In virtio_pq_send_command() we check for a used descriptor
and wait in an idle loop until it becomes used. We can't use
vq->used_wrap_counter here to check for the first descriptor
we made available because the ring could have wrapped. Let's use
the used_wrap_counter that matches the state of the head descriptor.
Fixes: ec194c2f1895 ("net/virtio: support packed queue in send command")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
VIRTIO_F_ORDER_PLATFORM is required to use proper memory barriers
in case of HW vhost implementations like vDPA.
DMA barriers (rte_cio_*) are sufficent for that purpose.
Previously known as VIRTIO_F_IO_BARRIER.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for in-order path when meargeable buffers
feature hasn't been negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Use packed virtqueue format when reading and writing descriptors
to/from the ring.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This implements the transmit path for devices with
support for packed virtqueues.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When a guest is spanned on multiple NUMA nodes and
multiple Virtio devices are spanned onto these nodes,
we expect that their ring memory is allocated in the
right memory node.
Otherwise, vCPUs from node A may be polling Virtio rings
allocated on node B, which would increase QPI bandwidth
and impact performance.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
In case of running with not enough capabilities, i.e. running as
non-root user any application linked with DPDK prints the message
about IOPL call failure even if it was just called like
'./testpmd --help'. For example, this breaks most of the OVS unit
tests if it built with DPDK support.
Let's register the virtio driver unconditionally and print error
message while probing the device. Silent iopl() call left in the
constructor to have privileges as early as possible as it was before.
Fixes: 565b85dcd9f4 ("eal: set iopl only when needed")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
.dev_uninit calls .dev_stop and .dev_close. The work that is done in
those routines doesn't need repeated. Use started and opened to track
the adapter's status.
Fixes: c1f86306a026 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We need to check the status field in virtio net config structure
instead of the bits read from ISR register to know whether we need
to do guest announce.
Fixes: 7365504f77e3 ("net/virtio: support guest announce")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Register and unregister the virtio interrupt handler when the device is
started and stopped. This allows a virtio device to be hotplugged or
unplugged.
Fixes: c1f86306a026 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Brian Russell <brussell@brocade.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
With the enabling for hotplug on multi-process,
rte_eth_dev_pci_generic_remove can be used to detach the device from
a secondary process also. But we need to take care of the uninit callback
parameter to make sure it handles the secondary case correctly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Instead of checking the multiple Virtio features bits for
every packet, let's do the check once at configure time and
store it in virtio_hw struct.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
This patch improves the Tx offload features selection depending
on whether the application request for offloads.
When the application doesn't request for Tx offload features,
the corresponding features bits aren't negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The simple Tx path does not comply with the Virtio specification.
Now that VIRTIO_F_IN_ORDER feature is supported by the Virtio PMD,
let's use this optimized path instead.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
After IN_ORDER Rx/Tx paths added, need to update Rx/Tx path selection
logic.
Rx path select logic: If IN_ORDER and merge-able are enabled will select
IN_ORDER Rx path. If IN_ORDER is enabled, Rx offload and merge-able are
disabled will select simple Rx path. Otherwise will select normal Rx
path.
Tx path select logic: If IN_ORDER is enabled will select IN_ORDER Tx
path. Otherwise will select default Tx path.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
For virtio-user server mode, one use case comes across segmentation fault.
step 1: Launch vhost side as client firstly.
step 2: launch virtio-user side as server.
The cause is: after registering virtio_interrupt_handler into
eal-intr-thread, two threads (main thread and eal-intr-thread) have
sync issues, so add rxvq pointer checking in function virtio_notify_peers
to decide if the code can continue.
Fixes: bd8f50a45d0f ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If we want a virtio device to work in vDPA (vhost data path acceleration)
mode, we could add a "vdpa=1" devarg for this device to specify the mode.
This patch let virtio pmd skip device probe when detecting this parameter.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add checking for cvq to judge if virtio_ack_link_announce should be called.
