Add support for raw flow, which can be used for any
protocol rules.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TC distribution size is set with dist_queues or
nb_rx_queues % dist_queues in order of TC priority.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1) dpni_set_rx_hash_dist and dpni_set_rx_fs_dist used for TC
configuration instead of dpni_set_rx_tc_dist. Otherwise,
re-configuration of default TC of QoS fails.
2) Default miss action is to drop. "export
DPAA2_FLOW_CONTROL_MISS_FLOW=flow_id" is used receive the missed
packets from flow with flow ID specified.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In HW/MC logical, QoS setup should follow FS setup.
In addition, Skip QoS setup if MAX TC number of DPNI is set 1.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Check flow attributions and actions before creating flow.
Otherwise, the QoS table and FS table need to re-build
if checking fails.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Make more sense to use RXQ index for queue distribution
instead of flow ID.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Default distribution size of TC is 1, which is limited by MC. We have to
set the distribution size for each TC to support multiple RXQs per TC.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Discriminate between IPv4 and IPv6 in generic IP flow setup.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If entry size is not bigger than 27, MC alloc one TCAM entry,
otherwise, alloc 2 TCAM entries.
Extracts size by HW must be not bigger than TCAM entry size(27 or 54).
So define the flow entry size as 54.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Calculate QoS/FS entry index by group and priority of flow.
1)The less index of entry, the higher priority of flow.
2)Verify if the flow with same group and priority has been added before
creating flow.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Define extracts support for each protocol and check the fields of each
pattern before building extracts of QoS/FS table.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
1) Support QoS extracts and TC extracts for multiple TCs.
2) Protocol type of L2 extract is used to parse L3.
Next protocol of L3 extract is used to parse L4.
3) generic IP key extracts instead of IPv4 and IPv6 respectively.
4) Special for IP address extracts:
Put IP(v4/v6) address extract(s)/rule(s) at the end of extracts array
to make rest fields at fixed position.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Dynamic flow used instead of layout defined.
The actual key/mask size depends on protocols and(or) fields
of patterns specified.
Also, the key and mask should start from the beginning of IOVA.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch enables the packet timestamping
conditionally when Rx offload is enabled for timestamp.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Now that all libraries have a single version, we can drop the empty
stable blocks that had been added when moving symbols from stable to
internal ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Some compilers raise an error when declaring a variable
in the middle of a function. This is a C99 allowance.
Even if DPDK switches globally to C99 or C11 standard,
the coding rules are for declarations at the beginning
of a block:
http://doc.dpdk.org/guides/contributing/coding_style.html#local-variables
This coding style is enforced by adding a check of
the common patterns like "for (int i;"
The occurrences of the checked pattern are fixed:
'for *(\(char\|u\?int\|unsigned\|s\?size_t\)'
In the file dpaa2_sparser.c, the fix is to remove the unused macros.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently rte_mcp_ptr_list is being shared as a variable
across libs. This is only used in control path.
This patch change it to a exported function based access.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
When using a single TC, flow id is same as congestion group id.
However in case of multiple traffic classes, same flow id values
are used within each traffic class, which causes incorrect
traffic behavior e.g. halting of traffic.
This patches changes to use the cgid as the index which works
for single as well as multiple traffic classes.
Fixes: 13b856ac02 ("net/dpaa2: support taildrop on frame count basis")
Cc: stable@dpdk.org
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This change adds DPDMUX support to bifurcate traffic on
the basis of UDP destination port.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Update the portal allocation failure log to print the thread id
as well.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds default/preferred rx/tx params in dev info,
specially the advertised burst size.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When IOVA is physical address do not prefetch the annotation
of the next frame, as there is a cost involved there to convert
the physical address to virtual address.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fixed 10G port negotiation issue with another 10G/non 10G port.
When running testpmd with 10G interfaces on 10BaseT interface
on LS2088ARDB, the ports were showing link as down.
This was identified to be caused by the setting of link as down
during config.
Also, the line rate was not being updated in device link params,
thus having the incorrect link speed in status (as 0).
Fixes: c5acbb5ea2 ("net/dpaa2: support link status event")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a macro __rte_noinline, preventing function to be inlined,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The JUMBO frame handling in dpaa2_dev_mtu_set api was not correct.
When frame_size is greater than RTE_ETHER_MAX_LEN, the
intention is to add JUMBO flag in rx offload while it was resetting
all other flags other than JUMBO as AND operator was used instead of OR.
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Cc: stable@dpdk.org
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Reviewed-by: Gagandeep Singh <g.singh@nxp.com>
Add DEV_RX_OFFLOAD_RSS_HASH flag for all PMDs that support RSS hash
delivery.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes 'maybe-uninitialized' warnings reported by compiler
when using LTO.
Compiler warning pointing to this error (with LTO enabled):
error: ‘kg_cfg.extracts[0].masks[0].mask’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
extr->masks[j].mask = cfg->extracts[i].masks[j].mask;
Fixes: 16bbc98a3e ("bus/fslmc: update MC to 10.3.x")
Cc: stable@dpdk.org
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
In the packet transmit, if the QBMAN is not able to process the
packets, the Tx function loops infinitely to send the packet out.
This patch changes the logic retry for some time (count) and then
return.
Fixes: cd9935cec8 ("net/dpaa2: enable Rx and Tx operations")
Fixes: 16c4a3c46a ("bus/fslmc: add enqueue response read in qbman")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
This patch sets the port in mbuf for event scenarios as well
Fixes: b677d4c6d2 ("net/dpaa2: add API for event Rx adapter")
Fixes: 2d37886318 ("net/dpaa2: support atomic queues")
Fixes: 16c4a3c46a ("bus/fslmc: add enqueue response read in qbman")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
MC firmware is the core component of FSLMC bus and net/DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Earlier, there was a single MCP handle which was available across
complete DPAA2 driver as well as part of the dev_private which was
shared by the secondary process.
For secondary, that is not valid and it would require to open its
own handle for the MC. This is eventually used as part of the DPNI
configuration.
By using the process_private member of the rte_eth_dev, it is
possible to keep separate handles per process. Without worry of
overwriting when secondary process accesses the dev_private.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
This patch adds the support for PTP driver for
DPAA2 devices.
To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
