For vhost-switch sample, the old guide takes too many words on
vhost-cuse, which is mainly due to vhost-cuse is invented before
vhost-user.
Now vhost-cuse is removed, meaning the best part of the doc is useless.
Instead of amending one piece here and there, this patch simply removes
the most part of the doc and replace it with a simple test guide.
For tep_term sample, mainly for removing the part has "vhost-cuse".
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This is to clarify the scope of these documents that are more tools than
sample applications.
Also this is a preparation step to add more tools and generate man pages
off of their rst files.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <lboccass@brocade.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The note i.e. "The dpdk-pdump tool can only be used in
conjunction with a primary process which has the packet
capture framework initialized already" is added to
doc/guides/sample_app_ug/pdump.rst to facilitate
easy understanding on the usage of the tool.
Suggested-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
- Fix copy/paste error in description of how to capture both rx
& tx traffic in a single pcap file
- Replace duplicate word with what original author presumably
intended, such that description now makes sense
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
l2fwd could be useful for testing virtual devices without the need
of physical ones.
To achieve this, this patch adds a new option to enable/disable the
MAC addresses updating done at forwarding time: --[no-]mac-updating
It enables the use of l2fwd for basic VM to VM communication.
By default, MAC address updating remains enabled, to keep consistency
with previous usage.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
RFC3686: Using AES Counter (CTR) Mode With IPsec ESP.`
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. A command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When VMDQ is enabled, different NICs have different behaviors for
disabling VLAN strip. In detail, i40e only enables/disables it of
PF's main vsi; fm10k cannot disable VLAN strip, etc. We now remove
this option, --vlan-strip, to reduce any confusion. And now, VLAN
strip will be enabled and cannot be disabled.
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The following tools may be installed system-wide.
It may be cleaner and more convenient to find them with the same
dpdk- prefix (especially for autocompletion).
Moreover, the script dpdk_nic_bind.py deserves a new name because it is
not restricted to NICs and can be used for e.g. crypto.
These files are renamed:
pmdinfogen -> dpdk-pmdinfogen
pmdinfo.py -> dpdk-pmdinfo.py
dpdk_pdump -> dpdk-pdump
dpdk_proc_info -> dpdk-procinfo
dpdk_nic_bind.py -> dpdk-devbind.py
setup.sh -> dpdk-setup.sh
The tools pmdinfogen, pmdinfo.py and dpdk_pdump are new in 16.07.
The scripts dpdk_nic_bind.py and setup.sh may have been used with
previous releases by end users. That's why a symbolic link still
provide the old name in the installed tools directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Fix warnings raised by Python Sphinx 1.4.5:
guides/sample_app_ug/ip_pipeline.rst:334:
WARNING: Could not lex literal_block as "ini". Highlighting skipped.
guides/sample_app_ug/l2_forward_real_virtual.rst:467:
WARNING: Could not lex literal_block as "c". Highlighting skipped.
guides/sample_app_ug/l3_forward.rst:293:
WARNING: Could not lex literal_block as "c". Highlighting skipped.
guides/sample_app_ug/vm_power_management.rst:162:
WARNING: Could not lex literal_block as "xml". Highlighting skipped.
These warnings arise from invalid syntax in code-block directives.
Fixes: f1e779ec5b50 ("doc: update ip pipeline app guide")
Fixes: d0dff9ba445e ("doc: sample application user guide")
Fixes: c75f4e6a7a2b ("doc: add vm power mgmt app")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
- Fix vhost setup flags
- Add minor edits to improve readability and consistency
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The commit cb6696d22023 ("drivers: update registration macro usage")
changes the name from virtio-user to virtio_user, because hyphen
cannot be used in a C symbol name. However, this commit does not
update the strings in docs and source code, which could lead to
failure to start this device as per the docs.
This patch updates related strings in the docs and source code.
Fixes: cb6696d22023 ("drivers: update registration macro usage")
Reported-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Added a missing note about dependencies on libpcap and
CONFIG_RTE_LIBRTE_PMD_PCAP flag that pdump tool has.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since users of the pdump library and tool can chose to have their own
server and client paths, it is must for the pdump tool to use the same
server socket path that was used by primary application while
initializing packet capture framework by rte_pdump_init() or
rte_pdump_set_socket_dir() APIs.