The existing code doesn't cause issue, and add the checking just to look
more reasonable.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
It is necessary to add pointer checking because in some case the
code will cause crash. For example, the code goes here before
memory allocation of rxvq is finished.
Fixes: 7365504f77e3 ("net/virtio: support guest announce")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
virtio_dev_free_mbufs was recently modified to free the
virtqueues but failed to check whether the array was
allocated. Added a check to ensure vqs was non-null.
Fixes: bdb32afbb610 ("net/virtio: rationalize queue flushing")
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use the same kind of loop than in virtio_free_queues() and factorize
common code.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Free the previous queues and the attached mbufs before initializing new
ones.
The function virtio_dev_free_mbufs() is now called when reconfiguring the
device, so we also need to add a check to ensure that it won't crash for
uninitialized queues.
Cc: stable@dpdk.org
Fixes: 60e6f4707ef2 ("net/virtio: reinitialize device when configuring")
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When using vector Rx mode (use_simple_rx = 1), vq->vq_descx[] is not
kept up to date. To properly detach the mbufs in this case, browse
sw_ring[] instead, as it's done in virtqueue_rxvq_flush().
Since we need virtio_get_queue_type(), also move this function in
virtqueue.h as a static inline.
Fixes: fc3d66212fed ("virtio: add vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
On arm32, we were always selecting the simple handler, but it is only
available if neon is present.
This is due to a typo in the name of the config option.
CONFIG_RTE_ARCH_ARM is for Makefiles. One should use RTE_ARCH_ARM.
Fixes: 2d7c37194ee4 ("net/virtio: add NEON based Rx handler")
Cc: stable@dpdk.org
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When live migration is done, for the backup VM, either the virtio
frontend or the vhost backend needs to send out gratuitous RARP packet
to announce its new network location.
This patch enables VIRTIO_NET_F_GUEST_ANNOUNCE feature to support live
migration scenario where the vhost backend doesn't have the ability to
generate RARP packet.
Brief introduction of the work flow:
1. QEMU finishes live migration, pokes the backup VM with an interrupt.
2. Virtio interrupt handler reads out the interrupt status value, and
realizes it needs to send out RARP packet to announce its location.
3. Pause device to stop worker thread touching the queues.
4. Inject a RARP packet into a Tx Queue.
5. Ack the interrupt via control queue.
6. Resume device to continue packet processing.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This patch adds dev_pause, dev_resume and inject_pkts APIs to allow
driver to pause the worker threads and inject special packets into
Tx queue. The next patch will be based on this.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The virtio_send_command function may be called from app's configuration
routine, but also from an interrupt handler called when live migration
is done on the backup side. So this patch makes control queue
thread-safe first.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The max_mtu is kept as zero in case no CRTL channel, which leads
to failure when calling virtio_mtu_set().
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad056 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7a1 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The vector Rx will be broken if backend has consumed all
the descs in the avail ring before the device is started.
Because in current implementation, vector Rx will return
immediately without refilling the avail ring if the used
ring is empty. So we have to refill the avail ring after
flushing the elements in the used ring for vector Rx.
Besides, vector Rx has a different ring layout assumption
and mbuf management. So we need to handle it differently.
Fixes: d8227497ec5c ("net/virtio: flush Rx queues on start")
Cc: stable@dpdk.org
Reported-by: Antonio Fischetti <antonio.fischetti@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Antonio Fischetti <antonio.fischetti@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The rx_queues and tx_queues fields of the data structure points to a
struct virtnet_rx or virtnet_tx. Casting it to a virtqueue is an error.
It does not trigger any bug because pointer is not dereferenced inside
the function, but it can become a bug if this code is copy/pasted and
vq is dereferenced.
Fixes: 01ad44fd374f ("net/virtio: split Rx/Tx queue")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
DPDK has already the definition of Ethernet numeric link speeds in Mbps
in the file Rte_ethdev.h, it is unnecessary to rededine virtio specific
link speeds macros again.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
