RSS RETA should be updated and queried by application,
Add related ops ('.reta_update', '.reta_query') for DCF.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Dump Rx timestamp value into dynamic mbuf field by flex descriptor.
This feature is turned on by dev config "enable-rx-timestamp".
Currently, it's only supported under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add recommended matching list for ice PMD in DPDK 22.03.
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds quanta size configuration support.
Quanta size should between 256 and 4096, and be a product of 64.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Multi-Packet Rx queue uses PMD-managed buffers to store packets.
These buffers are externally attached to user mbufs.
This conflicts with the feature that allows using user-managed
externally attached buffers in an application.
Add the corresponding limitation to MLX5 documentation that MPRQ
and external data buffers cannot be used together.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
This patch adds mlx5 specifics description about
handling the Ethernet type by modify field action
for VLAN-ed traffic.
Fixes: 641dbe4fb0 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
A flow rule with sample action will be split into two sub flows,
and a tag action was added implicitly in the sample prefix sub flow,
the reserved metadata regC index was used for this tag action.
The reserved metadata regC was shared with metering action,
for ConnectX-5 trusted device (VF/SF), the reserved metadata regC was
invalid since PF only supported the legacy metering.
This patch adds the checking for the tag index and back to use the
application tag if a failure happened.
Fixes: a9b6ea45be ("net/mlx5: fix tag ID conflict with sample action")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Trusted VF is needed to offload rules with rte_flow to a group
that is bigger than 0.
The configuration is done in two parts: driver and FW.
This patch adds the needed steps to configure a VF to be trusted.
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
When E-Switch mode was enabled, the NIC egress flows was implicitly
appended with source vport to match on. If the metadata register C0
was used to maintain the source vport, it was initialized to zero
on packet steering engine entry, the flow could be hit only
if source vport was zero, the register C0 of the packet was not correct
to match in the TX side, this caused egress flow misses.
This patch:
- removes the implicit source vport match for NIC egress flow.
- rejects the NIC egress flows on the representor ports at validation.
- allows the internal NIC egress flows containing the TX_QUEUE items in
order to not impact hairpins.
Fixes: ce777b147b ("net/mlx5: fix E-Switch flow without port item")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add support queue/RSS action for external Rx queue.
In indirection table creation, the queue index will be taken from
mapping array.
This feature supports neither LRO nor Hairpin.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds matching on the optional fields (checksum/key/sequence)
of GRE header. The matching on checksum and sequence fields requests
support from rdma-core with the capability of misc5 and tunnel_header 0-3.
For patterns without checksum and sequence specified, keep using misc for
matching as before, but for patterns with checksum or sequence, validate
capability first and then use misc5 for the matching.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
'gre_option' flow item was missing in the feature list, adding it.
Fixes: f61490bdf2 ("ethdev: support GRE optional fields")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently inline inbound device usage is not default for eventdev,
patch renames force_inl_dev dev arg to no_inl_dev and enables inline
inbound device by default.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The HW steering uses async queue-based flow rules management
mechanism. The matcher and part of the actions have been
prepared during flow table creation. Some remaining actions
will be constructed during flow creation if needed.
A flow postpone attribute bit describes if flow management
should be applied to the HW directly. An extra push function
is provided to force push all the cached flows to the HW.
Once the flow has been applied to the HW, the pull function
will be called to get the queued creation/destruction flows.
The DR rule flow memory is represented in PMD layer instead
of allocating from HW steering layer. While destroying the
flow, the flow rule memory can only be freed after the CQE
received.
The HW queue job descriptor is currently introduced to convey
the flow information and operation type between the flow
insertion/destruction in the pull function.
This commit adds the basic flow queue operation for:
rte_flow_async_create();
rte_flow_async_destroy();
rte_flow_push();
rte_flow_pull();
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The new hardware steering engine relies on using dedicated steering WQEs
instead of writing to the low-level steering table entries directly.
