (kdrv) seems easier to understand than
passthrough driver (pt_driver). It's also more generic
as a PMD could run on top of any PCI kernel driver if
it would offer such support.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
