Specified pattern may be translated in different manner.
For example the pattern "eth / ipv4" can be translated to match
untagged packets only, since the pattern doesn't specify a VLAN item.
It can also be translated to match both tagged and untagged packets,
for the same reason.
This patch updates the rte_flow documentation to clearly specify the
required pattern to use.
For example:
To match tagged ipv4 packets, the pattern "eth / vlan / ipv4 / end"
should be used.
To match untagged ipv4 packets, the pattern "eth / ipv4 / end"
should be used.
To match all IPV4 packets, both tagged and untagged, need to apply
two rules with the patterns above.
To match both tagged and untagged packets of any type, the pattern
"eth / end" should be used.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
One new cmdline option `--rx-mq-mode` is added in order to have the
possibility to check whether PMD handle the mq mode correctly or not.
The reason is some NICs need to do different settings based on different
RX mq mode, i.e RSS or not.
With this support in testpmd, the above scenario can be tested easily.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
There is no way to report back a link speed of 200Gbps.
Adding 200G link speed.
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, when running start/clear stats&xstats/stop command many times
based on testpmd application, there are incorrect forward Rx/Tx-packets
stats as below:
---------------------- Forward statistics for port 0 --------------
RX-packets: 18446744073709544808 RX-dropped: 0 <snip>
TX-packets: 18446744073709536616 TX-dropped: 0 <snip>
--------------------------------------------------------------------
The root cause as below:
1. The struct rte_port of testpmd.h has a member variable "struct
rte_eth_stats stats" to store the last port statistics.
2. When running start command, it execute cmd_start_parsed ->
start_packet_forwarding -> fwd_stats_reset, which call
rte_eth_stats_get API function to save current port statistics.
3. When running stop command, it execute fwd_stats_display, which call
rte_eth_stats_get to get current port statistics, and then minus last
port statistics.
4. If we run clear stats or xstats after start command, then run stop,
it may display above incorrect stats because the current
Rx/Tx-packets is lower than the last saved RX/TX-packets(uint64_t
overflow).
This patch fixes it by clearing last port statistics when executing
"clear stats/xstats" command.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is no way to check the aging event or to get the
current aged flows in testpmd, this patch include those implements, it's
included:
- Add new item "flow_aged" to the current print event command arguments.
- Add new command to list all aged flows, meanwhile, we can set
parameter to destroy it.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds missing line about addition of AES-GCM/GMAC J0
capability to 20.05 release notes.
Fixes: 2165e2e9ea56 ("crypto/qat: support AES-GCM J0")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Updated SNOW3G and KASUMI PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The latest version of the Intel IPSec Multi-buffer library
adds an API to authenticate multiple buffers in parallel.
The PMD is modified to use this API, improving
performance of the ZUC-EIA3 algorithm.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Some wireless algos like SNOW, ZUC may support input
data in bits which are not byte aligned. However, not
all PMDs can support this requirement. Hence added a
new feature flag RTE_CRYPTODEV_FF_NON_BYTE_ALIGNED_DATA
to identify which all PMDs can support non-byte aligned
data.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
As more test cases are defined for execution, test scripts structure
needs to be reorganized, so fewer files are needed to describe the test.
To achieve that, new environment variables are incorporated into the
scripts.
Additionally, tests for mixed tunnel protocols are added.
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
rte_pci_probe() is private to the PCI bus.
Clean the remaining references in the documentation and comments.
Fixes: c752998b5e2e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
The existing documentation for Telemetry is updated, and further
documentation is added.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
This patch updates the MLX5 PMD and release notes documentations.
Adding the notes of the behavior change that rte flows organization
is switched into non-cached mode for applications.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This patch updates the MLX5 PMD and release notes documentations.
Adding the guideline for hairpin data buffer size configuration.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Currently, there is no flow aging check and age-out event callback
mechanism for mlx5 driver, this patch implements it. It's included:
- Splitting the current counter container to aged or no-aged container
since reducing memory consumption. Aged container will allocate extra
memory to save the aging parameter from user configuration.
- Aging check and age-out event callback mechanism based on current
counter. When a flow be checked aged-out, RTE_ETH_EVENT_FLOW_AGED
event will be triggered to applications.
- Implement the new API: rte_flow_get_aged_flows, applications can use
this API to get aged flows.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Refactor the code and make it easier to read. It's
useful for understanding the inflight APIs and how
packed ring works. Update the RST because the packed
ring patch has been merged to QEMU master and ring_packed
parameter changes to packed.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rewrite vectorized path selection logic. Default setting comes from
vectorized devarg, then checks each criteria.
Packed ring vectorized path need:
AVX512F and required extensions are supported by compiler and host
VERSION_1 and IN_ORDER features are negotiated
mergeable feature is not negotiated
LRO offloading is disabled
Split ring vectorized rx path need:
mergeable and IN_ORDER features are not negotiated
LRO, chksum and vlan strip offloadings are disabled
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Optimize packed ring Tx path like Rx path. Split Tx path into batch and
single Tx functions. Batch function is further optimized by AVX512
instructions.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Optimize packed ring Rx path with SIMD instructions. Solution of
optimization is pretty like vhost, is that split path into batch and
single functions. Batch function is further optimized by AVX512
instructions.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add new devarg for virtio user device vectorized path selection.
