Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The driver supports VLAN filtering, but the option is not included in
the advertised list of capabilities. Thus any attempt to enable VLAN
filtering always fails. Update the list of offload capabilities to
include DEV_RX_OFFLOAD_VLAN_FILTER.
Fixes: 95e4a96ccb ("net/vmxnet3: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Mark Gillott <mgillott@vyatta.att-mail.com>
Acked-by: Yong Wang <yongwang@vmware.com>
This patch introduces:
- VMxnet3 v4 negotiation and,
- entirely guest-driven UDP RSS support.
VMxnet3 v3 already has UDP RSS support, however it
depends on hypervisor provisioning on the VM through
ESX specific flags, which are not transparent or known
to the guest later on.
Vmxnet3 v4 introduces a new API transaction which allows
configuring RSS entirely from the guest. This API must be
invoked after device shared mem region is initialized.
IPv4 ESP RSS (SPI based) is also available, but currently
there are no ESP RSS definitions on rte_eth layer to
handle that.
Signed-off-by: Eduard Serra <eserra@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Since below commit, several tx_prep functions are broken, they fail to
pass supported Tx offload features check:
PKT_TX_IPVx must be set when any PKT_TX_L4 checksum is requested,
but these values are not present in the mask of supported Tx offloads
of several drivers that advertise PKT_TX_L4_MASK.
So any packet sent to those drivers with a L4 checksum request and
one of PKT_TX_IPVx bit set is rejected by the tx prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ethdev flag RTE_ETH_DEV_CLOSE_REMOVE is set for drivers
having migrated to the new behaviour of rte_eth_dev_close().
As any other flag, it can be useful to know about its value
as soon as the port is probed.
Unfortunately, it was set inside the close operation,
just before being erased by memset() in rte_eth_dev_release_port().
The flag assignment is moved to the probing stage, so it can
be checked by the application in order to anticipate the behaviour.
Fixes: 42603bbdb5 ("net/mlx5: release port on close")
Fixes: 6c99085d97 ("net/vmxnet3: fix hot-unplug")
Fixes: 4d7877fde2 ("net/ena: remove resources when port is being closed")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The vmxnet3 driver can't call back into dev_close(), and possibly
dev_stop(), in dev_uninit(). When dev_uninit() is called, anything
that those routines would want to clean up has already been released.
Further, for complete cleanup, it is necessary to release any of the
queue resources during dev_close().
This allows a vmxnet3 device to be hot-unplugged without leaking
queues.
Also set RTE_ETH_DEV_CLOSE_REMOVE on close so that the port resources
can be deallocated.
Return EBUSY if remove is called before stop.
Fixes: dfaff37fc4 ("vmxnet3: import new vmxnet3 poll mode driver implementation")
Cc: stable@dpdk.org
Signed-off-by: Brian Russell <brussell@brocade.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The helper rte_eth_dma_zone_reserve() is called by PMDs
when probing a new port.
It creates a new memzone with an unique name.
The name of this memzone was using the name of the driver
doing the probe.
In order to avoid assigning the driver before the end of the probing,
the driver name is removed from these memzone names.
The ethdev name (data->name) is not used because it may be too long
and may be not set at this stage of probing.
Syntax of old name: <driver>_<ring>_<port>_<queue>
Syntax of new name: eth_p<port>_q<queue>_<ring>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
'stats_reset()' callback was missing because the device backend doesn't
support it.
This commit adds a workaround to this and implements the callback by
taking a snapshot of the stats (SNAPSHOT) each time 'stats_reset()'
is called. When getting stats with 'stats_get()', hw stats which
always increase reduce SNAPSHOT stats.
That's how we get the "real" stats since the last 'stats_reset()'.
Signed-off-by: Yogev Chaimovich <yogev@cgstowernetworks.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Note that the library built by meson will not have the _uio suffix:
librte_pmd_vmxnet3.so - as it follows the directory name, while the
legacy makefile rename it to librte_pmd_vmxnet3_uio.so.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev RX offloads API has changed since: commit ce17eddefc
("ethdev: introduce Rx queue offloads API")
This patch adopts the new RX Offload API in vmxnet3 driver.
Signed-off-by: Louis Luo <llouis@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Packets containing empty segments are dropped by hypervisor, prevent
this case by skipping empty segments in transmission.
Also drop empty mbufs to be sure that at least one segment is transmitted
for each mbuf.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
When several TCP fragments are contained in a packet that is only one mbuf
segment long, vmxnet3 receives an empty segment following first one, that
contains offload information. In current version, this segment is
propagated as is to upper application.