To pass the socket path info to pdump tool a new optional command
line options "server-socket-path" and "client-socket-path" are added.
"client-socket-path" is also added, if the users want to have client
sockets in their own defined paths.
Updated pdump tool guide with the new changes.
Fixes: caa7028276b8 ("app/pdump: add tool for packet capturing")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update l3fwd example usage and documentation with missing options.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add a new virtual device named virtio-user, which can be used just like
eth_ring, eth_null, etc. To reuse the code of original virtio, we do
some adjustment in virtio_ethdev.c, such as remove key _static_ of
eth_virtio_dev_init() so that it can be reused in virtual device; and
we add some check to make sure it will not crash.
Configured parameters include:
- queues (optional, 1 by default), number of queue pairs, multi-queue
not supported for now.
- cq (optional, 0 by default), not supported for now.
- mac (optional), random value will be given if not specified.
- queue_size (optional, 256 by default), size of virtqueues.
- path (madatory), path of vhost user.
When enable CONFIG_RTE_VIRTIO_USER (enabled by default), the compiled
library can be used in both VM and container environment.
Examples:
path_vhost=<path_to_vhost_user> # use vhost-user as a backend
sudo ./examples/l2fwd/build/l2fwd -c 0x100000 -n 4 \
--socket-mem 0,1024 --no-pci --file-prefix=l2fwd \
--vdev=virtio-user0,mac=00:01:02:03:04:05,path=$path_vhost -- -p 0x1
Known issues:
- Control queue and multi-queue are not supported yet.
- Cannot work with --huge-unlink.
- Cannot work with no-huge.
- Cannot work when there are more than VHOST_MEMORY_MAX_NREGIONS(8)
hugepages.
- Root privilege is a must (mainly becase of sorting hugepages according
to physical address).
- Applications should not use file name like HUGEFILE_FMT ("%smap_%d").
- Cannot work with vhost-net backend.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
1. add KNI support to the IP Pipeline sample Application
2. some bug fix
3. update doc
4. add config file with two KNI interfaces connected using
a Linux kernel bridge
Signed-off-by: WeiJie Zhuang <zhuangwj@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The new pdump tool is added for packet capturing on dpdk.
This tool runs as secondary process by default.
Tool facilitates the command line options like
port, device_id, queue which user should pass on
to the tool to request the packet capture on those devices.
Tool creates the rte ring, mempool and pcap vdev and
calls the enable API of the pdump library with port/device_id,
queue, ring and mempool as arguments to enable the packet
capture on specific devices and gets the packets from the
primary process over the ring. Once the packets are
received, those packets will be send to the pcap vdev.
Tool can be terminated by using ctrl+c(SIGINT) upon which tool
calls the disable API of the pdump library to disable the packet capture
and dequeues the rest of the packets from the ring and sends them on
to the pcap vdev, then after releases all allocated resources.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Corrected a typo in application name.
Corrected authentication algorithm to fit the sample 16-byte
authentication key.
Fixes: ba7b86b1 ("doc: add l2fwd-crypto sample app guide")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
It's reported that it's has not been working for a long while. And due
to it's complex, it's better to redesign it than to fix it to make it
work again.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
As a example to use ptype info, l3fwd needs firstly to use
rte_eth_dev_get_supported_ptypes() API to check if device and/or
its PMD driver will parse and fill the needed packet type; if not,
use the newly added option, --parse-ptype, to analyze it in the
callback softly.
As the mode of EXACT_MATCH uses the 5 tuples to caculate hash, so
we narrow down its scope to:
a. ip packets with no extensions, and
b. L4 payload should be either tcp or udp.
Note: this patch does not completely solve the issue, "cannot run
l3fwd on virtio or other devices", because hw_ip_checksum may be
not supported by the devices. Currently we can:
a. remove this requirements, or
b. wait for virtio front end (pmd) to support it.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch implements PQoS as a sample application.
PQoS allows management of the CPUs last level cache,
which can be useful for DPDK to ensure quality of service.
The sample app links against the existing 01.org PQoS library
(https://github.com/01org/intel-cmt-cat).
