Currently, shutdown for l3fwd-power application is all over the place
and may or may not happen either in the signal handler or in the main()
function. Fix this so that the signal handler will only set the exit
variable, thereby allowing all of the loops to end properly and proceed
to deinitialize everything.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Currently, if power library initialization fails, only a log message is
displayed. This is suboptimal for a number of reasons, but the main one
is that telemetry mode does not depend on the power library and can
therefore run in environments where l3fwd-power would normally not run
correctly (such as inside a VM). This will lead to attempts to
deinitialize the power library on exit, with a subsequent forced unclean
shutdown of DPDK.
Fix this by only initializing the power library in modes that actually
need it, and change a log message to a failure to initialize.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Since all related queues' interrupts are turned on before epoll, we need
to turn off all the interrupts after wakeup. This patch fixes the issue
of only turning off the interrupted queues.
Fixes: b736d64787 ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Liang Ma <liang.j.ma@intel.com>
Tested-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Use RTE_DIM macro to calculate array size.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Some versions of pkg-config don't support the --path flag, which is not a
fatal error when building the apps. Without the flag, the makefile just
cannot track the .pc file of DPDK as a dependency of the build. Therefore,
we can ignore the error and suppress it by redirecting to /dev/null the
stderr from that call to pkg-config.
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Not all versions of pkg-config in distros have support for the
--define-prefix flag [1], causing errors when building examples manually or
with test-meson-builds.sh script [2].
For the former case, we need to remove the hard-coded use of the flag in
the Makefiles.
For the latter case, the flag is necessary for builds to succeed, so we
skip the tests when it's not present, passing it as part of the pkg-config
command if it is supported.
[1]
CentOS Linux release 7.7.1908 (Core)
pkg-config version 0.27.1
[2]
## Building cmdline
Unknown option --define-prefix
gmake: Entering directory
`...ild-x86-default/install-root/usr/local/share/dpdk/examples/cmdline'
rm -f build/cmdline build/cmdline-static build/cmdline-shared
test -d build && rmdir -p build || true
Unknown option --define-prefix
Unknown option --define-prefix
gcc -O3 main.c commands.c parse_obj_list.c -o build/cmdline-shared
main.c:14:28: fatal error: cmdline_rdline.h: No such file or directory
Fixes: ca9268529d ("examples: support relocated DPDK install")
Fixes: 7f80a2102b ("devtools: test pkg-config file")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Interrupt will not be received when disabling RX interrupt without
synchronization mechanism sometimes which leads to wake up issue.
Add spinlock to fix it.
Fixes: b736d64787 ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Marvin Liu <yong.liu@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There should not be blank lines at end of files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Modify l3fwd and related example apps to use locally defined port_conf
instead of global rte_eth_devices which is not a part of public API.
Apps should not be using internal DPDK data structures directly.
Fixes: 1ef9600b2d ("examples/l3fwd: convert to ethdev offloads API")
Fixes: ba8c103d24 ("examples/l3fwd-acl: convert to new ethdev offloads API")
Fixes: 40df1d7a69 ("examples/l3fwd-power: convert to new ethdev offloads API")
Fixes: 43fc038262 ("examples/l3fwd-vf: convert to new ethdev offloads API")
Fixes: 373149c631 ("examples/performance-thread: convert to new offloads API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Current implementation only outputs 3 numbers for busyness, 0, 50 and 100.
Fix this so that the 50% is replaced by a curve, more meaningful.
This can be replaced in each use case by a suitable calculation for
that use case.
Fixes: 609e79841f ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Samples apps that depend on the power library should not build if
the power library is not present. So now the following apps will
check to see if it's built, else skip building.
* l3fwd-pwer
* vm_power_manager
* guest_cli
Fixes: e013078857 ("examples/power: support meson/ninja build")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 issues caught by Coverity 343465
* Possible divide by zero on 3 lines
* Convert to float then back to int, losing precision on 3 lines
This patch modifies the code so that it only assigns calculated
values if the divisor is > 0, otherwise sets metrics to zero.
Also removes the un-needed round() function.
Coverity issue: 343465
Fixes: 609e79841f ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
Make versions before 4.2 did not have support for the .SHELLSTATUS
variable, so use another method to detect shell success.
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For testing of DPDK, we want to override the prefix given by the
pkg-config file, so that we can get correct paths for DPDK installed
in an unusual location.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add new telemetry mode support for l3fwd-power.
This is a standalone mode, in this mode l3fwd-power
does simple l3fwding along with calculating
empty polls, full polls, and busy percentage for
each forwarding core. The aggregation of these
values of all cores is reported as application
level telemetry to metric library for every 500ms from the
master core.
