When the input string is "key=[", the ending '\0' is replaced
by a ',', leading to a heap buffer overflow.
Check the content of ctx1 to avoid this problem.
Fixes: cc0579f2339a ("kvargs: support list value")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The return was not properly placed, and only the first test case
was validated.
Fixes: e495f5435524 ("kvargs: add test case in app/test")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Empty elements passed to the kvargs parser are silently
ignored. Examples of valid strings:
""
","
",,,,,,key=val,,,,"
Fix the unit tests to conform to this behavior.
Note: the test_invalid_kvargs() function is currently broken, which
explain why the tests were not failing. It is fixed in the next commit.
Fixes: e495f5435524 ("kvargs: add test case in app/test")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This is a helper function in case components would like to do more work
than just logging a message based on log level, like for example
collecting some stats if the log type is DEBUG etc..
A few existing relevant usage converted to this new API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When --no-huge mode is used, the memory is currently allocated with
mmap(NULL, ...). This is fine in most cases, but can fail in cases
where DPDK is run on a machine with an IOMMU that is of more limited
address width than that of a VA, because we're not specifying the
address hint for mmap() call.
Fix it by preallocating VA space before mapping it.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Jun W Zhou <junx.w.zhou@intel.com>
Currently, when we are creating DMA mappings for memory that's
either external or is backed by hugepages in IOVA as PA mode, we
assume that each page is necessarily discontiguous. This may not
actually be the case, especially for external memory, where the
user is able to create their own IOVA table and make it
contiguous. This is a problem because VFIO has a limited number
of DMA mappings, and it does not appear to concatenate them and
treats each mapping as separate, even when they cover adjacent
areas.
Fix this so that we always map contiguous memory in a single
chunk, as opposed to mapping each segment separately.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
The source callback list grows infinitely when more than alarm
is queued.
This fix recognizes that an alarm interrupt in FreeBSD should never
have more than one callback on its list, so if
rte_intr_callback_register() is called with an interrupt handle type
of RTE_INTR_HANDLE_ALARM, so if such an interrupt type already has a
non-empty list, then a new callback is not created, but the kevent
timer is restarted properly.
Fixes: 23150bd8d8a8 ("eal/bsd: add interrupt thread")
Cc: stable@dpdk.org
Signed-off-by: Mit Matelske <mit@pt.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
_cpuset TLS variable stores the CPU affinity of eal thread.
Populate the _cpuset TLS variable for control thread to
1) Make rte_thread_get_affinity() and eal_thread_dump_affinity
functional with control thread.
2) Quick access to cpu affinity.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add Travis CI jobs to run unit tests on aarch64 platform.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
As fast-tests suite generated with only applicable cases included,
hugepage is not a mandatory to run the test.
Ignore the result of hugepage set up, so that validation in environment
without hugepage can proceed.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
In environments where hugepage are not available, such as
containers, many cases in fast-tests suite should also run
if no-huge EAL option is used.
Flag is appended to each case in fast-tests suite to indicate
whether it lives with no-huge mode.
With the flag, fast-tests suite can be generated based on
detected hugepage availability of building environment.
All cases will be valid if hugepage is available, whereas
only applicable cases will be added if environment has no
hugepage support.
Suggested-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
When running with '--no-huge' flag, tests failed with messages as:
ACL context creation with invalid NUMA should have failed!
fbk hash creation should have failed
test_table_pipeline: Check pipeline invalid params failed.
These cases test against invalid socket ID as input parameter, and
expect error return. But function calls return success because
invalid sock ID is overwritten to SOCKET_ID_ANY when in no-huge mode.
The tests against invalid socket ID are skipped in no-huge mode.
Fixes: 5640171c528a ("malloc: fix external heap allocation in no-huge mode")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Concatenating to test_args if event_eth_tx_adapter_autotest is executed
makes all subsequent tests inherit from the drivers loading while this
is unneeded.
Fixes: 207b1c813f39 ("test: fix build without ring PMD")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Installing with ninja is quite verbose by default, hide ninja output under
TEST_MESON_BUILD_VERBOSE and TEST_MESON_BUILD_VERY_VERBOSE options.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fix check symbol change script to detect new diff file when
it is in between "--- /dev/null" to "b/lib/...".
Current awk line expects line to start with "a/..."
which is not always true for all diffs.