By default vectorized path is disabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Previously, virtio split ring vectorized path was enabled by default.
This is not suitable for everyone because that path does not follow
virtio spec. Add new devarg for virtio vectorized path selection. By
default vectorized path is disabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The goal is to make the table more readable.
Mark as partially supported features that are supported in
the generic Virtio driver but not in the vectorized ones.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Each PCTYPE can only have one specific FDIR input set at one time.
Add input set requirement info to i40e doc.
Bugzilla ID: 403
Fixes: 14c66a451ef7 ("net/i40e: flush tunnel filters")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Invert the current trace point headers logic by making
rte_trace_point_register.h include rte_trace_point.h.
There is no more need for a RTE_TRACE_POINT_REGISTER_SELECT special macro
since including rte_trace_point_register.h itself means we want to
register trace points.
The unexplained "provider" notion is removed from the documentation and
rte_trace_point_provider.h is merged into rte_trace_point.h.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding programmer's guide for Graph library and the inbuilt nodes.
This patch also updates the release note for the new libraries.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add IPv4 lookup process function for ip4_lookup node.
This node performs LPM lookup using simple RTE_LPM API on every packet
received and forwards it to a next node that is identified by lookup
result.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add ctrl api to setup ethdev_rx and ethdev_tx node.
This ctrl api clones 'N' number of ethdev_rx and ethdev_tx
nodes with specific (port, queue) pairs updated in their context.
All the ethdev ports and queues are setup before this api
is called.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Adding implementation for rte_graph_walk() API. This will perform a walk
on the circular buffer and call the process function of each node
and collect the stats if stats collection is enabled.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Graph architecture abstracts the data processing functions as
"node" and "link" them together to create a complex "graph" to enable
reusable/modular data processing functions.
These APIs enables graph framework operations such as create, lookup,
dump and destroy on graph and node operations such as clone,
edge update, and edge shrink, etc. The API also allows creating the
stats cluster to monitor per graph and per node stats.
This patch defines the public API for graph support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the graph subsystem.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Change rte_mempool_populate_iova() and rte_mempool_populate_virt() to
return 0 instead of -EINVAL when there is not enough room to store one
object, as it can be helpful for applications to distinguish this
specific case.
As this is an ABI change, use symbol versioning to preserve old
behavior for binary applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Now we need to add prefix like lib. to enable the log,
also changing val 8 to "debug"" which would be more descriptive.
Fixes: ffb9fd1b0808 ("log: update legacy modules dynamic logs regex")
Cc: stable@dpdk.org
Reported-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add some new types, such as eth/l2-src-only/l2-dst-only/svlan/cvlan/
l2tpv3/esp/ah/pfcp types into RSS hash commands, it could be used
to configure these rss input set by cmdline.
Example flow commands was:
testpmd>flow create 0 ingress pattern eth / ipv4 / l2tpv3oip / end \
actions rss types l2tpv3 end key_len 0 queues end / end
port config commands was:
testpmd>port config all rss l2tpv3
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The VF must be capable of configuring RSS. Add a virtchnl handler to
parse a specific RSS configuration, and process the configuration for
VFs, such as add or delete a RSS rule.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch adds FDIR create/destroy/validate function in AVF.
Common pattern and queue/qgroup/passthru/drop actions are supported.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
This patch allows to display flow stats in extended stats.
To do this, DMA-able memory is registered with the FW during device
initialization. Then the driver uses an alarm thread to query the
per flow stats using the HWRM_CFA_COUNTER_QSTATS HWRM command at
regular intervals and stores it locally which will be displayed
when the application queries the xstats.
The DMA-able memory is unregistered during driver cleanup.
This functionality can be enabled using the flow-xstat devarg and
will be disabled by default. The intention behind this is to allow
stats to be displayed for all the flows in one shot instead of
querying one at a time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
HWRM API allows drivers to query stats per PCI function.
These stats can provide some useful information in certain
circumstances.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
virtio driver already parses speed devarg. virtio-user should add
it to list of valid devargs and call eth_virtio_dev_init function
which init speed value.
eth_virtio_dev_init already is called from virtio_user_pmd_probe
function. The only change is required to enable speed devargs:
adding speed to list of valid devargs.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some applications like pktgen use link speed to calculate
transmission rate. It limits outcome traffic to hardcoded 10G.
This patch adds speed devarg which allows to configure
link speed of virtio device.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add memory pre-allocation note for vhost example when enabling
"builtin-net-driver".
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add ESP patterns to i40e_flow_parse_rss_pattern().
Update i40e PMD user guide with download link for esp-ah.pkg file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Support rte_flow RSS action on outer headers (level 0). RSS ranges on
the non-default port is OK.
Restrictions:
- The RETA is ignored. The hash function is simply applied across
the RSS queue range.
- The queues used in the RSS group must be sequential.
- There is a performance hit if the number of queues is not a power
of 2.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Define a device parameter to configure log 2 of a stride size for MPRQ
- mprq_log_stride_size. User is able to specify a stride size in a range
allowed by an underlying hardware. The default stride size is defined as
2048 bytes to encompass most commonly used packet sizes in the Internet
(MTU 1518 and less) and will be used in case a maximum configured packet
size cannot fit into the largest possible stride size. Otherwise a
stride size is set to a large enough value to encompass a whole packet.
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
