Allow reprogramming of the RAR with a zero mac address,
to ensure that the VF traffic goes to the PF after
stop, close and detach of the VF.
Fixes: be2d648a2d ("igb: add PF support")
Fixes: d82170d279 ("igb: add VF support")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable promiscuous and allmulticast mode control from the VF using
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() and
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable().
For promiscuous mode host/PF igb driver should be built with
IGB_ENABLE_VF_PROMISC.
For allmulticast mode "allmulti" flag should be set for appropriate PF
ifconfig eth0 allmulti
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
There is a compilation issue with some compilers.
In i686 platform, long is 32bit, so XXX_CYCLECOUNTER_MASK
need define as 'ULL'
Fixes: 9c857bf6be ("igb: support ieee1588 functions for device time")
Fixes: 1c4445e1f2 ("ixgbe: support ieee1588 functions for device time")
Fixes: f3a4e40eca ("i40e: support ieee1588 functions for device time")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
If use DPDK PF + DPDK VF on igb NICs, we find the MAC address of VF
port is always 0. Because we forget to give it a value if this MAC
address is not assigned by PF. This patch'll assign a random MAC
address to igb VF port as ixgbe does.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector number may change during 'dev_start'.
Before enabling a new vector mapping,
it's necessary to disable/unmap the previous setting.
Fixes: fe685de2b1 ("igb: fix VF start with PF stopped")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes the crc bytes from byte counter statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This fixes a bug added to em and igb drivers which causes the pci info
seen by the primary process to become invalidated by secondary process
startup.
This call was added after the process type check in the other drivers.
Fixes: eeefe73f0a ("drivers: copy PCI device info to ethdev data")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add additional functions to support the existing IEEE1588
functionality and to enable getting, setting and adjusting
the device time.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Once posted through mailbox, we must check for nack from the PF
and report an error in this case.
Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When igb runs as a PF, mbox interrupt is prerequisite to make VF
start normally.
And PF sometimes won't 'dev_start', so the mbox interrupt register
during 'dev_init' is required.
The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'.
As UIO doesn't support multiple vector, mbox has to occupy the only one.
It adds condition check on 'dev_start', rxq interrupt is not allowed
when PF running in IOV mode via UIO.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
According to the VFIO interrupt mapping, the interrupt vector id
for rxq starts from RX_VEC_START.
It doesn't impact the UIO cases.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add xstats_get() and xstats_reset() functions to igb
driver, and the necessary strings to expose these
NIC statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Different NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Fix a misinterpreatation of VF statistic macro in e1000/igb.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Roger Melton <rmelton@cisco.com>
This patch enables igb TSO feature, the feature works on both PF and VF.
The TCP segmentation offload needs to write the offload related information
into the advanced context descriptors, which is similar to checksum offload.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch fixes a bug in reading the 64 bit register reading
which was causing the total octets counters to show zero.
Now the code reads both the lower and higher 32 bits.
Tested in testpmd, byte values are correct.
Fixes: 805803445a ("e1000: support EM devices (also known as e1000/e1000e)")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Ieee1588 reads system time to set its timestamp. On 1G NICs, for example,
i350, system time is disabled by default. It means the ieee1588 timestamp
will always be 0.
This patch enables system time when ieee1588 is enabled.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Any debug messages about hardware should be under debug (or removed)
and reduce customer visible log spam.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The patch does below for igb PF:
- Setup NIC to generate MSI-X interrupts
- Set the IVAR register to map interrupt causes to vectors
- Implement interrupt enable/disable functions
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Queues were freed in clear function called in stop function.
Split clearing and freeing in separate functions to
move queue freeing from stop to close function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_em_pmd,
rte_igb_pmd and rte_igbvf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
add function to support ethtool ops:
- get_reg_length
- get_regs
- get_eeprom_length
- get_eeprom
- set_eeprom
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- set_mac_addr
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add e1000/igb support for new ethdev APIs to enable and read
IEEE1588 PTP timestamps.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support querying hash key size per port, an new field of
'hash_key_size' was added in 'struct rte_eth_dev_info' for storing
hash key size in bytes.
The correct hash key size in bytes should be filled into the
'struct rte_eth_dev_info', to support querying it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Upcoming drivers will need to be able to support other bus types.
This is a transparent change to how struct eth_driver is initialized.
It has not function or ABI layout impact, but makes adding a later
bus type (Xen, Hyper-V, ...) much easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move e1000 pmd to drivers/net directory
As part of move, rename "e1000" subdirectory, which contains the code
from the "base driver", to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