As a result if in_map was '1' earlier, it will not be changed
to '0' and we get check patch errors which are not true.
Fixes: 4bec48184e33 ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Honnappa and Konstantin contributed actively to the ring library
and volunteered to replace myself as maintainers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The 32-bit arm machine doesn't support unaligned memory access. It
will cause a bus error on aarch32 with the custom element size ring.
Thread 1 "test" received signal SIGBUS, Bus error.
__rte_ring_enqueue_elems_64 (n=1, obj_table=0xf5edfe41, prod_head=0, \
r=0xf5edfb80) at /build/dpdk/build/include/rte_ring_elem.h:177
177 ring[idx++] = obj[i++];
Fixes: cc4b218790f6 ("ring: support configurable element size")
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
If contigmem is not able to allocate all of the
requested buffers, it frees whatever buffers were
able to be allocated up until that point.
But the pointers are not set to NULL in that case.
After the load fails, the FreeBSD kernel will
immediately call the contigmem unload handler, which
tries to free the buffers again since the pointers
were not set to NULL.
It's not clear that we should just rely on the unload
handler getting called after load failure. So let's
keep the existing cleanup code in the load handler,
but explicitly set the pointers to NULL after freeing
them.
Fixes: 5f51eca22489 ("contigmem: free allocated memory on error")
Cc: stable@dpdk.org
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There is a non-optimal check if doorbell is needed present in the
mlx5_tx_handle_completion() function. Advancing a copy of the txq
consumer index and checking this copy with initial value causes
unnecessary memory loads and hurts the performance. It is better to
have a simple small boolean variable for this purpose. That allows
to eliminate all the excessive memory operations with the txq consumer
index and restore the performance of the tx completions.
Fixes: 1fd9af05e44e ("net/mlx5: update Tx error handling routine")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Previous fix added, at the end of functions
flow_dv_translate_item_ipv4() and flow_dv_translate_item_ipv6(), the
setting of cvlan_tag mask.
In the case of unspecified item (item->spec == null) these functions
return, and the new code section is not reached.
This patch moves the setting of cvlan_tag mask to be done before the
check of item->spec, to make sure it is always executed.
Fixes: 797329d6c4a1 ("net/mlx5: fix match on ethertype and CVLAN tag")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch makes IO memory allocation with socketid,
the txq or rxq descriptor and IO resource can be allocated with
socketid that passed by queue setup ops, which can improve
performance for cross-numa scene.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Adding API for axgbe_rxq_info_get, axgbe_txq_info_get
Signed-off-by: Amaranath Somalapuram <asomalap@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Adding API for priority_flow_ctrl_set.
Priority flow control to set water high and low,
pause_time and priority.
Signed-off-by: Amaranath Somalapuram <asomalap@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Adding api for flow_ctrl_get and flow_ctrl_set.
By default axgbe driver flow control is disabled.
Adding dpdk flow control to set water high and low.
Signed-off-by: Amaranath Somalapuram <asomalap@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
There is no reason to prevent the user from using zero metadata,
it indeed means no metadata, but sometimes the user may need to
report to datapath that there is no metadata anymore, which is
valid case.
Fixes: fcc8d2f716fd ("net/mlx5: extend flow metadata support")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The reason why PF cannot receive data normally is that vf performed
the clear_rar operation through dev close without adding a mac address.
This will cause the association between the index and rx address set
by VMDq to be cancelled,thus affecting the data reception of PF. The
correction method is to add a check action, and do not perform the
set_rar operation without adding a mac address to prevent affecting the
reception of data.
Fixes: 3c4270187518 ("net/ixgbe: support VF MAC address add/remove")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Apart from the 4-tuple (IP src/dst addresses and TCP/UDP src/dst
port addresses), there are only 40-bits available to match other
fields in packet headers. Not all combinations of packet header
fields can fit in the 40-bit tuple.