Remove those empty segments directly when receiving buffers, they may
generate unneeded extra processing in the upper application.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Not so old variants of vmxnet3 do not provide MSS value along with
LRO packet. When this case happens, try to guess MSS value with
information at hand.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Add support for IPv6, LRO and properly set packet type in all
supported cases.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
In case we are working on a multisegment buffer, most bit are set
in last segment of the buffer. Correctly look at those bits in eop part
of the rx_offload function.
Fixes: 2fdd835f99 ("vmxnet3: support jumbo frames")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Offloads are split between first and last segment of a packet.
Call a single vmxnet3_rx_offload function that will contain all
offload operations. This patch does not introduce any code modification.
Pass a vmxnet3_hw as parameter to the function, it is not presently
used in this patch, but will be later used for TSO offloads.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Rather than parsing IP header to get proper ptype to return, just return
RTE_PTYPE_L3_IPV4_EXT_UNKNOWN, that tells application that we have an IP
packet with unknown header length.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Yong Wang <yongwang@vmware.com>
The vmxnet3 never attempts link speed negotiation. As a virtual device
the link speed is vague at best. However, it is important for certain
applications, like bonding, to see a consistent link_status. 802.3ad
requires that only links of the same cost (link speed) be enslaved.
Keeping the link status consistent in vmxnet3 avoids races with bonding
enslavement.
Fixes: 1e3a958f40 ("ethdev: fix link autonegotiation value")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Vmxnet3 driver supports receive data ring viz. a set of small sized
buffers that are always mapped by the emulation. If a packet fits into
the receive data ring buffer, the emulation delivers the packet via the
receive data ring.
Increasing the receive data ring descriptor size from 128 to 256
showed performance gains as high as 5% for packets smaller than 256.
Signed-off-by: Shraddha Joshi <jshraddha@vmware.com>
Acked-by: Jin Heo <heoj@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Acked-by: Boon Ang <bang@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
This counter comes from a "hardware" register of the vmxnet3 device and
seems to behave like the MPC (Missed Packet Count) register of the Intel
NICs. So I think this data belongs in the imissed field rather than the
rx_nombuf field.
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Acked-by: Yong Wang <yongwang@vmware.com>
With icc (ICC) 18.0.1 20171018, -wd usage generates following warning:
icc: command line remark #10010: option '-wd3656' is deprecated and will
be removed in a future release. See '-help deprecated'
"icc -help deprecated" output is:
-wd use -diag-disable
Based on above information "-wd" converted to "-diag-disable"
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Also remove no longer necessary include of rte_atomic.h
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Bonding may examine the link properties to ensure that matching interfaces
are bound together. If the link is going to have fixed properties,
these need to remain consistent regardless of the link_status or the
state of the adapter.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
If a reconfiguration happens, queuedesc is reallocated. Any queues that
are preserved point to the previous queuedesc since the queues are only
configured during queue setup. Delay configuration of the shared queue
pointers until device start when queuedesc is no longer changing.
Fixes: 8618d19b52 ("net/vmxnet3: reallocate shared memzone on re-config")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
With bonding, after sending sufficient ipv4 packets,
bond_ethdev_rx_burst_8023ad() no longer recognizes LACP packets
because the packet_type is set to RTE_PTYPE_L3_IPV4.
Ensure packet_type is reset for non-ipv4 packets in vmxnet3_rx_offload.
Signed-off-by: George Wilkie <george.wilkie@intl.att.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
This operation is already done by the ethdev layer, it should not
be done by the driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are 3 kind of link data in ethdev:
- capabilities (rte_eth_dev_info)
- configuration (rte_eth_conf)
- status (rte_eth_link)
A bit-field is used for capabilities (rte_eth_dev_info.speed_capa) and
configuration (rte_eth_conf.link_speeds).
Bits are defined in ETH_LINK_SPEED_*.
Some numerical (ETH_SPEED_NUM_*) and boolean (ETH_LINK_*) values
are used for the link status (rte_eth_link.*).
There was a mistake in the comment of rte_eth_link.link_autoneg,
suggesting ETH_LINK_SPEED_[AUTONEG/FIXED] which are 0/1,
instead of ETH_LINK_[AUTONEG/FIXED] which are 1/0.
The drivers are fixed to use ETH_LINK_[AUTONEG/FIXED].
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
On behalf of the DPDK Technical board, Hemant Agrawal observed that the
DPDK project's Intellectual Property Policy (http://dpdk.org/about/charter)
requires 3-Clause BSD license or an exception approval. However, two
vmxnet3 source files have 2-Clause BSD license.
This patch modifies those licenses to 3-Clause BSD license.
Reported-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Cheryl Houser <chouser@vmware.com>
Acked-by: Bharat Mota <bmota@vmware.com>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
At the end of the queue release, we can free the containers for the
queue objects.
Fixes: dfaff37fc4 ("vmxnet3: import new vmxnet3 poll mode driver implementation")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
