Adding support for DPDK packet parsing logic for LX2
platform to accommodate the new FRC format introduced in LX2.
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Setting correct frame size in dpaa2_dev_mtu_set
api call. Also correcting the correct max frame size
setting in hardware while dev_configure for jumbo frames
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
This patch expose the dpaa2 soc platform family type.
This is required to make some soc variant specific
decision during configuration and runtime.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for dynamic iova detection for DPAA2
devices and use of virtual address in such cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA and DPAA2 drivers were using memseg physaddr, which
has been deprecated.
Fixes: 7ba49d39f14c ("mem: rename segment address from physical to IOVA")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Fix the following compilation error when compiling
with ARM BE compiler.
drivers/bus/dpaa/include/fsl_qman.h:1997:25:
error: statement with no effect [-Werror=unused-value]
#define hw_sg_to_cpu(x) (x)
Fixes: c47ff048b99a ("bus/dpaa: add QMAN driver core routines")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Changing the EQCR stashing threshold boosts the performance
of l3fwd application on LS2088 by more than 20% as it helps
in burst packet processing at the Tx side. CPU is immediately
informed about the empty EQCR entries once consumed by the
hardware.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
For virtio legacy device, testpmd startup fails when using uio_pci_generic.
The issue is caused by invoking the function pci_ioport_map. The correct
value of intr_handle.type is already set before calling it, we should avoid
overwriting the default value "RTE_INTR_HANDLE_UNKNOWN" in this function.
Besides, the removal has no harm to other cases because it is set to 0 by a
memset on the whole struct during allocation in the function pci_scan_one.
Such assignments are removed in the meanwhile in pci_uio_map_resource(),
pci_vfio_map_resource_primary() and pci_vfio_map_resource_secondary() in
order to keep consistencies and avoid future questions.
Fixes: 756ce64b1ecd ("eal: introduce PCI ioport API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
The scan callback allows to spawn a vdev automatically
given some custom scan rules.
It is especially useful to create a TAP device automatically
connected to a netdevice as remote.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
In real life, kernel version is only weakly corolated with presence
or absence of defines in header files. Instead, check directly if
the needed value is defined.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This fixes the use of an never defined PPC64 define in
ret_pci_get_iommu_class.
Fixes: b48e0e2d9cb4 ("bus/pci: fix IOMMU class for sPAPR")
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Use specialized dynamic log type for vdev bus logging.
Suggested-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Suggested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The function pci_get_sysfs_path was moved from EAL to the PCI driver.
The namespace is now fixed by adding "rte_" prefix.
The map files are fixed by removing the symbol from EAL and adding
it to the PCI driver.
It is an API break but it is probably not used by applications.
Anyway this API is already broken by the move in a new header file.
Fixes: c752998b5e2e ("pci: introduce library and driver")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
PPC64 sPAPR iommu does not support iova as va.
Use pa mode instead.
Fixes: 815c7deaed2d ("pci: get IOMMU class on Linux")
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mem_virt2phy() is kept and used in functions which
works only with physical addresses.
For all other calls this function is replaced by rte_mem_virt2iova()
which does a direct mapping (no conversion) in the VA case.
Note: the new function rte_mem_virt2iova() function matches the
behaviour implemented in rte_mem_virt2phy() by the commit
680f6c12600f ("mem: honor IOVA mode in virt2phy")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The file rte_config.h is generated and automatically included
with -include option.
The explicit includes in drivers and libraries are useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When moving the library dependencies handling from top Makefiles
to library Makefiles, the list core-libs became useless.
Fixes: cbc12b0a96f5 ("mk: do not generate LDLIBS from directory dependencies")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some symbols were introduced with the wrong prefix.
Add the usual "rte_" prefix when needed.
Fixes: c752998b5e2e ("pci: introduce library and driver")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Exposed VFIO functions simply uses a "vfio" prefix.
Use the proper "rte_vfio" prefix for those symbols.
Fixes: 279b581c897d ("vfio: expose functions")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
If the device is not capable of resetting, then Linux kernel updates
the errno as EINVAL.
http://elixir.free-electrons.com/linux/v4.9/source/drivers/vfio/pci/vfio_pci.c#L887
Honor the EINVAL errno value to avoid pci vfio setup failure.
Fixes: f25f8f367644 ("bus/pci: check VFIO reset ioctl error")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Revert back to using VFIO_PRESENT as a marker to enable compilation
of VFIO-related segments.
VFIO_PRESENT is the combination of user configuration RTE_EAL_VFIO and
kernel version support check.
eal_vfio.h VFIO_PRESENT related check ordered to be compatible with
rte_vfio.h one, no functional modification.
Fixes: 279b581c897d ("vfio: expose functions")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
When checking if any devices bound to uio, we did not exclude
those which are blacklisted (or in the case that a whitelist
is specified).
This patch fixes it by only checking whitelisted devices, or
not-blacklisted devices depending on the bus scan mode.
Fixes: 815c7deaed2d ("pci: get IOMMU class on Linux")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The following symbols are used by vfio implementations within the PCI bus.
They need to be publicly available for the PCI bus to be outside the
EAL.
+ vfio_enable;
+ vfio_is_enabled;
+ vfio_noiommu_is_enabled;
+ vfio_release_device;
+ vfio_setup_device;
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Various symbols are being used by DPAA Crypto driver which were not exposed
from DPAA bus during initial version. This breaks the shared build.
This patch also adds the LDLIBS line required after (cbc12b0a9) patch.
Fixes: c3e85bdcc6e6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For event dequeues for ethernet queues, a dpaa2_queue structure is
required to get the configuration for that ethernet queue. Based on
this configuration the rte_event is to be filled at the ingress side.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
With the IOVA auto detection changes, bus scan is performed before
memory initialization. DPAA bus scan must not use rte_malloc in
its path.
Fixes: cf408c22476c ("eal: auto detect IOVA mode")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Before this patch, the devices discovered from VFIO layer were
being added in the device list in the order received from directory
scan. This causes an issue in case devices are reordered.
This patch makes all the devices inserted in the device list in
sorted order according to their name.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
enable the printing of objects during debuging.
use RTE_LOG to avoid function name printing for object name.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