The busy percentage is calculated by recording the poll_count
and when the count reaches a defined value the total
cycles it took is measured and compared with minimum and maximum
reference cycles and busy rate is set according to either 0% or
50% or 100%.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The "make clean" command had a number of issues:
- the "--ignore-fail-on-non-empty" flag is not present on BSD
- the call to remove the build folder would fail if there was no build
folder present.
These are fixed by only removing the build folder if it exists, and by
using -p flag to rmdir in place of --ignore-fail-on-non-empty
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Most examples have in their makefiles a default RTE_TARGET directory to be
used in case RTE_TARGET is not set. Rather than just using a hard-coded
default, we can instead detect what the build directory is relative to
RTE_SDK directory.
This fixes a potential issue for anyone who continues to build using
"make install T=x86_64-native-linuxapp-gcc" and skips setting RTE_TARGET
explicitly, instead relying on the fact that they were building in a
directory which corresponded to the example default path - which was
changed to "x86_64-native-linux-gcc" by commit 218c4e68c1 ("mk: use
linux and freebsd in config names").
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch replaces the rte_exit routine with error printing when
init_power_library() fails and by that restores the previous behavior
of the program (which was to issue an error message and continue
working if init_power_library fails). This allows the user to still
experience the Rx interrupts feature of the DPDK demonstrated in
this program.
Fixes: f88e7c175a ("examples/l3fwd-power: add high/regular perf cores options")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: David Hunt <david.hunt@intel.com>
main.c(376): error #592: variable "lcore_id" is used before its value is set
RTE_SET_USED(lcore_id);
^
The variables were voided with RTE_SET_USED without an obvious reason.
Removing these voidings should avoid the icc error.
Fixes: a137d012 ("examples/l3fwd-power: support traffic pattern aware control")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the support for new traffic pattern aware power control
power management API.
Example:
./l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3
-P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1
Please Reference l3fwd-power document for full parameter usage
The option "l", "m", "h" are used to set the power index for
LOW, MED, HIGH power state. Only is useful after enable empty-poll
--empty-poll="training_flag, med_threshold, high_threshold"
The option training_flag is used to enable/disable training mode.
The option med_threshold is used to indicate the empty poll threshold
of modest state which is customized by user.
The option high_threshold is used to indicate the empty poll threshold
of busy state which is customized by user.
Above three option default value is all 0.
Once enable empty-poll. System will apply the default parameter if no
other command line options are provided.
If training mode is enabled, the user should ensure that no traffic
is allowed to pass through the system. When training phase complete,
the application transfer to normal operation
System will start running with the modest power mode.
If the traffic goes above 70%, then system will move to High power state.
If the traffic drops below 30%, the system will fallback to the modest
power state.
Example code use master thread to monitoring worker thread busyness.
The default timer resolution is 10ms.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Reviewed-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Added high/regular performance core pinning configuration options
that can be used in place of the existing 'config' option.
'--high-perf-cores CORELIST' option allow the user to specify a
high performance cores list; if this option is not used and the
'perf-config' option is used, the application will query the
system using the rte_power library in order to get a list of
available high performance cores. The cores that are considered
high performance are the cores that have turbo enabled.
'--perf-config (port,queue,hi_perf,lcore_index)'
option is similar to the existing config option, the cores are specified
as indices for bins containing high or regular performance cores.
Example:
l3fwd-power -l 6,7 -- -p 0xff \
--high-perf-cores 6 --perf-config="(0,0,0,0),(1,0,1,0)"
cores 6 and 7 are used, core 6 is specified as a high performance core.
port 0 queue 0 will use a regular performance core, index 0 (core 7)
port 1 queue 0 will use a high performance core, index 0 (core 6)
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Some Makefiles are using CONFIG_RTE_EXEC_ENV and others
are using CONFIG_RTE_EXEC_ENV_LINUXAPP.
Use the latter one for consistency.
We could remove CONFIG_RTE_EXEC_ENV later if considered useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
The basic operations for ports enumeration should not be
considered as experimental in DPDK 18.05.
The iterator RTE_ETH_FOREACH_DEV was introduced in DPDK 17.05.
It uses the function the rte_eth_find_next_owned_by() to get
only ownerless ports. Its API can be considered stable.
So the flag experimental is removed from rte_eth_find_next_owned_by().
The flag experimental is removed from rte_eth_dev_count_avail()
which is the new name of the old function rte_eth_dev_count().
The flag experimental is set to rte_eth_dev_count_total()
in the .c file for consistency with the declaration in the .h file.
A lot of internal applications are fixed to not allow experimental API.
Fixes: 8728ccf376 ("fix ethdev ports enumeration")
Fixes: d9a42a69fe ("ethdev: deprecate port count function")
Fixes: e70e26861e ("net/mvpp2: fix build")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Marchand <david.marchand@6wind.com>
When building with meson, set build to false when building unsupported
example apps on FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