Currently, the combination of packet header fields to match are
configured via filterMode for LETCAM filters and filterMask for
HASH filters in firmware config files (t5/t6-config.txt). So, add
devargs to allow User to dynamically select the filterMode and
filterMask combination during runtime, without having to modify the
firmware config files and reflashing them onto the adapter. A table
of supported combinations is maintained by the driver to internally
translate the User specified devargs combination to hardware's internal
format before writing the requested combination to hardware
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add new firmware API FW_PARAM_DEV_FILTER_MODE_MASK to fetch
the filtermode and filtermask values configured in hardware,
which are used to validate the match combinations in the filter
spec before offloading the filter rules to hardware. For older
firmware that doesn't support the new API, fallback to older way
of directly reading from indirect registers
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to rewrite Source MAC addresses. The new Source
MAC address is written into a free entry in the SMT table
and the corresponding SMT index is used by hardware to
rewrite the Source MAC address of the packets hitting the
flow.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Source MAC Table (SMT) is used for storing Source MAC
addresses to be written in packets transmitted on the
wire. Hence, the SMT table can be used for overwriting
Source MAC addresses in packets, hitting corresponding
filter rules inserted by the rte_flow API.
Query firmware for SMT start and size information available
to the underlying PF. Allocate and maintain the corresponding
driver's copy of the hardware SMT table, with appropriate
refcount mechanism. If SMT information is not available, then
use the entire hardware SMT table.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support for overwriting destination MAC addresses.
The new MAC address is written into a free entry in the
L2T table and the corresponding L2T index is used by
hardware to overwrite the destination MAC address of the
packets hitting the flow
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match all packets received on the underlying VF.
Use new firmware API to fetch the Virtual Interface Number (VIN)
allocated to each VF by the firmware. The VIN is required to
write filter rules to match all packets on VFs, whose identifier
is beyond max 7-bit value (i.e. 127) in VIID.
If firmware doesn't support fetching the VIN information, then
fallback to manually retrieving the VIN value from the 7-bit field
in the VIID, which only supports in range of 0..127. In this case,
packets belonging to VFs, whose identifier is beyond 127 can't be
matched.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match all packets received on the underlying PF
Note that the same 17-bit hardware tuple is shared between QinQ
and PF match. Hence, match on either QinQ or PF only can be done
at a time. Both QinQ and PF match can't be enabled at the same time.
Also, remove check to reject rules without spec because
RTE_FLOW_ITEM_TYPE_PF doesn't require a spec. Due to this check
removal, RTE_FLOW_ITEM_TYPE_PHY_PORT item needs to be updated to
handle NULL spec
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match Type of Service (TOS) field in
IPv4/IPv6 header
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match fields in 802.1ad Q-in-Q VLAN packets.
Relax check for repeated pattern items for RTE_FLOW_ITEM_TYPE_VLAN
item, since the same item is used to represent both QinQ and VLAN
packets.
When QinQ match is enabled, the ethertype field in the hardware
spec must contain the innermost VLAN header's ethertype field,
and not the Ethernet header's ethertype field. The hardware
automatically searches for ethertype 0x88A8/0x8100 in Ethernet
header, when parsing incoming packet against QinQ/VLAN pattern,
respectively.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Make user filters a priority in EF10 datapath. When a manual
filter with a specification that is equal to an existing auto
filter is inserted, the manual filter:
- replaces auto filter if the specification is exclusive;
- is inserted along existing auto filter otherwise;
In the first case the auto filter that was replaced is saved.
This saved filter can be updated on filter reconfiguration and
is restored on the manual filter removal.
Fixes: e7cd430c864f ("net/sfc/base: import SFN7xxx family support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The code is refactored to make it more clear and allow for
more convenient further changes.
Fixes: e7cd430c864f ("net/sfc/base: import SFN7xxx family support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The automatic filter priority may only be used by filter implementation,
so reject the attempts to create such filters by client drivers.
Fixes: f9565517ff4f ("net/sfc/base: import filters support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Only implemented filter priorities are manual and auto. Remove
unused priorities since exposing unimplemented functionality
is of no benefit.
Tx filter specification default priority is changed to manual,
since required priority does not differ from it in the implementation.
Fixes: f9565517ff4f ("net/sfc/base: import filters support")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The priority should be explicitly set to manual for correct
usage of libefx filters.
Fixes: a9825ccf5bb8 ("net/sfc: support flow API filters")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Returned errors of ethdev callbacks are negative. Internal
sfc functions return positive errors, so convert them to
negative value.