In the first implementation the hardware steering engine supports the
new queue based Flow API, the existing synchronous non-queue based Flow
API is not supported.
A new dv_flow_en value 2 is added to manage mlx5 PMD steering engine:
dv_flow_en rte_flow API rte_flow_async API
------------------------------------------------
0 support not support
1 support not support
2 not support support
This commit introduces the extra dv_flow_en = 2 to specify the new
flow initialize and manage operation routine.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The hardware since ConnectX-7 supports waiting on
specified moment of time with new introduced wait
descriptor. A timestamp can be directly placed
into descriptor and pushed to sending queue.
Once hardware encounter the wait descriptor the
queue operation is suspended till specified moment
of time. This patch update the Tx datapath to handle
this new hardware wait capability.
PMD documentation and release notes updated accordingly.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add support for inline inbound SPI range via devargs
instead of just max SPI value and range being 0..max.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support for priority flow control support for CNXK
platforms.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The "tx_db_nc" devarg forces doorbell register mapping to non-cached
region eliminating the extra write memory barrier. This argument was
used in creating the UAR for Tx and thus affected its performance.
Recently [1] its use has been extended to all UAR creation in all mlx5
drivers, and now its name is no longer so accurate.
This patch changes its name to "sq_db_nc" to suit any send queue that
uses it. The old name will still work for backward compatibility.
[1] commit 5dfa003db5 ("common/mlx5: fix post doorbell barrier")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Adds new documentation for MLX5 common driver that contains:
- Its features list (doesn't exist for now).
- Its devargs description.
- Device configuration information and tutorial.
- Quick Start Guide for Mellanox OFED/EN.
Move into this doc all shared information from other MLX5 PMD docs and
add them reference to new common doc.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Vectorized routines were removed in result of Tx datapath refactoring,
and devarg keys documentation was updated.
However, more updating should have been done. In environment variables
doc, there was explanation according to vectorized Tx which isn't
relevant anymore.
This patch removes this irrelevant explanation.
Fixes: a6bd4911ad ("net/mlx5: remove Tx implementation")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The default missing Tx completion timeout was set to 5 seconds.
In order to provide users with the interface to control this timeout
to adjust it with the application's watchdog, the device argument for
controlling this value was added.
The parameter is called 'miss_txc_to' and can be modified using the
devargs interface:
./app -a <bdf>,miss_txc_to=UINT_NUMBER
This parameter accepts values from 0 to 60 and indicates number of
seconds after which the Tx packet will be considered as missing.
HW hints for the Tx completions timeout were removed to do not overwrite
parameter from the user. Also specifying default Tx completion timeout
value was moved from the configuration to init phase in order to
simplify default value assignment.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
ENA driver did not allow applications to call tx_cleanup. Freeing Tx
mbufs was always done by the driver and it was not possible to manually
request the driver to free mbufs.
Modify ena_tx_cleanup function to accept maximum number of packets to
free and return number of packets that was freed.
Signed-off-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Originally, the ena_com memzone counter was shared by ports, which
caused the memzones to be harder to identify and could potentially
lead to race and because of that the counter had to be atomic.
This atomic counter was global variable and it couldn't work in the
multiprocess implementation.
The memzone is now being identified by the local to port memzone counter
and the port ID - both of those information can be found in the shared
data, so it can be probed easily.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
When an AF_XDP PMD is created without specifying the 'start_queue', the
default Rx queue associated with the socket will be Rx queue 0. A common
scenario encountered by users new to AF_XDP is that they create the
socket on queue 0 however their interface is configured with many more
queues. In this case, traffic might land on for example queue 18 which
means it will never reach the socket.
This commit updates the AF_XDP documentation with instructions on how to
configure the interface to ensure the traffic will land on queue 0 and
thus reach the socket successfully.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When libxdp is used, the LIBXDP_OBJECT_PATH environment variable must be
set to the location of where libxdp placed its bpf object files. This is
usually in /usr/local/lib/bpf or /usr/local/lib64/bpf. Failure to do so
will result in the PMD not initialising correctly as the bpf program is
not found. Document this requirement.
