Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
make rule test-basic is duplicate of test rule.
removed unused test-mempool and test-ring make rules.
Fixes: a3df7f8d9c ("mk: rename test related rules")
CC: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Makefiles are updated with new test case lists.
Test cases are classified as -
P1 - Main test cases,
P2 - Cryptodev/driver test cases,
P3 - Perf test cases which takes longer than 10s,
P4 - Logging/Dump test cases.
Makefile is updated with different targets
for the above classified groups.
Test cases for different targets are listed accordingly.
Cc: stable@dpdk.org
Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Replace the BSD license header with the SPDX tag for Makefiles
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Users can now use 'make defconfig' to generate a configuration using
the most appropriate defaults for the current machine.
<arch-machine-execenv-toolchain>
arch taken from uname -m
machine defaults to native
execenv is taken from uname, Linux=linuxapp, otherwise bsdapp
toolchain is taken from $CC -v to see which compiler to use
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This script generates cscope, gtags, and tags index files based on
EAL environment(architecture and OS(linux/bsd)).
Selection of the architecture and OS environment is based on dpdk
configuration target(T=).If EAL environment(T=) is not specified,
the script generates tag files based on available source code.
Usage: make tags|cscope|gtags|etags [T=config]
example usage:
make cscope
make tags T=x86_64-native-linuxapp-gcc
make gtags T=arm64-armv8a-linuxapp-gcc
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
There was a typo in the .PHONY for the test-build target. If we fix the
typo, the test-build target does not work, because it won't match the
'%' target anymore.
So just remove the .PHONY.
Fixes: 64592d97c1 ("mk: do not build tests by default")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make rules renamed to a common syntax, test-x:
fast_test -> test-fast
ring_test -> test-ring
mempool_test -> test-mempool
perf_test -> test-perf
These are to run various sub-set of the unit tests.
Not touched to make rules that are already following the syntax:
test-basic
test-build
test
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since "make test" and "make test-build" does dependency resolving, they
check for all dependent components (lib and drivers) which takes a few
seconds.
This is a good feature during development, but if the target is only
running unit test, that step is unnecessary, it is possible to compile
once and run unit test multiple times, without checking any code update.
For this purpose, a new make rule "make test-basic" added. Which only
runs the unit test, expects that unit test already compiled.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Don't build tests with default "make" command.
Require explicit command to build tests because not everybody interested
in running unit tests.
Following changes done in make rules:
"make test-build" <--- Added
"make test" <--- Updated functionality (build + run basic tests)
Now "make test" builds all tests and runs unit test (test).
Thanks to dependency resolving, it is possible to call "make test"
directly after config, "make test" will compile dependent components
(lib and drivers, but not apps).
And a new "make test-build" make rule added which will build
tests but not run unit test. "make test-build" has same dependency
resolving features with "make test"
To include "test" folder into makesystem, existing ROOTDIRS- variable
is used instead of hardcoding folder name into makefiles, current usage
of ROOTDIRS* variables are:
ROOTDIRS-y <-- root level folders prepared and compiled by default
ROOTDIRS- <-- root level folders prepared but not compiled by default
The preparation is required for dependency resolving and cleaning.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Verbosity is considered enabled when $V is not empty.
It is a well spread shortcut in makefiles, see git grep '$(if $(*V'
So V=0 and V=1 are equivalent.
It is fixed by unsetting V when it is 0.
A side effect is to fix kernel module compilation verbosity
which is set to 0 when V is empty.
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In order to ease packaging support of changes in DPDK build system,
introduce a decimal integer to compare version numbers.
It does not show the minor numbers as it is not meaningful for packaging.
Usage for DPDK 16.04:
% make showversionum
1604
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Provides new sub-rules to install runtime and sdk separately.
The build directory must be changed from BUILD_DIR to O in install
rules to avoid a bad recursive effect (O being BUILD_DIR being O + T).
Suggested-by: Mario Carrillo <mario.alfredo.c.arevalo@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The real installation was called "binary install" and was done
after the build when DESTDIR was specified.
Remove this limitation and move the code in install rule only.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The multi-target install create some subdirectories with the target name
which is not standard for a "make install" procedure.
The uninstall procedure cannot be applied properly (without removing
all files in a directory). It would need to pre-compute paths.
As it is a packaging issue, it is removed from the build system capabilities.
The variable BUILD_DIR is also renamed to RTE_OUTPUT used in other files.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
It is not possible to test every configs on an unique machine.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It is now possible to build all projects from the examples/ directory
using one command from root directory.
Some illustration of what is possible:
- build examples in the DPDK tree for one target
# install the x86_64-default-linuxapp-gcc in
# ${RTE_SDK}/x86_64-default-linuxapp-gcc directory
user@droids:~/dpdk.org$ make install T=x86_64-default-linuxapp-gcc
# build examples for this new installation in
# ${RTE_SDK}/examples directory
user@droids:~/dpdk.org$ make examples T=x86_64-default-linuxapp-gcc
- build examples outside DPDK tree for several targets
# install all targets matching x86_64-*-linuxapp-gcc in
# ${RTE_SDK}/x86_64-*-linuxapp-gcc directories
user@droids:~/dpdk.org$ make install T=x86_64-*-linuxapp-gcc
# build examples for these installations in /tmp/foobar
user@droids:~/dpdk.org$ make examples T=x86_64-*-linuxapp-gcc O=/tmp/foobar
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The goal of this rule is to show which rules/options are available from a
"make" command.
Let's start by printing short doc about SDK building.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Allow to list configs in config/ directory with a simple make rule.
The rule showconfigs is reused in config error.
In the same time, "echo -n" is replaced by the more portable "printf".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The version string is extracted from rte_version.h.
RTE_VER_* macros are concatenated and separators " . . r " are inserted.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
- add index page
- add doxygen configuration for API
- add doxygen CSS customization applied by a script
- HTML generation via make rules
The configuration is splitted in a static file and a make rule in order to
dynamically configure output format and path.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
It seems that doc/ has been removed so these rules are useless.
This clean-up is preliminary to generate some doc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rte.sdkroot.mk is mainly calling other makefiles.
These redirecting rules can be factorized by called makefile.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