Fixes: 9039c8125730 ("ethdev: change promiscuous callbacks to return status")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Minor spelling errors found by aspell and codespell
Fixes: 1daa33805824 ("ethdev: validate offloads set by PMD")
Fixes: 81f9db8ecc2c ("ethdev: add vlan offload support")
Fixes: c8231c63ddcb ("ethdev: insert Rx callback as head of list")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Any DPDK public header file which includes stdbool.h may conflict with
local definition of bool, if any, which further results in compilation
error. To avoid, used standard stdbool.h instead of defining bool
internally.
I observed this issue during a development where I included rte_uuid.h
into rte_ethdev.h. As rte_ethdev.h is included to PMD driver, it started
throwing error as given below:
CC ionic_rxtx.o
In file included from .../dpdk/build/include/rte_uuid.h:17:0,
from .../dpdk/build/include/rte_ethdev.h:161,
from .../dpdk/build/include/rte_ethdev_driver.h:18,
from .../dpdk/drivers/net/ionic/ionic_rxtx.c:34:
.../dpdk/drivers/net/ionic/ionic_osdep.h:48:17:
error: two or more data types in declaration specifiers
typedef uint8_t bool;
^
In file included from .../dpdk/drivers/net/ionic/ionic_dev.h:8:0,
from .../dpdk/drivers/net/ionic/ionic.h:13,
from .../dpdk/drivers/net/ionic/ionic_mac_api.h:8,
from .../dpdk/drivers/net/ionic/ionic_rxtx.c:45:
.../dpdk/drivers/net/ionic/ionic_osdep.h:48:1:
warning: useless type name in empty declaration
typedef uint8_t bool;
^~~~~~~
cc1: warning: unrecognized command line option
‘-Wno-address-of-packed-member’
.../dpdk/mk/internal/rte.compile-pre.mk:114:
recipe for target 'ionic_rxtx.o' failed
Fixes: 5ef518098ec6 ("net/ionic: register and initialize adapter")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Alfredo Cardigliano <cardigliano@ntop.org>
Currently, when promiscuous mode is enabled, it is just allowed to
accept all the unicast and broadcast packets in hns3 PF PMD driver. It
should also be able to receive multicast packets.
Fixes: 19a3ca4c99cf ("net/hns3: add start/stop and configure operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds promiscuous and allmulticast mode support for hns3 VF
PMD driver.
1) The promiscuous/allmulticast mode can be configured successfully only
based on the trusted VF device. If based on the non trusted VF
device, configuring promiscuous/allmulticast mode will fail. The hns3
VF device can be configured as trusted device by hns3 PF kernel
ethdev driver on the host by "ip link set <eth num> vf <vf id> turst
on" command.
2) After the promiscuous mode is configured successfully, hns3 VF PMD
driver can receive the ingress and outgoing traffic. In the words,
all the ingress packets, all the packets sent from the PF and other
VFs on the same physical port.
3) Note: Because of the hardware constraints, By default vlan filter is
enabled and couldn't be turned off based on VF device, so vlan filter
is still effective even in promiscuous mode. If upper applications
don't call rte_eth_dev_vlan_filter API function to set vlan based on
VF device, hns3 VF PMD driver will can't receive the packets with
vlan tag in promiscuous mode.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The hns3 PF/VF devices on the same port share the hardware MTU
configuration. Currently, we send mailbox to inform hns3 PF kernel
ethdev driver to finish hardware MTU configuration in hns3 VF PMD
driver, there is no need to stop the port for hns3 VF device, and
the MTU value issued by hns3 VF PMD driver must be less than or
equal to PF's MTU.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when receiving and transmitting packets based on hns3 network
engine there are probably unexpected and redundant Tx interrupts if Rx
interrupt is enabled.
The root cause as below:
Tx and Rx queues with the same number share the interrupt vector in hns3
network engine, and in this case there are the residual hardware mapping
relationship configuration between queue and interrupt vector configured
in hns3 kernel ethdev driver.
We should clear the all hardware mapping relationship configurations in
the initialization. Because of the hardware constraints, we have to
implement clearing the relationship by binding all queues to the last
interrupt vector and reserving the last interrupt vector, this method
results in a decrease of the maximum queues when upper applications call
the rte_eth_dev_configure API function to enable Rx interrupt.
Fixes: 02a7b55657b2 ("net/hns3: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds TCP segment offload support for hns3 PMD driver.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