Also, mention that the following logs which are generated on application
launch can be ignored:
libbpf: elf: skipping unrecognized data section(7) .xdp_run_config
libbpf: elf: skipping unrecognized data section(8) xdp_metadata
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Secondary process support had been disabled for the AF_XDP PMD because
there was no logic in place to share the AF_XDP socket file descriptors
between the processes. This commit introduces this logic using the IPC
APIs.
Rx and Tx are disabled in the secondary process due to memory mapping of
the AF_XDP rings being assigned by the kernel in the primary process only.
However other operations including retrieval of stats are permitted.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Support to configure LED in firmware. Driver commands firmware to turn
the LED on and off. And OEM customize their LED solutions in firmware.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
MPRQ cannot be used in multi-process applications because of
externally attached MPRQ buffers. A callback is registered by
a primary process to free MPRQ buffers once they are no longer
needed. But this information is shared among all the processes.
The virtual address of the mlx5_mprq_buf_free_cb function is
different in a secondary process, which leads to a segmentation
fault. Document that MPRQ is not supported in a multi-process
app, since there is no way to find out if this is the one.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch supports drop any and steer all to queue in switch
filter. Support new rte_flow pattern any to handle all packets.
The usage is listed below.
1. drop any:
flow create 0 ingress pattern any / end actions drop / end
All packets received in port 0 will be dropped.
2. steer all to queue:
flow create 0 ingress pattern any / end actions queue index 3 / end
All packets received in port 0 will be steered to queue 3.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
IP Reassembly is a costly operation if it is done in software.
The operation becomes even more costlier if IP fragments are encrypted.
However, if it is offloaded to HW, it can considerably save application
cycles.
Hence, a new offload feature is exposed in eth_dev ops for devices which
can attempt IP reassembly of packets in hardware.
- rte_eth_ip_reassembly_capability_get() - to get the maximum values
of reassembly configuration which can be set.
- rte_eth_ip_reassembly_conf_set() - to set IP reassembly configuration
and to enable the feature in the PMD (to be called before
rte_eth_dev_start()).
- rte_eth_ip_reassembly_conf_get() - to get the current configuration
set in PMD.
Now when the offload is enabled using rte_eth_ip_reassembly_conf_set(),
the resulting reassembled IP packet would be a typical segmented mbuf in
case of success.
And if reassembly of IP fragments is failed or is incomplete (if
fragments do not come before the reass_timeout, overlap, etc), the mbuf
dynamic flags can be updated by the PMD. This is updated in a subsequent
patch.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Based on device support and use-case need, there are two different ways
to enable PFC. The first case is the port level PFC configuration, in
this case, rte_eth_dev_priority_flow_ctrl_set() API shall be used to
configure the PFC, and PFC frames will be generated using based on VLAN
TC value.
The second case is the queue level PFC configuration, in this
case, Any packet field content can be used to steer the packet to the
specific queue using rte_flow or RSS and then use
rte_eth_dev_priority_flow_ctrl_queue_configure() to configure the
TC mapping on each queue.
Based on congestion selected on the specific queue, configured TC
shall be used to generate PFC frames.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
AF_XDP support is deprecated in libbpf since v0.7.0 [1]. The libxdp library
now provides the functionality which once was in libbpf and which the
AF_XDP PMD relies on. This commit updates the AF_XDP meson build to use the
libxdp library if a version >= v1.2.2 is available. If it is not available,
only versions of libbpf prior to v0.7.0 are allowed, as they still contain
the required AF_XDP functionality.
libbpf still remains a dependency even if libxdp is present, as we use
libbpf APIs for program loading.
The minimum required kernel version for libxdp for use with AF_XDP is v5.3.