White paper demonstrating example use case "Increasing Platform Determinism
with Platform Quality of Service for the Data Plane Development Kit"
(http://www.intel.com/content/www/us/en/communications/increasing-platform-determinism-pqos-dpdk-white-paper.html)
Signed-off-by: Wojciech Andralojc <wojciechx.andralojc@intel.com>
Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
Signed-off-by: Marcel D Cornu <marcel.d.cornu@intel.com>
Currently, the example vmdq_dcb only works on Intel(R) 82599 NICs.
This patch extends this sample to make it work both on Intel(R) 82599
and X710/XL710 NICs by making the following changes:
1. add VMDQ base queue checking to avoid forwarding on PF queues.
2. assign each VMDQ pool to a MAC address.
3. add more arguments (nb-tcs, enable-rss) to change the default
setting
4. extend the max number of queues from 128 to 1024.
This patch also reworks the user guide for the vmdq_dcb sample.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Sample app implementing an IPsec Security Geteway.
The main goal of this app is to show the use of cryptodev framework
in a "real world" application.
Currently only supported static IPv4 ESP IPsec tunnels for the following
algorithms:
- Cipher: AES-CBC, NULL
- Authentication: HMAC-SHA1, NULL
Not supported:
- SA auto negotiation (No IKE implementation)
- chained mbufs
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes some mismatches between the keepalive code
and the docs. Struct names, and descriptions are not in line
with the codebase.
Fixes: e64833f2273a ("examples/l2fwd-keepalive: add sample application")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
MANY references in the sample applications user guide are wrong because
they are hard-coded and section numbers have changed over the time.
This patch changes thoses references to dynamic ones, in this way if
section numbers change the reference get updated automatically.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
It was requested by Intel, more than one year ago, to replace the name
"Intel DPDK" by "DPDK".
Some references to the old name were still in some docs and code comments,
leading to confusion.
Fixes: ac8ada004c12 ("doc: remove Intel references from release notes")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Remove **Contents** and |Today| from the rst doc index files since
these are already added automatically to PDF files and are of
little value to the Html files where the Contents is shown in a
sidebar.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
test_mp_secondary was initially added by mistake.
rte_snprintf has been removed.
Fixes: 9d41beed24b0 ("lib: provide initial versioning")
Fixes: 3185322809c1 ("eal: remove rte_snprintf")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix typos in sample console commands.
Remove "user@target:~$" prefixes in command lines.
Add --socket-mem 1024 to vhost-switch command lines.
Without the --socket-mem parameter all hugepages will be allocated
to vhost-switch, leaving no memory for the VM.
Add --disable-hw-vlan-filter parameter to testpmd command lines.
Without this parameter testpmd fails on startup in the VM.
Increase value of --sock-mem parameter to testpmd as original
value was too small.
Fixes: d0dff9ba445e ("doc: sample application user guide"
Fixes: 9bc23cb8209c ("doc: add vhost-user to sample guide")
Fixes: 43866bf71d58 ("doc: fix vhost sample parameter")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This commit adds the sample application user guide for the
performance thread sample application.
Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Further enhancements to the userspace ethtool implementation that was
submitted in 2.1 and packaged as a self-contained sample application.
Implements an rte_ethtool shim layer based on rte_ethdev API, along
with a command prompt driven demonstration application.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Fix the examples in the netmap compatibility sample application
docs which referred to the packet_reordering application.
Also fix some minor rst formatting issues.
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix repeated typo in the "Compiling the Application" section of
almost all of the sample app docs.
This generally gets copied into new sample app guides.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In order to be installed system-wise, this application needs
a prefix. So it makes clear that it is DPDK related.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Add a sample app guide for the ptpclient application.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
This patch originates from the patch:
"Patch for Qemu wrapper for US-VHost to ensure Qemu process ends when
VM is shutdown", http://dpdk.org/ml/archives/dev/2014-June/003606.html
Also update the vhost sample guide doc.
Signed-off-by: Claire Murphy <claire.k.murphy@intel.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
This commit removes the dev-index, so update the doc for this change:
Fixes: 17b8320a3e11 ("vhost: remove index parameter")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
