Add a new priv_size field in mbuf structure that should
be initialized at mbuf pool creation. This field contains the
size of the application private data in mbufs.
Introduce new static inline functions rte_mbuf_from_indirect()
and rte_mbuf_to_baddr() to replace the existing macros, which
take the private size in account when attaching and detaching
mbufs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new wrapper to rte_mempool_create() to simplify the creation
of a packet mbuf pool.
This wrapper can be used if there is no specific mempool flags, and
no specific mbuf or pool constructor function, which is most of the
use cases.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Allow the user to use the default rte_pktmbuf_init() function even
if the mbuf private size is not 0.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since previous commit, the flag PKT_TX_UDP_TUNNEL_PKT is not used by any PMD,
remove it from mbuf API and from csumonly (testpmd). In csumonly, the
PKT_TX_OUTER_IP_CKSUM flag is already set for vxlan checksum, providing
enough information to the underlying driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Replace PKT_TX_VXLAN_CKSUM with PKT_TX_UDP_TUNNEL_PKT in order to indicate
a packet is an UDP tunneling packet, and introduce 3 TX offload flags for
outer IP TX checksum, which are PKT_TX_OUTER_IP_CKSUM, PKT_TX_OUTER_IPV4
and PKT_TX_OUTER_IPV6 respectively.
Rework csum forward engine and i40e PMD due to these changes.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some of the NICs supported by DPDK have a possibility to accelerate TCP
traffic by using segmentation offload. The application prepares a packet
with valid TCP header with size up to 64K and deleguates the
segmentation to the NIC.
Implement the generic part of TCP segmentation offload in rte_mbuf. It
introduces 2 new fields in rte_mbuf: l4_len (length of L4 header in bytes)
and tso_segsz (MSS of packets).
To delegate the TCP segmentation to the hardware, the user has to:
- set the PKT_TX_TCP_SEG flag in mbuf->ol_flags (this flag implies
PKT_TX_TCP_CKSUM)
- set the flag PKT_TX_IPV4 or PKT_TX_IPV6
- set PKT_TX_IP_CKSUM if it's IPv4, and set the IP checksum to 0 in
the packet
- fill the mbuf offload information: l2_len, l3_len, l4_len, tso_segsz
- calculate the pseudo header checksum without taking ip_len in account,
and set it in the TCP header, for instance by using
rte_ipv4_phdr_cksum(ip_hdr, ol_flags)
The API is inspired from ixgbe hardware (the next commit adds the
support for ixgbe), but it seems generic enough to be used for other
hw/drivers in the future.
This commit also reworks the way l2_len and l3_len are used in igb
and ixgbe drivers as the l2_l3_len is not available anymore in mbuf.
Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In test-pmd (rxonly.c), the code is able to dump the list of ol_flags.
The issue is that the list of flags in the application has to be
synchronized with the flags defined in rte_mbuf.h.
This patch introduces 2 new functions rte_get_rx_ol_flag_name()
and rte_get_tx_ol_flag_name() that returns the name of a flag from
its mask. It also fixes rxonly.c to use this new functions and to
display the proper flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Since the flags field is now 64-bits, we can allow one bit to be used to
indicate a control i.e. non-packet mbuf. Dedicate the high bit (bit 63)
for this purpose and add in a utility macro to test if a given mbuf has
the bit set or not.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The offload flags field (ol_flags) was 16-bits and had no further room
for expansion. This patch increases the field size to 64-bits, using up
the remaining reserved space in the single-cache-line mbuf.
NOTE: none of the values for existing flags have been changed, i.e. no
new numbers have been explicitly reserved between existing flag
definitions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In some cases we may want to tag a packet for a particular destination
or output port, so rename the "in_port" field in the mbuf to just "port"
so that it can be re-used for this purpose if an application needs it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The initial role of rte_ctrlmbuf is to carry generic messages (data
pointer + data length) but it's not used by the DPDK or it applications.
Keeping it implies:
- loosing 1 byte in the rte_mbuf structure
- having some dead code rte_mbuf.[ch]
This patch removes this feature. Thanks to it, it is now possible to
simplify the rte_mbuf structure by merging the rte_pktmbuf structure
in it. This is done in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated patch to HEAD.
* Modified patch to retain the old function names for ctrl mbufs as
macros. This helps with app compatibility, and allows the concept
of a control mbuf to be reintroduced via a single-bit flag in
a future change.
* Updated the packet framework ip_pipeline example application to
work following this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