For the library to be fully-featured, a kernel v5.10 or newer is
recommended. The full compatibility information can be found in the libxdp
README.
v1.2.2 of libxdp includes an important fix required for linking with DPDK
which is why this version or greater is required. Meson uses pkg-config to
verify the version of libxdp on the system, so it is necessary that the
library is discoverable using pkg-config in order for the PMD to use it. To
verify this, you can run: pkg-config --modversion libxdp
[1] https://github.com/libbpf/libbpf/commit/277846bc6c15
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
eCPRI message can be over Ethernet layer (.1Q supported also) or over
UDP layer. Message header formats are the same in these two variants.
Only up though the first packet header in the PDU can be matched.
RSS on the eCPRI payload is not supported.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The KNI PMD name should be "net_kni".
Fixes: 75e2bc54c0 ("net/kni: add KNI PMD")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Users can create the desired number of RxQ and TxQ in DPDK. For
example, if the number of RxQ = 2 and the number of TxQ = 5,
a total of 8 file descriptors will be created for a tap device,
including RxQ, TxQ, and one for keepalive. The RxQ and TxQ
with the same ID are paired by dup(2).
In this scenario, Kernel will have 3 RxQ where packets are
incoming but not read. The reason for this is that there are only
2 RxQ that are polled by DPDK, while there are 5 queues in Kernel.
This patch add a checking if DPDK has appropriate numbers of
queues to avoid unexpected packet drop.
Signed-off-by: Nobuhiro Miki <nmiki@yahoo-corp.jp>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If hardware supports IEEE 1588 PTP, PTP capability will be set.
Currently, vec and sve burst is unsupported when PTP capability is set.
For sake of Rx/Tx performance, IEEE 1588 PTP is not supported in sve or
vec burst mode. When enabling IEEE 1588 PTP, Rx/Tx burst mode should be
simple or common. Rx/Tx burst mode could be set like this, for example:
-a 0000:35:00.0,rx_func_hint=common,tx_func_hint=common
This patch supports vec and sve burst when PTP is disabled. And only
support simple or common burst When PTP is enabled.
Fixes: 38b539d96e ("net/hns3: support IEEE 1588 PTP")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Adding changes to configure switch header type pre_l2 for cnxk.
pre_l2 headers are custom headers placed before the ethernet
header. Along with switch header type, user needs to provide the
offset within the custom header that holds the size of the
custom header and mask for the size within the size offset.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
Provides ethdev callback support of rx_queue_count,
rx_descriptor_status and tx_descriptor_status.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Recent VIC models can parse GENEVE, including options, and inner
packet headers. Enable GENEVE header and option flow items. Currently,
only the first option that follows the GENEVE header can be matched,
and the GENEVE header item must specify option length.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This patch adds support for level 2 for QoS shaping.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add missing capability for outer UDP Tx checksum.
Also fixed the feature list in ice_dcf.ini
Fixes: bf89db4409 ("net/ice: complete device info get in DCF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules on SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per the deprecation notice, In the view of enabling unified driver
for octeontx2(cn9k)/octeontx3(cn10k), removing drivers/octeontx2
drivers and replace with drivers/cnxk/ which
supports both octeontx2(cn9k) and octeontx3(cn10k) SoCs.
This patch does the following
- Replace drivers/common/octeontx2/ with drivers/common/cnxk/
- Replace drivers/mempool/octeontx2/ with drivers/mempool/cnxk/
- Replace drivers/net/octeontx2/ with drivers/net/cnxk/
- Replace drivers/event/octeontx2/ with drivers/event/cnxk/
- Replace drivers/crypto/octeontx2/ with drivers/crypto/cnxk/
- Rename config/arm/arm64_octeontx2_linux_gcc as
config/arm/arm64_cn9k_linux_gcc
- Update the documentation and MAINTAINERS to reflect the same.
- Change the reference to OCTEONTX2 as OCTEON 9. Old release notes and
the kernel related documentation is not accounted for this change.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
